Technica Specifications
Waterproof Camera
1.Dimension: 23mmx50mm.
2.Flexible pipe: 500mm
3.Camera casing:Stainless steel 304
4.Camera lens: Sapphire blue
5.Sensor dimension:1/4 inch
6.Senor pixel:PAL@720X576/NTSC: 720X480
7.Lens visible angle: 120 degrees
8.Camera adjustable angle: Arbitrary angle
9.Camera light source: 12 LEDs
10.Waterproofstandard: IP68
11.Working voltage: DC 12V,working current: 100mA
12.Rod Max length: 3.1m
13.Working temperature:-10℃-50℃
LCD Screen：
LCD dimension: 4.3-inch, 16：9
Resolution:480*320*RGB
Power supply:12V DC
3
Operation
1，Firstly, take product parts from the Aluminum-alloy
case, and assemble them according to instructions.
Connect signal cable, adjust the knobs to fix the
stretch rod at proper length for use
2，Turn on the battery, then the video searching system
works Adjust the camera angle according to your need
3，When operation finishes, screw the knobs
counter-clock wisely and stretch back 2 rods.
Disassemble the product inversely
Put parts back to case for future use.for prepare the
next using
4.After you are finished using the device in the first teles
copic adjustment deck cocked upward direction,the first
section telescopic rod recoverd Banxia deck wrench to
adjust ,and then same principle to section telescopic rod
recovered.Removing the order of the components in sito
aluminum boxes to prepare for the next convenient to
use.
Note: There will be blue LCD if the signal cable is not
plugged correctly.
12
