Shimadzu CBM-20A Manuale utente

223-00950C

Quick Guide for Connection of CBM-20A(lite) and SPD-M20A

This guide describes how to connect the CBM-20A(lite) and

the SPD-M20A to the network and make the settings to

enable control from PC.

Prepare LAN cable, a hub, and PC in order to make

communication setting for CBM-20A(lite) and SPD-M20A

that are at the state of shipment.

*Procedure

1) Setting IP address for PC

2) Changing browser setting for PC

3) Setting IP address and group name of the

CBM-20A(lite)

4) Setting IP address and master server of the

SPD-M20A.

5) Changing IP address of the PC when necessary

Make the settings with the following procedure.

■ PC settings

IP address setting . . .

Subnet mask setting . . .

■ Internet Explorer setting

Amount of disk space to use □done

Adding CBM-20A(lite) to local intranet zone □done

Adding SPD-M20A to local intranet zone □done

“Run ActiveX controls and plug-ins” setting □done

"Script ActiveX controls marked safe for scripting"

setting

□done

“Active scripting” setting □done

“Access data sources across domains” setting □done

"File download" setting □done

Bypassing proxy server □done (Only when using a proxy server)

“Display a notification about every script error” setting

□done

"Print background colors and images " setting □done

■ CBM-20A(lite)/ SPD-M20A settings

Items CBM-20A SPD-M20A

IP address setting . . . . . .

Subnet mask setting . . . . . .

System name setting

Group name setting

Master Name setting

Communication Mode setting □LCsolution □CLASS-VP

□

Interface setting □Ethernet □RS-232C

□Opt-Link(PAC)

Set time from PC clock □done

[With CBM-20Alite only] CBM LINK setting □done

1 Setting IP Address for PC

This section describes how to change the IP address of PC.

CBM-20A(lite) and SPD-M20A have the following IP

address and Subnet mask set at the time of shipment from

the factory.

Table 1 Initial value of the instrument and the IP address

IP address Subnet mask

CBM-20A(lite) 192.168.200.99 255.255.255.0

SPD-M20A 192.168.200.98 255.255.255.0

■Changing the IP address

１． Open Control Panel from Start.

２． From Control Panel, display the Property of Local

Area Connection Properties window with a series of

operation below:

- Click on Network and Internet Connections in

Control Panel.

- In the Network and Internet Connections window,

click on Network Connections.

- In the Network Connections window, right click

on the Local Area Connection to display the pop

up menu, and then click on Properties button.

３． In the Local Area Connection Properties dialog box,

select Internet Protocol (TCP/IP) and click on the

Properties button.

４． Set the IP address and Subnet mask.

If the factory setting of the CBM-20A(lite) and

SPD-M20A have not been changed, input the IP

address and the subnet mask for the PC as show

below.

Items Set Values

IP address 192.168.200.101

Subnet mask 255.255.255.0

Click on the OK button after settings are made.

You may be requested to reboot the PC. In that case,

follow the instruction and reboot your PC.

[Notice]

CBM-20A(lite)/SPD-M20A shipped from the factory have

IP addresses "192.168.200.99" and "192.168.200.98" in

factory settings. When

any PC in the existing LAN has one

of these IP addresses, collision of IP address occurs, which

prevents from configuring any parameters in

CBM-20A(lite)/SPD-M20A. In such a case, connect

CBM-20A(lite)/SPD-M20A with the PC in a closed

configuration (in isolation from the existing LAN), set

their IP addresses, then connect them to the existing LAN.

In addition, collision of IP address occurs when two or

more CBM-20A(lite)/SPD-M20As in factory settings are

connected simultaneously. In this case, configure

CBM-20A(lite)/SPD-M20A one by one without connecting

them to the LAN at once.

* The above explanation is given provided that the OS of your PC is Windows XP and Control Panel shows Category View.

* When you have changed CBM-20A(lite) and SPD-M20Asettings, if necessary, change the IP address and Subnet mask of PC to

confirm that connection can be made.

2 Setting Internet Explorer for PC

■ Setting Internet Explorer

Set the CBM-20A(lite) and SPD-M20A using the Internet

Explorer. Internet Explorer requires IE6 SP1. Also it is

required to change the IE settings including Amount of

disk space to use, Security, Advanced etc. Change the IE

settings from the Internet Option screen.

Start up IE and click on Tool in the menu followed by

Internet Option to display the Internet Option dialog box.

■ Setting of the Amount of disk space to use

1) Click on the Settings button of the Temporary

Internet files folder in the General tab to display

the setting dialog.

2) Input “100” in the disk capacity to use and click on

the OK button.

■ Security setting (1)

1) Select [ ] in the Security tab and click on the

Site button.

2) Click on the Advanced button.

3) Add URLs of CBM-20A(lite) and SPD-M20A.

Input “http://192.168.200.*” and press the Add

button. After input, click on the OK button to

confirm the set contents.

■ Security setting (2)

Click on the Custom Level button in the Security tab.

Set the following items from the setting list.

Items Setting description

Run ActiveX control and plug-ins “Enable”

Script ActiveX controls marked

safe for scripting

“Enable”

Active scripting “Enable”

Access data source across domains “Enable” or “Prompt”

File download “Enable”

You may be warned with a message saying “Are you sure

you want to change the security setting for this zone?”

Select Yes in that case.

■ Bypassing proxy server

Click on the LAN settings button in the Connections

tab. When using a proxy server in your LAN, configure

the following settings. If no proxy server is used, this

setting is unnecessary.

1) Check the “Bypass proxy server for local

addresses” check box.

2) Click the Advanced button and add the system

controller’ s URL(192.168.200.*) in “Exceptions”.

[Setting the disk capacity]

[Setting Security (1)]

[Security Setting (2)]

[Bypassing proxy server] [Advanced]

■ Advanced

1) Display the Advanced tab.

2) Browse to the checkbox “Display a notification

about every script error” and select this option.

3) Browse to the checkbox “Print background colors

and images” and select this option.

* Change the URL added in Security setting (1) so that new URL is included in the zone after setting IP of the SPD-M20A.

Delete old URL and add new URL.

3 Setting the CBM-20A(lite)

■ Setting IP address of CBM-20A(lite)

Connect to CBM-20A(lite) using Internet Explorer and

change the IP address.

1) Start IE and input the URL of CBM-20A(lite).

Input “http://192.168.200.99” when newly installed.

2) Click on System Name on the Status page.

3) Login the Group_Setting window with the

Administrator authority. When newly installed, input

User ID: Admin and Password: Admin.

Click on Group Settings button. after inputting User

Name and Password.

4) Set System Name and Group Name.

5) Set IP address and Subnet Mask.

 Clicking on the Advanced Settings button displays

Advance Settings dialog box. The default gateway can

be set.

■Setting Communication Mode and interface

When shipped out from the factory, the Communication

Mode is set to LCsolution and Interface is set to Ethernet.

If used in the setting other than this, change the settings

with the procedure below.

1) Connect with Internet Explorer, press System Name in

the Status page of CBM-20A to login.

2) Click on System Controller.

3) In the Data Processing Setting System, set

Communication Mode and Interface.

The following items can be selected.

Communication Mode : LCsolution, CLASS-VP,

C-R8A etc.

Interface: Ethernet, RS-232C, Opt-Link(PAC)

Setting of the IP address, communication mode, and

interface become effective from the next time when

CMB-20A(lite) starts up.

In addition to the above settings, perform the following

operation.

 Set time from PC clock

Click on the Set time from PC clock button in the

System Controller tab to set the time.

 Checking the case to use CBM-20Alite

In order to have CBM-20Alite link to the instrument

to which CBM-20Alite is installed, it is necessary to

set CBM LINK at LC to INT setting at system window

on LC side. Address (5) will be automatically set as

the link address.

* If the following units are connected to CBM-20A(lite), it is possible to set IP address and Subnet mask directly from each unit.

For details, see “3.1.2 Setting IP addresses” in Instruction Manual (Brief Manual) for CBM-20A/20Alite.

Pumps: LC-20A series pumps (LC-20AD, LC-20AT, LC-20AB),Auto sampler: SIL-20A(C), and Detector: SPD-20A/20AV

4Setting the SPD-M20A

■Setting the IP address of SPD-M20A

Connect to SPD-M20A using Internet Explorer to change

the IP address.

1) Open the setting screen from IE.

Input “http://192.168.200.98” when newly installed.

2) Log in as Administrator.

Input user ID and password, and press down the

administrator and Password: pdaadmin.

3) Change the IP address and Subnet mask

Click on the Edit button of the Administrator Setting

window.

Input IP address and Subnet mask from the Network

Setup window.

After input, click on the OK button.

4) Restart SPD-M20A.

The changed IP address becomes valid from the next

time SPD-M20A starts up.

■ Setting Group name and Master name

When starting analysis synchronously with the

CBM-20A(lite), change the Group Name and Master

Name.

Perform setting from the Administrator Setting window.

- Set the same Group Name as CBM.

- Set System name of CBM to the Master Name.

(Setting Example)

Setting of

CBM

Setting of

SPD-M20A

Group Name HPLC1 HPLC1

System Name CBM1 M20A1

Master Name CBM1

Altri manuali per CBM-20A

Questo manuale è adatto per i seguenti modelli

Altri manuali Shimadzu Controllori

Shimadzu

Shimadzu OMRON CJ Series Manuale di istruzioni

Shimadzu

Shimadzu CBM-20A Manuale utente

Shimadzu

Shimadzu CBM-40 CL Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente