Sheffield PLA0405 Manuale utente

2-SLICE COOL TOUCH

TOASTER PLA0405

Instruction Manual

Due to on-going product improvements, specifications and accessories may change without notice.

Actual product may differ slightly to that depicted.

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Carefully read this manual before using this appliance.

Ensure that you know how the appliance functions and how to operate it.

Maintain the appliance in accordance with the instructions to ensure that it functions properly.

Keep this manual with the appliance. If the appliance is to be used by a third party, this

instruction manual must be supplied with it.

The safety instructions do not by themselves eliminate any danger completely and proper

accident prevention measures must always be used.

No liability can be accepted for any damage caused by non-compliance with these instructions

or any other improper use or mishandling.

Do not use this appliance if it has been dropped or damaged in any way, or if the supply cord is

damaged.

This appliance is intended to be used in household and similar applications such as:

–staff kitchen areas in shops, offices and other working environments;

–farm houses;

–by clients in hotels, motels and other residential type environments;

–bed and breakfast type environments.

PACKAGE CONTENTS

1 x Cool Touch Toaster

1 x Instruction Manual

1 x Warranty Card

Confirm all parts before disposing of carton. Safely dispose of all plastic bags and other

packaging components. They may be potentially dangerous to children.

TECHNICAL SPECIFICATION

Model PLA0405

220-240V ~ 50/60 Hz

700-800 Watts

GENERAL AND ELECTRICAL SAFETY

When using electric appliances always observe safety regulations where applicable to reduce

the risk of fire, electric shock and personal injury.

Always check that the power supply corresponds to the voltage on the rating plate.

Supply Cord and Plug

Always unplug from mains supply when not in use. Do not abuse or damage the power cord. If

the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a

similarly qualified person in order to avoid a hazard.

Supervision

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

Water

Do not immerse appliance in water. Do not immerse any part of this appliance or supply cord in

water. Do not use with wet hands or use in damp situations.

Use and Environment

Do not use outdoors. Do not use directly below a socket outlet. This appliance is not intended

to be operated by means of an external timer or separate remote-control system.

Earth Safety

This appliance must be earthed. Only connect to a suitably earthed 220-240V ~ 50Hz supply

socket.

Damaged or Dropped

Always inspect your appliance before use. Check parts are correctly attached. Do not use this

appliance if it has been damaged, dropped, left outdoors or dropped in water. Return it to an

authorised service dealer for examination and repair

Fire Risk / Hot Surface

The temperature of accessible surfaces may be high when the appliance is operating.

The bread may burn, therefore do not use the toaster near or below combustible material, such

as curtains. The toaster should be attended when in use.

DIAGRAM

1. Bread slots

2. Reheat button

3. Defrost button

4. Carriage Lever

5. Cancel button

6. Variable browning control

7. Crumb tray

OPERATION

Always place the toaster on a stable heat resistant surface. Do not operate on an inclined

surface. Keep away from any curtain, cupboard or other combustible material. The temperature

of accessible surfaces may be high when the appliance is operating.

DO NOT LEAVE TOASTER UNNATENDED WHILE IN USE. BREAD MAY BURN.

Normal Toasting

1. Connect to a suitable 220-240V ~ 50/60Hz power supply. This appliance must be earthed.

2. Use your toaster once without bread. This will pre-heat the new elements and burn off any

dust which may have accumulated during storage.

3. Select the desired level of browning on the browning control marked 1 to 6. The setting

required will vary according to the moisture content and thickness of bread. For best results

ensure that the bread slices are of even thickness, freshness and size. Remember that stale

bread toasts more rapidly than fresh and thin bread toasts quicker than thick. See additional

points for more information.

4. After selecting the desired browning level, place your bread in the bread slots and depress

the bread carriage lever downwards until it locks. Note: The bread carriage lever will not

stay down unless the toaster is plugged in and the wall switch is on.

5. After the set degree of brownness has been reached the bread will pop-up automatically,

ready for removal from the slots. The bread carriage lever will have returned to its upper

position and the heating element will have switched off, ready for the next toasting. If the

first slices are not dark enough turn the browning control to a higher setting.

If the bread in your toaster becomes jammed disconnect your toaster at the socket,

allow it to cool, and then remove the bread.

