Shenchen Precision Pump YZ35-PPS Manuale utente

Shenchen Precision Pump

Manual of YZ35 PPS Pump Head

Baoding Shenchen Precision Pump Co.,Ltd

DOMINIQUE DUTSCHER SAS

Note:

Please read the manual carefully before operating the product.

Warning:

Tubing may have crack due to wear. It results in the overflow of fluid

from tubing. In that time human body and instruments may be

damaged. So user must check usually and change tubing in time.

When changing the tubing or the position of the tubing, please stop the

pump head rotating, otherwise fingers or clothes may be caught.

There are moving parts of the pump head inner, before opening the

upper block, it must be carried out according to the following

requirements:

Ensure the pump is isolated from the main power supply.

Ensure there is no pressure in tubing.

If the tubing gets mistakes, ensure the liquid in the tubing is

discharged to other containers or drain tubing.

If transports the dangerous liquid, must wear the protective

clothing and eye protection.

DOMINIQUE DUTSCHER SAS

Catalogue

1. Product Introduction .............................................................................. - 1 -

2. Instructions .............................................................................................- 1 -

3. Installation Dimension ...........................................................................- 7 -

4. Pump Head Specification .......................................................................- 8 -

5. Troubleshooting ..................................................................................... - 9 -

6. Maintenance .........................................................................................- 10 -

7. Warranty and After Service ..................................................................- 11 -

DOMINIQUE DUTSCHER SAS

Shenchen Pump YZ35-PPS Pump Head

- 1 -

1. Product Introduction

Easy-load pump head is very convenient to install the tube clamp. Following

customers’ requirements, it can connect with multichannel, suitable for OEM

supporting application. YZ35 pump head is made by pps--Polyphenylene sulfide

material which makes it more outstanding in rigidity and structural performance. It has

super high temperature resistance and anti-corrosion, especially in strong chemical

corrosion resistance such as organic solvents, which effectively reduces the damage

rate of the pump head and greatly reduces the customer's repair and maintenance costs.

2. Instructions

DOMINIQUE DUTSCHER SAS

Shenchen Pump YZ35-PPS Pump Head

- 2 -

2.1 Pump Head Installation

2.1.1 Single Pump Head Installation

First the coupling is installed on main shaft of the pump head, tighten the M5

screws after positioning according to the size shown in the figure, as shown,

and then connect the pump head to the drive shaft through the coupling.

2.1.2 Multiple Pump Head Installation

A plurality of YZ35 pump heads are used with extended screws in tandem,

with 2 pump heads as an example. First, the coupling is mounted on the main

shaft of the tandem pump head 1, tighten the M5 screws, and then install the

cushion on the shaft head of the pump head 2, next insert the shaft end of

pump head 2 into the shaft groove of pump head 1. Connect the serial

connected pump head to the drive with extended screws as shown below.

DOMINIQUE DUTSCHER SAS

Shenchen Pump YZ35-PPS Pump Head

- 3 -

Note:

When install the pump, the entire pump head is disassembled into two separate

pump heads as shown in the picture above. The two pump head roller

assemblies should be staggered and installed in sequence. The wheel status is

as shown in the figure below.

The main shaft connection between two adjacent pump heads needs to install a

shock absorber as shown in the figure. Failure to do so will result in abnormal

operation of the pump head.

Note: Users need to fasten the screws with similar force, and can’t be too tight,

to avoid the lower support deform and make working noise.

DOMINIQUE DUTSCHER SAS

Shenchen Pump YZ35-PPS Pump Head

- 4 -

2.2 Tube Installation

2.2.1 Tube Clamp

Function of the tube clamp: It can better fix the tube and reduce tube

shaking, besides improve the transmission stability and transmission

accuracy. Effectively reduce tube wear and extend tube life.

Tube Clamp Type: 26#, 73#, 82#, as below:

2.2.2 Tube Installation

Pull the lever anti-clockwise 180°, open the upper block.

Draw two lines with a distance of 186mm on the tube.

Put the tube between rollers and upper block, the line faces up.

DOMINIQUE DUTSCHER SAS

Shenchen Pump YZ35-PPS Pump Head

- 5 -

Sleeve the tube into the tube clamp, the sharp point of the tube clamp

should be align at the line. Pay attention to ensure that the split surfaces

of the two tube clamps are parallel and parallel to the installation surface

of the pump head.

Clip slot of two tube clamps into the slideway of the pump head, press

hard until it can't be pressed. At this time, the tube clamp is not installed

in place.

Sharp corner

DOMINIQUE DUTSCHER SAS

Shenchen Pump YZ35-PPS Pump Head

- 6 -

Pull the lever clockwise and slowly press down until the upper block is

pressed down. At this time, the tube clamp is also installed in place.

2.3 YZ35 Pressure Adjustment

YZ35 pump head can adjust pressure of the tube outlet by the rotary knob on

pump head body, rotate with the arrow direction, pressure enlarge, otherwise

reduce.

DOMINIQUE DUTSCHER SAS

Shenchen Pump YZ35-PPS Pump Head

- 7 -

3. Installation Dimension

DOMINIQUE DUTSCHER SAS

Indice

Altri manuali Shenchen Precision Pump Pompa dell'acqua

Shenchen Precision Pump

Shenchen Precision Pump N6 Series Manuale utente

Shenchen Precision Pump

Shenchen Precision Pump YZ35 Series Manuale utente

Shenchen Precision Pump

Shenchen Precision Pump ZG600x Manuale utente

Shenchen Precision Pump

Shenchen Precision Pump M6 Series Manuale utente

Shenchen Precision Pump

Shenchen Precision Pump Lab M Series Manuale utente

Shenchen Precision Pump

Shenchen Precision Pump YZ Series Manuale utente

Shenchen Precision Pump

Shenchen Precision Pump LabV Series Manuale utente

Shenchen Precision Pump

Shenchen Precision Pump V6-12L Series Manuale utente

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente