- 2 -
HOW TO CHARGE YOUR LAPTOP AND TABLET TRAY WITH BUILT-IN CHARGER
HOW TO CHARGE DEVICES WITH THE
LAPTOP AND TABLET TRAY WITH
BUILT-IN CHARGER
LED LIGHTS
CAUTION
1. Connect the USB cable to input labeled IN on the product.
2. Plug the end of the USB the cable into the charging device (your computer can charge
the Laptop and Tablet Tray with Built-in Charger).
3. The LED lights will blink blue when the device starts to charge.
4. After it is fully charged, press the power button to turn off.
1. Connect the USB cable to the output
labeled OUT1A or OUT2A port.
2. Plug the end of the USB into your device to
charge (ex: smartphone).
3. The LED lights will blink blue when the
device starts to charge.
4. Press the power button on the Laptop and
Tablet Tray with Built-in Charger to turn off.
Blinking blue- Normal charging
Blue- Stand-by or full
1 blue lights- Battery capacity 0-25%
2 blue lights- Battery capacity 25-50%
3 blue lights- Battery capacity 50-75%
4 blue lights- Battery capacity 75-100%
1. Do not expose this product to high temperature, such as sunshine, fire, etc.
2. Do not put it in water or other liquids.
3. Do not drop this product.
4. Do not use extension cable and/or overload printed circuit board.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our
Customer Service department at 1 (877) 210-3449. Customer Service agents are available
Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
