Sharkoon Bandit Manuale utente
MANUAL
BANDIT
Content
1. Features
2. Fan configuration
3. Package contents
4. The case at a glance
5. Installation of a mainboard
6. Installation of a PSU
7. Installation of a HDD
8. Installation of an optical device
9. Installation of an additional 3.5" device
10. Installation of an add-on card
11. The pre-installed fans
12. Installation of additional fans / optimized airflow
13. The docking station for SATA HDDs in the case’s top panel
Dear customer!
Congratulations for purchasing one premium quality SHARKOON product.
For a long life time and to take full advantage of this product we recommend that
you read this manual completely.
Have a good time with our product!
SHARKOON Technologies
1. Features
• ATXcase
• 5x5.25"drivebays(external)
• 3x3.5"drivebays(internal)
• TopI/Owith2xUSB2.0,1xeSATA,1xheadphoneand1xmicrophone
connector,powerandresetbuttonaswellasLEDsforpowerandHDDactivity
• InstalledSATAdockingstationincasetop(for2.5"and3.5"HDDs)
• Pre-installedcardreaderwithUSB2.0connector(supportedcardformats:
SD/SDHC,MS,MMC,CF)
• 7slotsforadd-oncards
• Meshfrontpanelforoptimizedcooling
• Quickfastenersforopticaldrives
• Dimensions:485x485x200mm(LxHxW)
• Weight:~6.6kg
2. Fan configuration
Case front 1x120mmLEDfanwith3-pinand4-pinconnector
(pre-installed)
Side panel 2x140mmor2x120mmfans(optional)
Backsideofcase 1x120mmor1x80mmfan(optional)
Top panel 1x180mmLEDfan(pre-installed)
3. Package contents
• ATX-case“Bandit”(1x120mmLEDfaninthecasefront,
1x180mmLEDfaninthetoppanelandcardreaderpre-installed)
• Accessorykit:
Stand-offs for
mainboard
Screws for drive/
mainboard mounting
Screws for HDD/
PSU mounting
Screws with
coarse thread
BANDIT
Thumb screws
(pre-installed)
Quickfastenersfor
optical drives
(pre-installed)
Lockattachment(A),speaker
(B)andplasticcasefeet
(black,self-adhesive/C)
Mountingframefor3.5"
devices 5.25" bezel with opening for 3.5" devices
Note:
If you are missing any of the items listed above, please contact customer
4. The case at a glance
Front view
A – Pre-installed card reader
B – 5.25"mountingbays
C – behindthefrontbezel:
pre-installed120mmLEDfan
View from above
A – Top I/O
a – Reset button
b – 1xeSATAconnectorand
c – 2xUSB2.0connectors
d – Power button
e – SATA docking station
f – LEDs
g – 1xheadphoneand
microphone connector
B – Pre-installed
180mmLEDfan
Sideview(closed/left)
A – Fan brackets
(120mmand140mm)
A
A
A
A
BB
B
C
C
ab
c
de
fg
BANDIT
Sideview(opened/left)
A – Mountingbaysfor5.25"
devices
B – Mainboardmounting
panel
C – Installation opening for
CPU coolers
D – QuickfastenersforODDs
E – RemovableHDDcage
Backsideview
A – Opening for I/O shield
B – Fanbracketfor80mmor120mmfan
C – Slot bezels
D – PSU bracket
E – Thumbscrews
The internal cables and connectors
A – CardreaderUSB
connector
B – Audioconnectorsfor:
a – HD Audio
b – AC’97
C – Connectorsfor(f.l.t.r):
Power Switch
Reset Switch
PowerLED+
HDDLED
PowerLED–
D – USBconnectorofthe
USBfronthub
E – eSATAconnector
F – 3-pin and 4-pin fan
connector
A
A
B
B
C
C
D
D
EE
E
EE
E
ab
A B C D
E
F
BANDIT
3. Remove the mainboard and screw the stand-offs into the respective drillings
ofthemountingpanel(g.3).
(Stand-offs)
fig. 3
4.PresstheI/Oshield(deliveredwiththemainboard)intotheI/Oshield
opening in the case’s back side.
5. Place the mainboard back onto the stand-offs and screw the mainboard to
them(g.4).
(Screwsformainboardmounting)
fig. 4
Note:
For more information on how to install the intended devices, refer to their
respective documents.
5. Installation of a mainboard
1. Open the case by loosening the thumb screws on the case’s back side and
removingtheleftsidepanel.Laydownthecasesidewiseonanevensurface.
2. The mainboard’s mounting panel inside the case provides various drillings to
xthestand-offs(g.1).
fig. 1
Themainboardcontainsspecialscrewopenings(g.2).
fig. 2
Place the mainboard to the mounting panel. A stand-off must be screwed
into every drilling of the mounting panel visible through the mainboard’s
screw openings.
