Sharp IQ-8920 Manuale utente

Congratulations on purchasing the

IQ-8900/lQ-8920

unit.

Please read this operation manual thoroughly to

familiarize yourself with all the features of the unit and to

ensure years of reliable operation. You may also find it

useful to keep this operation manual on hand for

reference.

The only difference between the IQ-8900 and the

IQ-8920 is memory capacity.

Unless otherwise specified, the text and materials in

this manual apply to both models,

One of the models or certain accessories described in

this manual may not be available in your country when

you purchase this product.

Check with your local SHARP dealer concerning

availability.

All company and/or product names are trademarks and/or

registered trademarks of their respective manufacturers.

NOTICE

l SHARP

strongly recommends that separate permanent

written records be kept of all important data. Data may

be lost or altered in virtually any electronic memory

product under certain circumstances. Therefore,

SHARP assumes no responsibility for data lost or

otherwise rendered unusable whether as a result of

improper use, repairs, defects, battery replacement, use

after the specified battery life has expired, or any other

cause.

SHARP assumes no responsibility, directly or indirectly,

for financial losses or claims from third persons

resulting from the use of this product and any of its

functions, such as stolen credit card numbers, the loss

of or alteration of stored data, etc.

The information provided in this manual is subject to

change without notice.

open the unit.

Open

Press the lock button and

open the unit.

remove/replace

the

touch

pen.

To remove the touch pen,

which is installed at the front

right of the unit, pull in the

direction indicated.

To replace the touch pen,

slowly push the pen point

back into place (push in the

opposite direction to that

indicated), then check the

pen is safely secured.

Take

c&-e

to ensure the

ridge grip on the touch

pen aligns correctly with

the mounting slot.

Caution:

Use only the attached touch pen to operate with the

display.

Do not use a pencil or any other sharp pointed object,

and always keep the point of the touch pen and the

display clean, to prevent scratching and damage to the

display.

Display

angle

adjustment

The display can be adjusted

to any angle to make reading

easy.

uick

Start

Important

things

do:

Please read through this Quick Start section even if you hate

to read operation manuals. The Quick Start section will get you

up and running with your unit in just a few minutes. Refer to

the rest of the manual for more details about a particular

operation.

Please read through the section for answers to commonly

asked questions. There is a good chance that any general

questions you have about your unit will be answered there.

13(

Press (2nd)

when you need help using a particular

application on the unit. The on-screen help is a quick

reference guide explaining various controls and their functions.

Installing

(or

replacing)

the

batteries

Set the battery replacement switch

on the back of the unit to “REPLACE

BATTERIES” (exposing the red dot).

(Fig. 1)

Slide off the operation battery cover.

(Fig. 1)

replacement

Insert the two batteries atop the

ribbon tab, as shown. (Fig. 2)

switch

Replace the operation battery cover.

(Fig. 3)

Set the battery replacement switch to

“NORMAL OPERATION”. (Fig. 3)

If this is the first time you have

installed batteries in your unit,

proceed to the following steps.

While holding down the

[m]

key

on the keyboard, push the RESET

button on the back of the unit using

the touch pen or a similar object.

When a message appears, touch

to initialize the unit,

completely clearing the memory.

On average, you can expect to get about two months of

battery life based on one hour a day of constant use. Actual

battery life will vary depending on individual use.

See “Getting the Unit Up and Running,” Chapter 1, for

mor&

details.

Adjusting

the

touch

panel

Before using the unit, you should adjust the touch panel to ensure

optimal response when touching or writing on the display.

Press

and then

touch

to open the

TOOLS menu.

Touch [ADJUST LCD

on the TOOLS menu and

then touch

ADJUST TOUCH

PANEL1

the submenu.

LOCK/UNLOCK

ORGANIZER

quick

demo

1-1

time

Date

,,..\...

. .

?'.".::::z+..>

*.,.:.:<y:/;

ISET

DAILY ALARMS

at the left

MORE TOOLS

,JrnI

Touch all four of the

cross-points with the touch

ADJUST

TOUCH PANEL

pen.

