Shindaiwa M262 Manuale utente

X7712093501

ENGLISH

Operator’s Manual

Specifications, descriptions and illustrative material in this literature are as

accurate as known at the time of publication, but are subject to change without

notice. Illustrations may include optional equipment and accessories, and may

not include all standard equipment.

66003

Multi-Tool Articulating

Hedge Trimmer

Attachment

FOR MODELS: M262, M235

Users of this equipment risk injury to themselves and

others if the unit is used improperly and/or safety pre-

cautions are not followed. ECHO provides an opera-

tor’s manual. It must be read and understood for

proper and safe operation. Failure to do so could result in seri-

ous injury.

TABLE OF CONTENTS 66003

2 X7712093501

TABLE OF CONTENTS

Introduction ................................................................................................. 3

The Operator’s Manual ........................................................................ 3

Servicing Information .................................................................................. 3

Parts/Serial Number ............................................................................ 3

Service................................................................................................. 3

Consumer Product Support ................................................................. 4

Product Registration ............................................................................ 4

Additional or Replacement Manuals .................................................... 4

Safety .......................................................................................................... 4

Manual Safety Symbols and Important Information ............................. 4

International Symbols .......................................................................... 5

Personal Condition and Safety Equipment .......................................... 6

Equipment.......................................................................................... 11

Description ................................................................................................ 12

Contents.................................................................................................... 13

Assembly................................................................................................... 13

Power Head Shaft to Lower Shaft Assembly ..................................... 13

Operation .................................................................................................. 14

Hedge Trimming................................................................................. 15

Adjusting Cutting Angle ..................................................................... 15

Rotate Cutter Assembly ..................................................................... 16

Maintenance ............................................................................................. 17

Skill Levels ......................................................................................... 18

Maintenance Intervals........................................................................ 18

Lubrication ......................................................................................... 18

Blades................................................................................................ 20

Storage...................................................................................................... 22

Storage Hook Installation................................................................... 22

Specifications............................................................................................ 23

Product Registration.................................................................................. 24

Notes......................................................................................................... 26

66003 INTRODUCTION

X7712093501 3

ENGLISH

INTRODUCTION

Welcome to the SHINDAIWA family. This SHINDAIWA product was

designed and manufactured to provide long life and on-the-job dependabil-

ity. Read and understand this manual. You will find it easy to use and full of

helpful operating tips and SAFETY messages.

The Operator’s Manual

Keep it in a safe place for future reference. Contains specifications and

information for safety, operation, maintenance, storage and assembly spe-

cific to this product.

SERVICING INFORMATION

Parts/Serial Number

Genuine SHINDAIWA Parts and

Assemblies for your SHINDAIWA

products are available only from an

Authorized SHINDAIWA Dealer.

When you do need to buy parts

always have the Model Number and

Serial Number of the unit with you.

You can find these numbers on the

engine housing. For future refer-

ence, write them in the space pro-

vided below.

Model No. _________________

Serial No. _________________

Service

Service of this product during the

warranty period must be performed by an Authorized SHINDAIWA Service

Dealer. For the name and address of the Authorized SHINDAIWA Service

Dealer nearest you, ask your retailer or call: 1-877-986-7783. Dealer infor-

mation is also available on WWW.SHINDAIWA-USA.COM. When present-

ing your unit for Warranty service/repairs, proof of purchase is required.

SAFETY 66003

4 X7712093501

Consumer Product Support

If you require assistance or have questions concerning the application,

operation or maintenance of this product you may call the SHINDAIWA Con-

sumer Product Support Department at 1-877-986-7783 from 8:00 am to

5:00 pm (Central Standard Time) Monday through Friday. Before calling,

please know the model and serial number of your unit.

Product Registration

To ensure trouble free warranty coverage it is important that you register

your SHINDAIWA equipment on-line at WWW.SHINDAIWA-USA.COM or by

filling out the product registration sheet included in this manual. Registering

your product confirms your warranty coverage and provides a direct link

between you and ECHO if we find it necessary to contact you.

Additional or Replacement Manuals

Replacement Operator and Parts Catalogs are available from your SHIN-

DAIWA dealer or at WWW.SHINDAIWA-USA.COM or by contacting the

Consumer Product Support Department (1-877-986-7783). Always check

WWW.SHINDAIWA-USA.COM for updated information.

SAFETY

Manual Safety Symbols and Important Information

Throughout this manual and on the product itself, you will find safety alerts

and helpful, informational messages preceded by symbols or key words.

The following is an explanation of those symbols and key words and what

they mean to you.

The safety alert symbol accompanied by the word “DANGER”

calls attention to an act or condition which WILL lead to serious

personal injury or death if not avoided.

The safety alert symbol accompanied by the word “WARNING”

calls attention to an act or condition which CAN lead to serious

personal injury or death if not avoided.

66003 SAFETY

X7712093501 5

ENGLISH

The safety alert symbol accompanied by the word “CAUTION”

calls attention to an act or condition which may lead to minor or

moderate personal injury if not avoided.

