Shindaiwa RS600 Manuale utente
X7507840102
© 7/21 ECHO Incorporated
Operator’s
Manual
RS600
Broadcast
Spreader
INTRODUCTION RS600
2 X7507840102
© 7/21 ECHO Incorporated
INTRODUCTION
Specifications, descriptions and illustrative material in this literature are as
accurate as known at the time of publication, but are subject to change
without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
Read and understand all provided literature.
Literature contains specifications and
information for safety, operation,
maintenance, storage, and assembly
specific to this product. Scan QR codes for
more information.
For additional literature, including safety manuals where applicable, or
questions regarding terms used in this manual, visit:
https://www.echo-usa.com/manuals
OR
https://www.shindaiwa-usa.com/manuals
SERVICING INFORMATION
Parts and Serial Number
Genuine SHINDAIWA Parts and
Assemblies for your SHINDAIWA
products are available only from an
Authorized SHINDAIWA Dealer.
When you do need to buy parts
always have the Model Number
and Serial Number of the unit with
you. For future reference, write
them in the space provided below.
Model No. _____________________ Serial No. _____________________
RS600 SERVICING INFORMATION
X7507840102 3
© 7/21 ECHO Incorporated
Service
Service of this product during the warranty period must be performed by an
Authorized SHINDAIWA Service Dealer. For the name and address of the
Authorized SHINDAIWA Service Dealer nearest you, ask your retailer or
call: 1-877-986-7783. Dealer information is also available on
WWW.SHINDAIWA-USA.COM. When presenting your unit for Warranty
service/repairs, proof of purchase is required.
Consumer Product Support
If you require assistance or have questions concerning the application,
operation or maintenance of this product you may call the SHINDAIWA
Consumer Product Support Department at 1-877-986-7783 from 8:00 am to
5:00 pm (Central Standard Time) Monday through Friday. Before calling,
please know the model and serial number of your unit.
Product Registration
To ensure trouble free warranty coverage it is important that you register
your SHINDAIWA equipment on-line at WWW.SHINDAIWA-USA.COM or
by filling out the product registration sheet included in this manual.
Registering your product confirms your warranty coverage and provides a
direct link between you and ECHO if we find it necessary to contact you.
Additional Literature
In addition to finding information online, information is available from your
Authorized Shindaiwa Service Dealer, or by contacting ECHO Incorporated,
400 Oakwood Road, Lake Zurich, IL 60047, 1-800-432-ECHO (3246).
SAFETY RS600
4 X7507840102
© 7/21 ECHO Incorporated
SAFETY
Safety Information
Carefully read these instructions before use. Improper use or
failure to follow instructions can result in product failure or
injuries. For safe use of this product you must read and follow
all instructions before using.
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
◆Do not allow anyone to operate the broadcast spreader
without proper instructions.
◆Do not permit children to operate the broadcast spreader.
◆Wear all personal protective equipment recommended by
chemical manufacturer.
◆Read and follow the chemical label instructions and
warnings for handling and applying the chemicals you plan
to spread – application settings provided are only a
guideline.
RS600 DESCRIPTION
X7507840102 5
© 7/21 ECHO Incorporated
DESCRIPTION
Locate the safety decal(s) on your unit. Make sure the decal(s) is legible
and that you understand and follow the instructions on it. If a decal cannot
be read, a new one can be ordered from your dealer. The safety decal is for
example only. Your label may appear slightly different.
1 Top Handle Bracket
2 Bottom Handle Bracket
3 Actuator Handle
4 Hopper
5 Handle Assembly Wing Nut
6 Side Deflector
7 Wheels
8 Gate Adjuster
9 Gear Case
5
7
8
4
6
3
9
2
1
CONTENTS RS600
6 X7507840102
© 7/21 ECHO Incorporated
CONTENTS
The product you purchased has been partially factory pre-assembled for
your convenience. Due to packaging restrictions, some assembly may be
necessary.
After opening the carton, check for damage. Immediately notify your retailer
or Dealer of damaged or missing parts. Use the contents list to check for
missing parts.
ASSEMBLY
Install Handle
Brackets
1. Align holes in top handle
bracket (A) with holes in
bottom handle bracket
(B).
1 Broadcast Spreader Asembly
2 Carriage Bolts
2WingNuts
1 Quick Start Guide
A
B
RS600 ASSEMBLY
X7507840102 7
© 7/21 ECHO Incorporated
2. Secure handle brackets
with wing nuts (C) and
carriage bolts (D) on each
side.