When not in use, switch your toaster off at the mains and remove the plug from the socket.

DO NOT WRAP THE CABLE AROUND THE MAIN BODY OF THE APPLIANCE DURING

OR AFTER USE.

Using the cancel setting

If you wish to interrupt the toasting process, press the cancel button.

Using the re-heat button

If your toast has popped up and gone cold, the toaster offers a re-heat facility. To use, depress

the bread carriage lever and press the re-heat button immediately. The light next to the button

will illuminate and the toaster will operate for a short period re-heating the bread.

Using the Frozen button

To toast frozen bread, do not adjust the browning control, place the bread normally in the

bread slot, depress the bread carriage lever and press the defrost bread button

The light next to the button will illuminate and the toaster will automatically toast for an

extended period.

Crumb tray

Crumbs will accumulate in the crumb tray and could catch fire if not emptied periodically. When

the toaster has cooled down completely, tap the sides of the case lightly to dislodge any crumbs

lodged in the toasting chamber and pull out the crumb tray .Empty the tray and replace it.

NOTE: Never operate the toaster without the crumb tray fitted.

Additional points

In order to achieve uniform browning, we recommend you wait a minimum of 30 seconds

between each toasting, so that the control can automatically be reset.

If toasting one slice only, you may need to adjust the browning control to a slightly lower

setting.

Note you will also notice a slight variation in toast colour on one side of a single slice.

Stale bread toasts more rapidly than fresh bread. The browning control should be set at a

lower setting than usual.

All sorts of bread can be used as well as teacakes, small rolls etc. Slices should not however

be so thick as to cause burning or jamming within the bread slot.

When toasting 2 slices it is recommended they are of equal size and freshness.

Allow the toaster to cool fully before putting away.

Cleaning and Maintenance

Regular maintenance of your appliance will keep it safe and in proper operational order.

Before Cleaning

After use and before cleaning, always disconnect the appliance from the mains supply, remove

the plug from the wall socket and wait for the toaster to cool.

Cleaning

1. Wipe the outside of the toaster with a damp cloth only and dry with another cloth or tissue.

NEVER use metal polish or coarse scouring agents and never immerse your toaster in

any sort of liquid.

NEVER use any pointed or sharp articles for cleaning the inside; otherwise the heating

element will be damaged.

NEVER use a brush or push your fingers or metal objects down the slots.

2. Do not allow breadcrumbs to build up in this toaster as they may present a fire hazard.

Remove the Crumb Tray and clean away breadcrumbs after use.

Ventilation Safety Slots

Always keep the ventilation safety slots clear from blockage. Failure to keep these vents clear

may result in overheating.

Damage Check

Always check that the appliance is in good working order and that any safety guards and

removable parts are secure. Check the power supply cord and plug regularly for cuts or

damage.

Store in a Safe Place

When not in use store your appliance and all its accessories and instruction manual in a safe

and dry place.

Indice

Altri manuali Sheffield Tostapane

Sheffield

Sheffield PL841 Manuale utente

Manuali Tostapane popolari di altre marche

Taurus

Taurus ARCTIC 960648 Manuale utente

Redfox

Redfox TO 920 G Manuale utente

Moulinex

Moulinex LS340D11 Manuale utente

Amica

Amica TD 3021 Manuale utente

Electrolux

Electrolux EAT978 Manuale utente

SEVERIN

SEVERIN SA 9275 Manuale utente

Breville

Breville the Big One BTS100 Manuale utente

Sunbeam

Sunbeam TA2540 Manuale utente

ARENDO

ARENDO 305716 Manuale utente

Life

Life Crispy AT-001 Manuale utente

Beko

Beko TAM 6201 I Manuale utente

Zephir

Zephir ZHC485 Manuale utente

H.Koenig

H.Koenig TOS9 Manuale utente

ZIEGELMULLER

ZIEGELMULLER Ritter ET 10 Guida del prodotto

HURAKAN

HURAKAN HKN-TOP3 Manuale utente

Philips

Philips HD2565 Manuale utente

Bosch

Bosch DesignLine Plus TAT4P44 GB Series Manuale utente

Panasonic

Panasonic NT-ZP1-V Manuale utente