The enclosed message provides information necessary for the pro-

tection of the unit.

Note: This enclosed message provides tips for use, care and main-

tenance of the unit.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action shown is prohibited.

Ignoring these prohibitions can result in serious or fatal injury.

International Symbols

Symbol Description Symbol Description

Warning, See

Operator’s Manual Safety / Alert

Wear Eye, Ear and

Head Protection Finger Severing

Wear Hand and Foot

Protection

Rotating Cutting

Attachment

Wear Face Shield Wear Slip Resistant

Footwear

Keep Feet Away From

Blade

Do not operate closer

than 15 m (50 ft.) from

electrical hazards.

Keep bystanders at

least 15 m (50 ft.)

away.

SAFETY 66003

6 X7712093501

Personal Condition and Safety Equipment

Users of this product risk injury to themselves and others if the

unit is used improperly and/or safety precautions are not fol-

lowed. Proper clothing and safety gear must be worn when op-

erating unit.

Physical Condition

Your judgment and physical dexterity may not be good:

• If you are tired or sick

• If you are taking medication

• If you have taken alcohol or drugs

Operate unit only if you are physically and mentally well.

DO NOT USE

BLADES - Line Head

Only

Thrown Objects

Plan retreat path from

falling objects. Hot Surface

AVOID KICKOUT

Keep Bystanders At Least

15 m (50 ft.) Away

Beware Thrown Objects

Wear Eye Protection

Keep Bystanders and Helpers

Away 15 m (50 ft.)

Symbol Description Symbol Description

66003 SAFETY

X7712093501 7

ENGLISH

Eye Protection

◆Eye protection that meets ANSI Z87.1 or CE requirements

must be worn whenever you operate the unit.

◆For additional safety, a full-face shield may be worn over

safety glasses or goggles to provide protection from sharp

branches or flying debris.

Hand Protection

Wear sturdy, no-slip, rubber work gloves to improve your grip on the han-

dles. Gloves also provide protection against cuts and scratches, cold envi-

ronments, and reduce the transmission of machine vibration to your hands.

Hearing/Ear Protection

ECHO recommends wearing hearing protection whenever unit is used.

Breathing Protection

Operators who are sensitive to dust or other common airborne allergens

may need to wear a dust mask to prevent inhaling these materials while

operating unit. Dust masks can provide protection against dust, plant debris,

and other plant matter such as pollen. Make sure the mask does not impair

your vision, and replace the mask as needed to prevent air restrictions.

Proper Clothing

Wear snug-fitting, durable clothing:

• Pants should have long legs, shirts should have long sleeves.

• DO NOT WEAR SHORTS.

• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or

hanging items that could become entangled in moving parts or surround-

ing growth.

• Keep clothing buttoned or zipped, and keep shirt tails tucked in.

Wear sturdy work shoes with nonskid rubber soles:

• DO NOT WEAR OPEN TOED SHOES.

• DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain hair with cap or net.

SAFETY 66003

8 X7712093501

Heavy protective clothing can increase operator fatigue, which may lead to

heat stroke. Schedule heavy work for early morning or late afternoon hours

when temperatures are cooler.

The components of this machine generate an electromagnetic

field during operation, which may interfere with some pacemak-

ers. To reduce the risk of serious or fatal injury, persons with

pacemakers should consult with their physician and the pace-

maker manufacturer before operating this machine. In the ab-

sence of such information, ECHO does not recommend the use

of this machine by anyone who has a pacemaker.

Extended Operation / Extreme Conditions

Prolonged exposure to cold and/or vibration may result in inju-

ry. Read and follow all safety and operation instructions to min-

imize risk of injury. Failure to follow instructions may result in

painful wrist/hand/arm injuries.

It is believed that a condition called Raynaud’s Phenomenon, which affects

the fingers of certain individuals, may be brought about by exposure to

vibration and cold. Exposure to vibration and cold may cause tingling and

burning sensations, followed by loss of color and numbness in the fingers.

The following precautions are strongly recommended, because the mini-

mum exposure, which might trigger the ailment, is unknown.

• Keep your body warm, especially

the head, neck, feet, ankles,

hands, and wrists.

• Maintain good blood circulation by

performing vigorous arm exer-

cises during frequent work

breaks, and also by not smoking.

• Limit the hours of operation. Try to

fill each day with jobs where oper-

ating the unit or other hand-held

power equipment is not required.

• If you experience discomfort, red-

ness, and swelling of the fingers followed by whitening and loss of feeling,

consult your physician before further exposing yourself to cold and vibra-

tion.

66003 SAFETY

X7712093501 9

ENGLISH

Repetitive Stress Injuries

(RSI)

It is believed that overusing the

muscles and tendons of the fingers,

hands, arms, and shoulders may

cause soreness, swelling, numb-

ness, weakness, and extreme pain

in those areas. Certain repetitive

hand activities may put you at a high

risk for developing a Repetitive

Stress Injury (RSI). An extreme RSI

condition is Carpal Tunnel Syn-

drome (CTS), which could occur

when your wrist swells and

squeezes a vital nerve that runs

through the area. Some believe that

prolonged exposure to vibration may contribute to CTS. CTS can cause

severe pain for months or even years.

