Sharper Image 206051 Manuale utente
Item No. 206051
PORTABLE EVAPORATIVE COOLER
Owner’s Manual
Thank you for choosing the Sharper Image Portable Evaporative Cooler.
Please read this manual carefully before you use the product and keep it safely
reserved for future reference.
- 1 -
PARTS IDENTIFICATION
HOW TO USE
1. Misting Outlet
2. Front Rotary
3. Control Panel
4. Negative Ions Outlet
5. Front Panel
6. Water Level Indicator
7. Base
8. Handle
9. Back Rotary
10. Back Panel
11. Mosquito Repellent Slot
12. Detachable Water Tank
13. Outfall
14. Wheel
1. Before using, make sure the unit is placed on a stable surface. Use the same power supply and
voltage as mentioned on the rating label on the back side of the product. Once the product is
plugged in, the buzzer will beep once then the LED display will illuminate a few seconds later.
The unit will enter standby mode once the power indicator lights up.
2. Switch on: When the unit is stationary, press the “On/Off’ button, the buzzer will beep twice.
Choose your preferred fan speed by pressing the “speed” button on the control panel or on
the remote controller.
3. Wind speed adjustment: Choose from Low, Medium and High. The relative wind circulation
can be set from the control operation on the panel.
1
8
9
10
11
12
13
14
2
3
4
5
6
7
- 2 -
OPERATION METHODS FOR WATER TANK
CAUTIONS
1. Detach the water tank at a 45° angle.
2. Unscrew the tank cover and fill the tank with water.
3. Place the water tank back into the unit at a 45 °angle.
4. You will hear a “click” sound when positioned and
secure. NOTE: Please make sure the water tank
and unit are fastened to avoid any
damage while transporting.
1. Unplug the unit before refilling with water and cleaning.
2. This unit is not intended for use by children or people with reduce physical, sensory
or mental capabilities, or lack of experience and knowledge.
3. If the supply cord is damaged contact Sharper Image Customer Service team.
HOW TO USE (CONT’D)
4. Swing mode adjustment: Press the “Swing” button on the control panel or remote controller,
it will start the auto swing function. The unit will move from left to right to circulate air.
Press the “Swing” button again to turn it off.
5. Oscillation mode adjustment: Press the “Oscillation” button on the control panel or remote
controller, it will start the auto oscillation function. The unit’s front rotary will move in a circular
motion. Press the “Oscillation” button again to turn it off.
6. Ionizer function: Lightly press the “Ion” button to switch on the function. Press the button again
to switch off the function.
7. Humidifier/ Misting function: Press the “Mist” button on the control panel or on remote controller.
The display screen will show the humidification pattern. The green light indicates normal humidifier
function and the red light indicates when the water tank needs to be refilled. Press the button
again to turn off the mist function.
8. Ultrasonic Mosquito Repellent function: Press the “Mosquito” button. The display screen will
show the logo to indicate that the Mosquito function is on. Press the button again to switch off
the function. This function works independently in fan mode or in standby mode. Optional: Insert a
mosquito repellent tablet (not included) into the Mosquito Repellent Slot at the back of the unit.
9. Timer function: Press the “Timer” button on the control panel or remote controller to set the time.
Each time you press the timer button the display screen will show the input time you set.
The timer can be set 0.5 hour to 9.5 hours with intervals of 1 hour each. (0.5, 1, 1.5 hours up
to 9.5 hours). Press the ‘Timer” button once again to turn off the timer function.
10. Remote controller function: The remote controller operates the MIST, SWING, TIMER, SPEED
and ON/OFF functions of the unit. It works with 2 X AAA batteries (not included).
- 3 -
MAINTENANCE AND CLEANING
TROUBLESHOOTING
PRODUCT SPECIFICATION
1. Turn the unit off and unplug before cleaning.
2. Do not immerse the plug or unit into any liquid.
3. Use a wet towel soaked with water and mild detergent to clean the body of the unit.
Do not scratch the unit during cleaning.
4. Optional: add a few drops of mild citric acid and water into the water tank for 5-10 minutes
to remove any dirt in the water tank.
5. If the unit will not be used for a long period of time, empty the water tank and let it dry before storing.
Problem Possible cause Solution
The unit does not turn on. 1. The unit is incorrectly
plugged in.
2. Incorrectly pressing the
on/off button.
3. Motor damage.
1. Properly plug the unit in.
2. Press the on/off button.
3. Repair is needed.
The unit will not swing. 1. Incorrectly pressing the
Swing button.
2. Motor damage.
1. Find the right switch
and press the Swing button.
2. Repair is needed.
Abnormal Noise 1. Debris inside.
2. Fan blades loose.
3. Motor damage.
1-2. Turn the fan off and
contact Sharper Image
customer service.
3. Repair is needed.
No mist 1. Water tank is empty.
2. Mist vibrator may be damaged.
3. Water level sensor may
be damaged.
1. Fill water tank
2 & 3. Repair is needed.
Mist volume is insufficient 1. Water is dirty.
2. Mist vibrator is dirty.
1. Replace with clean water.
2. Repair is needed.
Item No 206051
Voltage/frequency 110V-60HZ
Water tank capacity 1.6L
Rated Power 80W
Body Weight 6.0KG
- 4 -
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. For Customer Service, please call 1 (877) 210-3449.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
Altri manuali Sharper Image Congelatore