Note: If the display is not

cleared from the screen,

verify that you have

touched each point.

(Points that have been

touched appear gray.)

Please

touch the exact

center

all

four

cross-points with the

organizer’s

pen.

See “Getting the Unit Up and Running,” Chapter 1, for more details.

Adjusting

the

LCD

contrast

You may find it necessary to adjust the LCD contrast to suit certain

lighting conditions.

(II

Press (MENU) and then

touch

-1

to open the

TOOLS menu.

2 Touch IADJUSTLCD

on the menu, then touch

ADJUST LCD CONTRAST]

the submenu.

3 Touch the buttons to

adjust the contrast to your

liking.

Note: If dark, horizontal

lines appear on the

display, then you have set

the contrast too dark.

Simply lighten it until the

lines disappear.

quick

demo

time

Date

the

left

(

ADJUST

LCD CONTRAST

To adjust the LCD contrast,

Press

[A]

[T].

Note: You can get here

directly

when the unit

off by

holding

down

the [MENU] key and then

pressing the [ON] key.

14)

Touch

when you are finished.

See “Getting the Unit Up and Running,” Chapter

for more details,

Setting

the

time

and

date

Press

[ON)

and touch

us1

(If the demo has already

been disabled, select SET

CLOCK from the TOOLS

menu, then select

ADJUST TIME/DATE from

the submenu.)

Welcome!

What

can

this

product

do?

Send

Faxes

anytime,

anywhere

Store

hundreds

names

and

numbers

Track

your

busy

aPPointment

SCHEDULE

Manase

all

wour

things

And

muc

much

more-

Tout

PAGE

see

quit

demo

Touch

ADJUST

set

the

time

Date

Touch

awlication

ker

the

left

start

orsanizins

your

busy

life

121

Touch

!$@&I

to set your

home city.

Press the first letter of the

name of your home

country, then press

until you find a city in your

time zone.

CHANGE

HOME CITY

Press

[SpACEI

jump

the

Touch the city to select it

and then touch

m].

NORFOLK

:USA

. . . . . . . . . . .

f...".."

.-.._

.._._-_."

..._._."

.._

..+"..."-

..-..,....-...........

iOKLAHO#A

CITY

tl!iiA

. . . . . . . . .

. . . . . . . . . . . . . .

"""

. . . . . . . . . . . . . . . . . . . .

i....

. . . . . . .

I._."

-....--..........

. . . .

.“..“....y”......“.”

-__......_..........-.

-....-...

“I

.._....._..........”

.._..

pL&!!?“!

.._

..-..

““..”

..-.................

151

Type the correct time and

then press

twice.

(For example:

[o)

(3)

14)

(5)

(%]

for

9:45

AM.)

Type the correct date and then touch

I=].

(For example:

(-6-j

(5)

(0)

(3)

(?-)

[-%i-]

(9)

(7)

for May

3, 1994.)

See “Getting the Unit Up and Running,” Chapter 1, for more details.

Disabling

the

demonstration

start-up

display

Your unit comes with a built-in demo which is turned on by default.

You will most likely want to shut this off at this time.

Press

Im)

and then

touch

to open the

TOOLS menu.

Touch

~SET

START-UP DISPLAY].

Touch OFF in the box next

to START-UP to disable

the demo start-up display.

If you want your name, number

and address to be displayed on

start-up, touch ON instead of OFF.

GLOBE is the default start-up

display. To paste in a picture you

have copied from Scrapbook,

select USER’S and then

type

(2ndl[7%%%]

~~g:i$:E;~k;;,

LOCK!UNLOCK

ORGANIZER

quick

demo

SET

START-UP DISPLAY

START-UP

EACKGROUNO

USER'S PICTURE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

USER'S

[Paste picture here]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ASK

PASSVORDI

[9ili

OWNER

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TEL NUMBER

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ADDRESS

Type in your name, number, and-

address here.

Touch

to save all the changes.

See “Setting the Start-Up Display,” Chapter 9, for more details.