To reduce the risk of RSI/CTS, do the following:

• Avoid using your wrist in a bent, extended, or twisted position. Instead try

to maintain a straight wrist position. Also, when grasping, use your whole

hand, not just the thumb and index finger.

• Take periodic breaks to minimize repetition and rest your hands.

• Reduce the speed and force with which you do the repetitive movement.

• Do exercises to strengthen the hand and arm muscles.

• Immediately stop using all power equipment and consult a doctor if you

feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The

sooner RSI/CTS is diagnosed, the more likely permanent nerve and mus-

cle damage can be prevented.

All over head electrical conductors and communications wires

can have electricity flow with high voltages. This unit is not in-

sulated against electrical current. Never touch wires directly or

indirectly, otherwise serious injury or death may result.

Do not operate this product indoors or in inadequately ventilat-

ed areas. Engine exhaust contains poisonous emissions and

can cause serious injury or death.

SAFETY 66003

10 X7712093501

Read the Manuals

• Provide all users of this equipment with the Operator’s Manual and Safety

Manual for instructions on Safe Operation.

Clear the Work Area

• Spectators and fellow workers must be warned, and children and animals

prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Keep a Firm Grip

• Always hold throttle handle and support handle with thumbs and fingers

tightly encircling the handles.

Keep a Solid Stance

• Maintain footing and balance at all times. Do not stand on slippery,

uneven or unstable surfaces. Do not work in odd positions or on ladders.

Do not over reach.

Cutting Angle Adjustments

• Only adjust cutting blade angle

with unit flat on the ground, with

the engine stop switch in the

“STOP” position. Never adjust

cutting angle with unit standing

upright.

Avoid Contact With Gear Box Assembly During Use

• Gear box assembly becomes hot during use. Avoid

contact with gear box assembly when using unit or

making cutting angle adjustments.

Avoid Hot Surfaces

• Keep exhaust area clear of flammable debris. Avoid contact during and

immediately after operation.

Altri manuali per M262

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Shindaiwa Tagliabordi

Shindaiwa

Shindaiwa 89309 Manuale del proprietario

Shindaiwa

Shindaiwa BCK-10A Manuale utente

Shindaiwa

Shindaiwa T303TS Manuale utente

Shindaiwa

Shindaiwa X7502824900 Manuale del proprietario

Shindaiwa

Shindaiwa T-20 Auto Manuale utente

Shindaiwa

Shindaiwa 81646 Manuale del proprietario

Shindaiwa

Shindaiwa C242 Manuale del proprietario

Shindaiwa

Shindaiwa AHS242es Manuale del proprietario

Shindaiwa

Shindaiwa T302TS Manuale utente

Shindaiwa

Shindaiwa F220 Manuale del proprietario

Shindaiwa

Shindaiwa DH2510/EVC Manuale del proprietario

Shindaiwa

Shindaiwa 65003 Manuale del proprietario

Shindaiwa

Shindaiwa AH243S Manuale utente

Shindaiwa

Shindaiwa AHS243S-LW Manuale utente

Shindaiwa

Shindaiwa 65001 Manuale utente

Shindaiwa

Shindaiwa C262 Manuale utente

Shindaiwa

Shindaiwa 82053 Manuale del proprietario

Shindaiwa

Shindaiwa HomePro 22DH series Manuale utente

Shindaiwa

Shindaiwa T3000 Manuale utente

Shindaiwa

Shindaiwa BP420S Manuale utente

Shindaiwa

Shindaiwa 80974 Manuale del proprietario

Shindaiwa

Shindaiwa B450 Manuale del proprietario

Shindaiwa

Shindaiwa T235 Manuale utente

Shindaiwa

Shindaiwa PowerBroom PS344 Manuale del proprietario

Manuali Tagliabordi popolari di altre marche

MTD

MTD HT 51 E Manuale utente

McCulloch

McCulloch T22 LS Manuale utente

COCKRAFT

COCKRAFT PRO HL36-S Manuale utente

Grizzly

Grizzly CT 1800 Li Manuale utente

Peco

Peco Z Trimmer ZT-3000 Manuale utente

Solo

Solo 116 Manuale utente

Stiga

Stiga ST 1200 Manuale utente

Echo

Echo GT-225 - 10-09 Manuale utente

RedMax

RedMax BT17 Manuale utente

GreenWorks

GreenWorks STA806 Manuale utente

Parkside

Parkside PHSL 900 A3 Manuale utente

Gardeo

Gardeo PRO GPTHT2560 Manuale utente

Park

Park DT-810870 Manuale utente

Worx

Worx WG209 Manuale utente

Gardenline

Gardenline 43671/HTKS26 Manuale utente

Makita

Makita 3710 Manuale utente

Champion

Champion 100683 Manuale utente

Stihl

Stihl FS 311 Manuale utente