Sharper Image Slide and Negative Converter Manuale utente
Item No. 205369
SLIDE AND NEGATIVE CONVERTER
Owner’s Guide
TABLE OF CONTENTS
Introduction / Precautions......................................................2
FCC Notice..............................................................................3-4
Included Accessories...............................................................4
Identification of Parts..............................................................5
Installing the Battery Pack.....................................................6
Charging the Battery Pack.................................................7-8
Loading the Slide and Film Holders.....................................8
Operating the Slide and Negative Converter...............9-12
Power Saving Mode...............................................................12
Adjusting the Exposure.................................................12-13
Playback Mode.......................................................................13
Delete Mode............................................................................14
Formatting an SD Card........................................................14
Connecting to a Computer..................................................15
Viewing Images on a TV................................................15-16
Specifications.................................................................16-17
Icons and Indicators............................................................18
System Requirements.........................................................19
Battery Disposal....................................................................19
Warranty/Customer Service...............................................19
- 1 -
INTRODUCTION
PRECAUTIONS
Thank you for purchasing the Sharper Image Slide and
Negative Converter. This device will help you to digitize
and preserve your favorite slides and film negatives.
Please take a moment to read through this Owner’s Guide,
and store it for future reference. With a little practice and
experience, you will be able to convert your cherished
family slides and film negatives to digital files quickly
and efficiently.
• Do not try to open the Slide and Negative Converter
or attempt to modify it in any way.
• Keep this device away from water and other liquids.
• Keep this device out of the reach of children.
• Use only the supplied power accessories. Use of other
accessories may lead to overheating, distortion of the
equipment, fire, electrical shock or other hazards.
• This device may become slightly warm during use. This
does not indicate malfunction.
• If the exterior of the Slide and Negative Converter
needs cleaning, wipe it with a soft, dry cloth.
- 2 -
- 3 -
To comply with the limits for a Class B Digitize device,
pursuant to Part 15 of the FCC Rules, this device must
only be installed on computer equipment certified to
comply with the Class B limits. This unit may contain a
microcomputer for signal processing and control function.
In very rare situations, severe interference, noise from
CAUTION
FCC NOTICE
This equipment has been tested and found to comply with
the limits for a Class B Digitize device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy. If not installed
and used in accordance with the instruction, it may cause
harmful interference to radio communication. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment on or off, the
user is encouraged to try to correct the interference by
one or more of the following suggestions:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and
the receiver.
• Connect the equipment to a different power outlet other
than the one where the receiver is connected.
• Consult an experienced television or radio technician
for help.
- 4 -
SLIDE AND NEGATIVE CONVERTER
AC POWER ADAPTOR
CLEANING BRUSH
USB CABLETV CABLE
SLIDE HOLDER
35 MM NEGATIVE HOLDER
- Slide and Negative
Converter
- Owner’s Guide
- 35mm Negative Holder
- Slide Holder
- USB Cable
- AC Power Adapter
- Cleaning Brush
- TV Cable
- 4GB SD Memory Card
(not shown)
INCLUDED ACCESSORIES
an external source, or static electricity may cause it to
lockup. In the unlikely event that this should happen, turn
off the unit, wait at least five seconds, and then turn it
back on again.
IDENTIFICATION OF PARTS
- 5 -
- 6 -
INSTALLING THE BATTERY PACK
Open the battery compartment cover by lightly pressing
and sliding it back as shown.
Insert the supplied battery. Make sure the (+ and -) ends
of the battery match to the polarities indicated in the
battery compartment. Snap the cover back into place.
- 7 -
CHARGING THE BATTERY PACK
The battery is not charged at the time of purchase. Please
charge the battery at least 5.5-6 hours prior to first use.
You may charge the battery in 2 ways:
1. Plug the included USB cable into the device and
then plug the other end into a USB port on a
computer (Fig. A).
2. Use the included AC adapter to plug the device directly
into an AC outlet (Fig. B).
FIG. A
FIG. B
- 8 -
LED INDICATOR
STATUS LED INDICATOR
BATTERY STATUS
LOADING THE SLIDE AND FILM HOLDERS
The Red LED will turn on during charging. When the
battery pack is fully charged, the Red LED light will turn
off and you may disconnect the charging cable.
Red: The device is OFF and the battery is charging.
Purple: The device is ON and the battery is charging.
Blue: The device is turned ON.
Be sure that the glossy surface is facing upward (toward
the ceiling).
• Open the media holders as shown:
• Place your media into the holder and close the holder.
NOTE: This device converts:
• 35mm slides (color or black and white)
• 35mm negatives (color)
• 35mm negatives (black and white)
EMPTYFULL
OPERATING THE SLIDE AND NEGATIVE CONVERTER
1. Insert the included SD memory
card into the SD card slot.
2. Press the Power button to power
on the device.
3. Insert the loaded slide/negative holder into the slot
according to the ∏or •sign shown on the device.
Power button
- 9 -
Indice
Altri manuali Sharper Image Scanner
