Sharper Image SMP558-4 Manuale utente
Touch MP3 Video Player
SMP558-4
4
GB
User Guide
In the box
USB Cable
Quick Start Guide CD (User Guide &
Video converter)
Touch MP3 Video Player
V
i
d
e
o
C
o
n
v
e
r
s
i
o
n
S
o
f
t
w
a
r
e
Installation CD
Pro Headphones
1
Features & Location of controls
•4 GB memory
•Touch 2.8” high resolution display
•Built-in speaker
•Stores & plays music, video, and pictures
•Digital voice recorder
1. Headphone jack
2. Power button [ ]
3. Power switch [ ] - quickly turn the player off
4. USB port
5. Stylus - use as another option to navigate the touch
screen
6. Display
7. Micro SD slot
VOLUME
UP/DOWN
LOCK/UNLOCK
BUTTON
MAIN MENU
1
2
7
3
5
4
TOPTOP
6
Features:
Supported les:
Music - MP3, WMA, OFF, APE, FLAC, and WAV
Video - RM, VVD, WMV, and FLV (converted videos)
Pictures - JPEG, BMP, GIF, PNG, and TIFF
2
Basic operation
After turning on your MP3
Player, you will see the main
menu.
Touch an option to select it.
browser
video
photos record
settings
music
switch, your last changes in the settings will be lost, and
the player will not remember the last song played.
Turning on/of
•To turn on the player place the [ ] switch to the “ON” position, and press and HOLD the [ ] button for 3 seconds until the LCD screen
lights up.
•To turn the player off, press and HOLD the [ ] button until the LCD screen shuts off, or place the [ ] switch to the “OFF” position.
3
3
Connecting to a computer
Disconnecting the USB cable:
1. Open the “Safe Device Removal” icon in the task bar, on the
lower right corner of the screen.
2. Select “USB Device” and click “Stop.”
3.
device,” disconnect the USB cable from your computer.
Important: to avoid any data loss, always perform a safe USB device
extraction before disconnecting the USB cable.
• System requirements:
• Pentium 200 MHz or above
• Microsoft Windows 2000/ME/XP/Vista/ Windows 7
• USB port
PC connection:
In order to enjoy the multimedia capabilities of your MP3 Player, you
have to first copy files from your PC to its internal memory.
Connect your MP3 Player to the computer using the included USB 2.0
cable. The device will be detected automatically without installing any
driver. Once detected, you can read/write to the device’s memory just
as if you were using a regular disk drive.
Make sure your computer is powered on, and follow the steps below
to connect the player to your computer.
1. Plug the larger USB connector of the USB cable into the USB port
on the computer.
2. Plug the other end (small) of the USB cable to the player.
3. The computer system detects “New hardware” and starts to install
the driver automatically. Wait for the system to finish the installation.
When it has finished, “MP3” will be created in “My Computer”.
4
Micro SD cardCharging the battery
The player supports Micro SD cards (not included), which allow you to
add up to 16 GB of additional memory to your MP3 Player.
To insert the Micro SD card:
1. Insert the Micro SD card into the card slot at the bottom of your
player, with the with the metal contacts facing up towards the front
of the player, and gently push it in until it clicks. Do not apply
excessive force, as this may damage your MP3 Player and Micro
SD card.
2. To view files on your Micro SD card, touch “browser” from
the Main menu and select “SD CARD”.
3. To remove the Micro SD card, gently push it in until it pops out.
Your MP3 Player has an integrated rechargeable Li-ion battery. It is
recommended to fully charge the player before using it for the first
time. Recharge the battery by connecting the player to a computer
using the included USB cable. Charging time is between 3-5
hours,
depending if the player is powered off or working. To keep the
battery in good condition, we recommend not charging it for more
than 8 hours.
• Do not use force while inserting or removing the Micro SD card.
• Do not remove the card during file transfers.
• Make sure the player is turned off before inserting or taking
out the card.
Charging
Charging . . .
Micro SD
5
Do not disconnect the USB cable when transferring les,
as doing so may damge your Mp3 Player and your les.
Transferring media to the player
YourMP3Player is capable of storingandplaying your favoritemusic,
photosandvideo.
To transfer media from your computer:
1. Connect your MP3 Player to your computer using the included
USB cable.
2. Open “Windows Explorer” or “My Computer,” and locate “MP3.”
3. Drag and drop, or copy and paste your media files into “MP3”
When you are done, disconnect your MP3 Player from the computer
using the “Safe Device Removal” utility in the taskbar.
*Screenshots above may be slightly dierent
MP3 (G:)
MP3
Drag or cop here
Drag or copy files here
Locate “MP3”
than your computer’s operating system.
The “RECORD”folder stores and organizes all your recorded
voice memos only.
6
(do not drag the files into the “RECORD” folder).
Music
1. Select “music” from the main menu.
2. Select a music file from either “All Songs”, “Aristis, ”Albums” or “My Favorites”.
3. Use the [] or [ ] button to select a music file and press “OK”, the “Now Playing screen” appears.
4. Use the [ back] button to go to previous screens or return to the main menu.
Now
Playing
Artists
Albums
My Favorites
Update
All Songs
Music
Music Main
Refresh & update
the player
Back to
previous screen
Jump to currently
playing song
Menu scroll up/down
Now Playing
Play mode
Artist/album/song
title display
Elapse time
counter
Volume up
Next
Volume down
Previous
Repeat mode
Volume level
EQ setting
Play
Pause
Sade/Soldier of Love
Be That Easy
In OrderRepeat All
00:00 -03:38
ROCK
25
7
It is possible to delete music les from “browser” in the main
menu or by connecting the player to your computer, and
deleting from there.
Windows Media Player allows you to organize your media collection,
Player is not installed on your computer, you can get the latest version
by going to
www.microsoft.com/windows/windowsmedia/player/download/
Getting music from your CDs onto your computer:
You can use Windows Media Player to copy, or “Rip”, music from
your audio CDs.
1. Open Windows Media Player.
2. Click on the “Rip” tab.
3. Insert a music CD into your computer’s CD drive.
4. Click the checkboxes to select which tracks to Rip.
5. Click “Start Rip.”
Using Windows Media Player
Click the“Rip” tab.
Click“Start Rip”
8
Windows Media Player is an easy way to add, or “Sync,”
music to your MP3 Player.
1. Open Windows Media Player.
2. Connect your MP3 Player to the computer using the USB cable.
3. Click on the “Sync” tab in Windows Media Player.
4. Drag media files to your MP3 Player withinWindows Media Player.
5. Click the “Start Sync” button.
Syncpicturesto yourMP3 Player
Sync music to yourMP3 Player
Click
on the
Category
button
and
select
Pictures
Drag
your
pictures
here
Click“StartSync”
Click the
“Sync”
tab
Click“StartSync”
Syncin progress
Drag
your
songs
here
MP3
You may also transfer/delete music or other media les by
dragging or copying them directly into your player, see
“Transferring media to the player” on page 6.
9
Altri manuali per SMP558-4
1
Indice
Altri manuali Sharper Image Lettore MP3