Note: Attach each side
loosely before
tightening brackets
securely.
Assure control cable is
routed behind handle
brackets.
Check Tire Pressure
Tires should be inflated to 15 psi. Assure tire pressure does not
exceed 30 psi.
C
D
OPERATION RS600
8 X7507840102
© 7/21 ECHO Incorporated
OPERATION
Application Instructions
TIP HAZARD. Unit can tip on uneven ground. Always fill hopper
on flat ground, and keep bystanders away. Otherwise personal
injury can result.
1. Fill Hopper
Release actuator handle (A) to
close gate. Fill hopper.
Note: Fill hopper in an area that
won’t be damaged by
spilled product.
2. Set Gate Adjustment
Push gate adjuster (B) down and
move to best application setting
(see chart below). Pull adjuster
upward to lock in place.
Note: Gate adjustment settings
should only be used as a
general guideline for
application. Refer to
instructions on material
you are spreading for most accurate application setting
requirements.
3. Application
A. Lower edge guard (C) and
make perimeter pass to protect
non-lawn areas. Pull actuator
handle to open gate while
spreading.
B. Raise edge guard. Make
parallel internal passes to ensure
even coverage.
A
B
C
C
RS600 MAINTENANCE
X7507840102 9
© 7/21 ECHO Incorporated
MAINTENANCE
Clean Spreader
Avoid spraying gear case directly, and do not use a pressure washer
on spreader.
Setting
Ajuste
Réglage
5
5
5
5.5
5.5
5.5
6
6
6
Setting comparison chart / Cuadro comparativo / Régler selon la charte de comparaison
Setting by granular size / Ajuste por tamaño granular / Régler selon la taille des granules
Pesticide
Pesticidas
Weed Control
Control de hierba
Contrôle des mauvais
herbes
Fertilizer
Fertilizante
Fertilisation
Overseeding
Resiembra
Sursemer
New lawn
Nuevo césped
Pelouses neuves
2 - 2.5 3 - 3.5 4 - 5.5 9 - 156 - 8
Sample Spread Pattern
Muestra del patrón de disribución
Modèle d’épandage type
SHUT OFF HERE
Apague aquí
Arrêt ici
SHUT OFF HERE
Apague aquí
Arrêt ici
START
Inicio
Mise en
marche
RESTART
Reinicie
Remise en
marche
RESTART
Reinicie
Remise en
marche
RESTART
Reinicie
Remise en
marche
RESTART
Reinicie
Remise en
marche
SHUT OFF HERE
Apague aquí
Arrêt ici
SHUT OFF HERE
Apague aquí
Arrêt ici
MAINTENANCE RS600
10 X7507840102
© 7/21 ECHO Incorporated
1. Wash spreader with a
garden hose after each use.
Check Tire Pressure
Tires should be inflated to 15 psi. Assure tire pressure does not
exceed 30 psi.
Replacing Control
Cable
1. Remove Shield (A).
2. Turn gate (B) clockwise to
relieve tension on cable.
C
A
B
C
C
Altri manuali per RS600
1
Indice
Altri manuali Shindaiwa Spargitore
Shindaiwa
Shindaiwa RS60 Manuale di istruzioni
Shindaiwa
Shindaiwa RS60 Manuale utente
Shindaiwa
Shindaiwa HomePro 76RS Manuale utente
Shindaiwa
Shindaiwa RS41 Manuale di istruzioni
Shindaiwa
Shindaiwa HomePro 41RS Broadcast Manuale utente
Shindaiwa
Shindaiwa 75RS Manuale del proprietario
Shindaiwa
Shindaiwa RS76 Manuale utente
Shindaiwa
Shindaiwa RS76 Manuale utente
Shindaiwa
Shindaiwa RS600 Manuale utente
Shindaiwa
Shindaiwa RS76 Manuale utente
Manuali Spargitore popolari di altre marche
Fisher
Fisher POLY-CASTER 78601 Manuale utente
TurfEx
TurfEx RS7200 Manuale del proprietario
Ferris
Ferris Pathfinder Series Manuale utente
Fayat Group
Fayat Group DYNAPAC S100 Guida alla risoluzione dei problemi
Art's-Way Manufacturing
Art's-Way Manufacturing X700 Manuale di installazione e funzionamento
EASTMAN
EASTMAN CR 500 Manuale utente
