Sharp PN-R606 Manuale utente

PN-R606 Dismantle Instruction

Dismantle Instruction

LCD MONITOR

MODEL

PN- R606

PN-R606 Dismantle Instruction 

 
Table of contents 
 
Scope.................................................................................................................. 3 
Tools for dismantling............................................................................................... 3 
Dismantle Procedure .............................................................................................. 3 
Back covers .......................................................................................................... 4 
Printed circuit boards ............................................................................................. 5 
Battery................................................................................................................ 5 
LCD Module .......................................................................................................... 6 
Capacitors............................................................................................................ 7 
Parts List ............................................................................................................. 7

PN-R606 Dismantle Instruction

1. Scope

This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.

2. Tools for dismantling

Below tools are required to dismantle this product.

- Screw Driver

- Nipper

3. Dismantle Procedure

This product can be dismantled by below steps.

1. Remove Back covers (section 4)

2. Remove the shielding

3. Remove Printed circuit boards (section 5)

4. Remove Battery (section 6)

5. Dismantle LCD (section 7)

6. Remove Electrolyte Capacitors (section 8)

PN-R606 Dismantle Instruction

4. Back covers

Back cover can be removed by screw driver.

PN-R606 Dismantle Instruction

5. Printed circuit boards

All PWBs can be removed by screw driver.

Main I/F PWB (1pcs) Power PWB (1pcs) LED driver PWB (1pcs)

T-CON PWB (1pcs) OPS PWB (1pcs)

6. Battery

This model uses AAA battery for remote control and CR2032 Lithium Coin battery on Main I/F PWB.

-The remote control battery can be easily removed.

-The battery CR2032 on the main I/F PWB can be easily removed from the battery holder.

PN-R606 Dismantle Instruction

7. LCD Module

- LCD Dismantle procedure

1. Remove Rear cover

2. Remove PWBs and Tray

3. Remove the Cables

LCD

PN-R606 Dismantle Instruction

8. Capacitors

Electrolyte Capacitors which diameter/height is larger than 25mm is installed on Power PWB.

These capacitors can be removed by using nipper to cut the leads.

On Power PWB

9. Parts List

Parts described in Annex VII of directive 2012/19/EU are as below.

Parts

Note

LCD

60inch LCD module

Printed Circuit Boards

Main I/F PWB

Power PWB

LED driver PWB

T-CON PWB

OPS PWB

Battery

AAA battery

Lithium Coin Battery CR2032

Electrolyte capacitors

(height >25mm, diameter >25mm)

On Power PWB

External electric cables

2 kinds of Power Cord

- for EU

- for UK

Indice

Altri manuali Sharp Monitor

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione