Sharper Image SI670 Manuale utente
TV Everywhere!™
SI670 Instructions
Read and save these instructions.
T
W
w
r
o
e
a
d
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image Design product.
We appreciate your business very much.
Please accept my personal assurance of your complete satisfaction
with this product’s quality and performance. We offer generous
return privileges and excellent warranties on all our products.
For more than 25 years, The Sharper Image has shared the fun
of discovering innovative products that make life easier and more
enjoyable. We’ve been in business a long time because we are
an exciting place to shop and - just as importantly - we strive to
deliver great customer service that exceeds your expectations.
Enjoy your purchase!
Respectfully,
Richard Thalheimer
Founder, Chairman and Chief Executive Officer
Shop our complete Internet catalog.
T
W
Introduction............................................................................... 6
Quick Start ................................................................................ 8
Receiver/Monitor ................................................................... 8
Transmitter/Tuner ................................................................... 9
Source Selection .................................................................. 10
Channel Programming ......................................................... 11
Viewing Stand and Wire Brackets ........................................ 12
General Instructions................................................................. 15
Parts Diagram ...................................................................... 15
Operation Overview ............................................................ 19
Setup ................................................................................... 21
Mode Selections .................................................................. 24
Programming Remote Functions........................................... 30
Special Features ................................................................... 32
Troubleshooting ....................................................................... 33
Statement of FCC/DHHS Compliance...................................... 34
FCC Label Compliance Statement ........................................... 35
Warranty.....................................................................Back Cover
Table of Contents
The TV Everywhere!™is a full-featured TV, “split” into two parts:
1. The tuner/transmitter connects to an audio/video source
(cable, VCR, DVD player, etc.), interprets the signal and for-
wards the picture and sound to the receiver.
2. The receiver is connected to and plays back through your TV.
The following items are included with the product:
•Tuner/Transmitter
•Receiver
•Remote Control
•AC Adapters for the tranmitter and the receiver
•Infrared Signal Device
•Assorted Cables
Introduction
6
T
w
f
T
The cables are color-coded to match equipment standards and
will allow you to connect to a video source in any of the
following ways:
•Directly to an existing unused coaxial cable.
•Split connection from an existing coaxial cable.
•To the audio/video out jacks of a VCR or DVD player.
•To the coaxial out jack of a VCR or TV.
•To audio/video input jacks for viewing on another TV or
monitor.
This instruction manual includes Quick Start instructions followed
by more detailed General Instructions and operating procedures.
Refer to the General Instructions if you have difficulty understand-
ing the Quick Start guide.
Introduction
7
Remote Control
1. Slide to open and remove the battery cover from the rear of
the remote control.
2. Install the two included AA batteries and replace the cover.
Transmitter/Tuner
1. Option 1: Connect the CABLE INPUT post on the transmitter/
tuner to a coaxial cable signal source. (Cable output post
can also be connected to a separate television in the room.)
Option 2: Connect the color-coded RCA posts on the
transmitter/tuner to the matching color output posts on a VCR,
DVD player or other video source.
Note: Connect using both options for maximum performance.
2. Connect the AC adapter to the AC INPUT/POWER jack and
a 110V household outlet.
3. To turn on the unit, press the ON/OFF button.
Quick Start
8
1. Connect the color-coded RCA posts on the receiver to the
matching input posts on your remote television set.
2. Connect the AC adapter to the DC POWER jack and to a
110V household outlet.
Receiver
9
Cable In
Television Out
(Standard/Wired Connection)
Television Out
(Wireless)
TRANSMITTER/TUNER
RECEIVER
T
4
1. Press the POWER ON/OFF button on the the Tuner/
Transmitter first, then the Receiver POWER ON/OFF button.
2. To activate the mode options, press the MODE SELECT button
on the remote (or the receiver front panel). Input Source TV,
Video, VCR3 or VCR4 appear on the screen.
3. To select the appropriate source option, press the UP/DOWN
buttons on the remote (or the receiver front panel):
•TV: If you are connected to a coaxial cable or a VCR coaxial
post set to TV mode.
•VCR3 or VCR4: If you are connected to your VCR coaxial
post set to VCR mode.
•Video: If you are connected to an RCA post of a video
source.
Note: In all modes except TV, the channel and viewing are
controlled by the viewing source’s (VCR, DVD player, etc.)
remote. The receiver/remote CHANNEL /buttons can be
programmed to mimic two functions of the source remote while
operating in the Video, VCR3 or VCR4 modes. (See Programming
Remote Functions in the General Instructions.)
Source Selection
10
Indice
