Sharp PN-HW751 Manuale utente
PN-HW751 Dismantle Instruction
1
Dismantle Instruction
LCD MONITOR
MODEL
PN-HW751
701
PN-HW751 Dismantle Instruction
2
Table of contents
1. Scope.................................................................................................................. 3
2. Tools for dismantling............................................................................................... 3
3. Dismantle Procedure .............................................................................................. 3
4. Back covers .......................................................................................................... 4
5. Printed circuit boards ............................................................................................. 5
6. Battery................................................................................................................ 5
7. LCD Module .......................................................................................................... 6
8. Capacitors............................................................................................................ 7
9. Parts List ............................................................................................................. 7
PN-HW751 Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove Printed circuit boards (section 5)
3. Remove Battery (section 6)
4. Dismantle LCD (section 7)
5. Remove Electrolyte Capacitors (section 8)
PN-HW751 Dismantle Instruction
4
4. Back covers
Back cover can be removed by screw driver.
PN-HW751 Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Main I/F PWB (1pcs) Power PWB (1pcs)
LED driver PWB (1pcs) T-CON PWB (1pcs)
6. Battery
This model uses only AAA battery for remote control.
Battery can easily be removed.
PN-HW751 Dismantle Instruction
6
7. LCD Module
- LCD Dismantle procedure
1. Remove Rear cover
2. Remove PWBs and Tray
3. Remove the Cables
LCD
PN-HW751 Dismantle Instruction
7
8. Capacitors
Electrolyte Capacitors which diameter/height is larger than 25mm is installed
on Power PWB and LED driver PWB.
These capacitors can be removed by using nipper to cut the leads.
On Power PWB
On LED driver PWB
9. Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
Parts
Note
LCD
75inch LCD module
Printed Circuit Boards
Main I/F PWB
Power PWB
LED driver PWB
T-CON PWB
Battery
AAA battery
Electrolyte capacitors
(height >25mm, diameter >25mm)
On Power PWB
On LED driver PWB
External electric cables
2 kinds of Power Cord
- for EU
- for UK
Indice
Altri manuali Sharp Monitor
Sharp
Sharp PN-80TH5 Guida utente
Sharp
Sharp PN-T322B Manuale utente
Sharp
Sharp PN-V601A Manuale utente
Sharp
Sharp PN-V602 Guida utente
Sharp
Sharp PN-E601 Manuale utente
Sharp
Sharp TL-M5200 Manuale utente
Sharp
Sharp LL-T15S3 Manuale utente
Sharp
Sharp PN-HS431 Manuale utente
Sharp
Sharp PN-Q601 Manuale utente
Sharp
Sharp PN-V550A Guida utente
Sharp
Sharp IV-08MP Manuale utente
Sharp
Sharp PN-T322B Guida utente
Sharp
Sharp LC-121M2E Manuale utente
Sharp
Sharp LL-T1810A Manuale utente
Sharp
Sharp InGlass PN-LA862 Guida utente
Sharp
Sharp PN-V601A Guida utente
Sharp
Sharp PN-85TH1 Manuale utente
Sharp
Sharp PN-465U Manuale utente
Sharp
Sharp PN-V550 Guida utente
Sharp
Sharp PN-70HC1E Guida utente
