ShenZhen Keymantek K36 Manuale utente
K36 Hand-held Terminal
MANUAL
ShenZhen Keymantek Co.,Ltd.
2012
1
Warning ：Please read the followings before operating the terminal.
Do not take the battery out when it is charging.
Disassembling the terminal and/or any damage to the surface should void the warranty.
Keep the display screen free from any kind of stress. Keymantek is not responsible for
that damages.
Back up data in time.
Keymantek is not responsible for any loss because of losing data
when the terminal is using.
Keep the terminal away from static and/or strong electromagnetic radiation.
There is a lithium-ion battery in the terminal.
Do not try to disassemble ,crush or pierce
the battery. Dispose the battery according to local law or EHS guidance.
Do not install any other program,except permitted by Keymantek.
The material in this manual is subject to change without notice.
2
Chapter 1 Basic informations .................................................4
1.1Performance ..............................................................................4
1.2 Buttons ..................................................................................5
1.3 Accessories ............................................................................7
Chapter 2 Getting Start ...................................................................8
2.1 Installing & Changing Battery ...................................................8
2.2 Po er on & Po er off ..............................................................8
2.3 Charging the Battery .............................................................. 11
2.4 Sleep & Wakeup .................................................................... 12
2.5 Taskbar ................................................................................... 13
2.6 Desktop .................................................................................. 14
2.7 Resetting the Terminal .......................................................... 15
Chaper 3 Settings ................................................................. 16
3.1 Settings .................................................................................. 18
3.2 Po er ..................................................................................... 19
3.3 Pass ord ................................................................................ 20
3.4 Regional Settings ................................................................... 21
3.5 Date/Time .............................................................................. 23
3.6 O ner ............................................................................... 24
3.7 System.................................................................................... 26
3.8 Display .................................................................................... 28
3
3.9 K36 Hand-held Function use ............................................ 29
Chapter 4 Keyboard & Input mode .............................................. 33
4.1 Keyboard ................................................................................ 33
4.2 Input panel ............................................................................. 33
Chapter 5 Installing & Removing soft are .................................. 35
5.1 Directory ................................................................................ 35
5.2 Installing Microsoft ActiveSync .............................................. 36
5.3 Ho to install soft are .......................................................... 37
5.3.1 Preparation： .................................................................. 37
5.3.2 Install software in your terminal： ................................. 37
5.3.3 How to execute files： ................................................... 37
Appendix 1 Troubleshooting ....................................................... 38
Device&System problem ............................................................. 38
2、Communication problem ....................................................... 39
Appendix 3 Customer Service ...................................................... 40
Appendix 4 Others ....................................................................... 40
4
Chapter 1 Basic informations
1.1Performance
Item Description
OS Microsoft Windows CE.Net 6.0
CPU s3c2416 400 MHz Processor
Memory 256M Flash ROM, 64M DDR2
Display
QVGA 2.8 240 x320 resolution, Transflective, portrait mode
TFT High-reliability adjustable LED
function
IRDA METER
additional SYMBOL engine(1D)
additional RFID (125KHz、134.2KHz、13.56MHz)
WIFI、GPRS、GPS、BlueTooth
Backup SD card & FLASH
Develop
environment VS.NET 2008
Battery 2800mAh lithium-ion battery
IP & Drop test Test per IEC60529/IP54, 1.2 meter/6 times drop to concrete
Temperature Operatingtemperature:-20℃-50℃
Storage temperature:-25℃to 55℃
5
Communicate on
USB /Wifi/CDMA/GPRS/Bluetooth optional
Storage Micro SD card（16GB MAX）
Dimensions 156mm*71.5mm*26/32mm
Weight 285g
1.2 Buttons
Key Action
Power key.Press the key to turn the terminal on when
off.Pres
s the key to enter suspend/wakeup status.Press the
key for 3 seconds to turn the terminal off.
Combination function key
Combination function key
Left Scan button
Right Scan button
Direction key-Left
Direction key-Right
Direction key-Up
6
TAB Direction key-Down
Executes a selected item.
ENTER KEY
TAB as PC
Backspace key
Numeric
-1
Numeric
-2/Letter-ABC
Numeric
-3/Letter-DEF
Numeric
-4/Letter-GHI
Numeric
-5/Letter-JKL
Numeric
-6/Letter-MNO
Numeric
-7/Letter-PQRS
Numeric
-8/Letter-TUV
7
Numeric
-9WXYZ
Numeric
-0 and Space
Switch input method
1.3 Accessories
Item Quantity
Remark
Terminal 1pc
Stylus 1pc
USB cable 1pc
Allows USB connection from the terminal to a host
computer,allows charging of the te
rminal through
the cable.
Charger 1pc For charging the battery and set
Lithium-ion
battery
1pcs
8
Chapter 2 Getting Start
2.1 Installing & Changing Battery
1. Be sure that the Terminal is turned off;
2. Unlock the Battery Cover;
3. Remove the Battery Cover;
4. Insert battery in the battery compartment with the tie on the
battery;
5. Replace the battery cover by inserting the top first;
6. Lock the Battery Lock.
2.2 Power on & Power off
1. Power on
Insert battery in the battery compartment，Press the button，
then the splash screen displays（See Figure 2-1）， When the
9
initialization finish，then you can see the WinCE（See Figure 2-2）.
Figure 2-1 Figure 2-2
Please calibrate the screen when turning on the terminal for the
first time.
(1)Click the button on the desktop，Select
"Settings"->"Control Panel"。
(2)Select "Stylus"(See Figure2-3)，and double-click。
Figure 2-3
(3)Select“Calibration”，then click the “Recalibrate”button(See
Figure2-4)。
Indice