BANDIT
6. Plug the connectors of the case’s front bezel to the respective connectors of
themainboard(alsorefertoyourmainboard’smanualforfurtherinformation).
Note:
The eSATA cable connected to the front eSATA connection should not exceed
50 cm of length otherwise transmission errors may occur! With premium
quality eSATA cables this maximum length may be exceeded.
6. Installation of a PSU
1. Set up the case in front of you and put the PSU from the inside against the
PSUbracketonthecase’sbackside(g.5).
fig. 5
2.ScrewthePSUtothecasefromtheoutside(g.6).
(ScrewsforPSUmounting)
fig. 6
7. Installation of a HDD
1. Remove the case’s right side panel.
2.Removethefrontbezel’sxationscrewsonbothsides(g.7).
fig. 7
3.Removethecase’sfrontpanelbygentlydraggingittowardsyou(g.8).
fig. 8
BANDIT
4.LoosentheattachmentscrewsoftheHDDcage(g.9).
fig. 9
5.DragtheHDDcagetothefrontandoutofthecase(g.10).
fig. 10
6.SlidetheHDDintoamountingbayoftheHDDcageandxateitfromboth
sides(g.11).
(ScrewsforHDDmounting)
fig. 11
7. Slide the HDD cage back into the case and screw it from both sides
(g.12and13).
fig. 12
fig. 13
8. Connect the HDD to the power supply and the mainboard.
BANDIT
8. Installation of an optical device
(1.Removethecase’sfrontpanelbygentlydraggingittowardsyou(g.14).)
fig. 14
2. Dismantle the 5.25" front bezel from the mounting bay in which you intend
to install the drive by loosening its screws and pushing the bezel to the
inside(g.15).Removethequickfasteners(g.16).
fig. 15 fig. 16
(Carefullytakeoutanoptionallypresentmetalbezelcoveringthe3.5"drive
baybyusingagripper.)
3.Slidetheopticaldriveintothecase’sdrivebay(g.17).
fig. 17
4.Attachtheopticaldevicefrombothsidesusingthequickfasteners(g.18).
fig. 18
Note:
If you intend to transport the case we recommend securing (additionally) the
installed drives:
(Screwsfor5.25"drivemounting)
5. Connect the optical drive to the power supply and the mainboard.
(Putthefrontbezelbackontothecase.)
BANDIT
9. Installation of an additional 3.5" device
(1.Removethecase’sfrontpanelbygentlydraggingittowardsyou(g.19.)
fig. 19
2. Dismantle the 5.25" front bezel from the mounting bay in which you intend
to install the drive by loosening its screws and pushing the bezel to the
inside(g.20).Removethequickfasteners(g.21).
fig. 20 fig. 21
(Carefullytakeoutanoptionallypresentmetalbezelcoveringthedrivebay
byusingagripper.)
3. Place the 3.5" device into the mounting frame for 3.5" devices and screw it to
themountingframefrombothsides(g.22).
(Mountingframefor3.5"devices)
fig. 22
4. Slide the mounting frame with installed 3.5" device into the case’s drive bay
(g.23)andattachittothedrivebayfrombothsidesusingthequick
fastenersforODDs(g.24).
fig. 23 fig. 24
Note:
If you intend to transport the case we recommend securing (additionally) the
installed drives.
BANDIT
5. Connect the 3.5" device to the power supply and the mainboard.
6. Screw the 5.25" bezel with 3.5" opening into the front panel and place it back
onto the case.
(5.25"bezelwith3.5"opening)
10. Installation of an add-on card
1. Presstheslotbezeloutofitsattachment(g.25).
fig. 25
2. Insert the add-on card into the mainboard’s respective slot and screw it to
thecase(g.26).
(Screwwithcoarsethread)
fig. 26
11. The pre-installed fans
1. The pre-installed case fans provide a 4-pin PSU connector and a 3-pin
mainboard plug each.
2.ConnectoneofbothplugstoeithertherespectivePSUor(tocontrolthefan
speedviathemainboard)thematchingmainboardconnector.
12. Installation of additional fans / optimized airflow
1. Placethefanagainsttherespectivebracketfromtheinside(e.g.theback
side/g.27).
fig. 27
Indice
Altri manuali Sharkoon Accessori per computer
Sharkoon
Sharkoon ELITE SHARK CA300T Manuale utente
Sharkoon
Sharkoon 8-BAY RA ID STATION Manuale utente
Sharkoon
Sharkoon TG5 RGB Manuale utente
Sharkoon
Sharkoon VG7 Manuale utente
Sharkoon
Sharkoon RUSH POWER M Manuale utente
Sharkoon
Sharkoon VAYA Manuale utente
Sharkoon
Sharkoon VG6 Series Manuale utente
Sharkoon
Sharkoon Skiller SGC1 Manuale utente
Sharkoon
Sharkoon RGB FLOW Manuale utente
Sharkoon
Sharkoon MS140 Manuale utente
