Shinerich SRPH32 Manuale utente

Item NO.:SRPH32

Model NO.:08395002/11875000/

11875003/11875019

Patio Heater

Operator's manual, p.1

Radiateur de terrasse

Guide de l'utilisateur, p.13

Customer Service / Service à la clientèle : 1-866-814-0585

Our Customer service staff is available to help you. For any problem with your purchase, or to receive further

Keep this manual and the original sales invoice in a safe, dry place for future reference.

Notre personnel du service à la clientèle est disponible pour vous aider. En cas de problème avec votre achat, ou pour

obtenir plus d’informations à propos de ce produit, veuillez composer notre numéro sans frais.

Conservez ce guide avec la facture d’origine dans un endroit sûr et sec pour référence future.

information about this product, please call our toll-free number.

SAVE THIS MANUAL

CONSERVEZ CE GUIDE

Contents

General Safety Information....................................... 1

snoitcurtsnIylbmessA

Components & Hardware.......................................

.............................................

Additional Requirements ........................................ 4

s................................................. 5secorPnoitallatsnI

Leak Check............................................................. 7

Safety Check.......................................................... 8

Operation................................................................

................................................

Lighting Instructions................................................ 9

10tsilkcehCnoitarepO

Troubleshooting...................................................... 11

Maintenance........................................................... 11

Storage...................................................................

Service.................................................................... 12

Limited Warranty .................................................... 12

General Safety Information

This manual contains important information about the

assembly, operation and maintenance of this patio heater.

General safety information is presented in these first few

pages and is also located throughout the manual.

Keep this manual for future reference and to educate

new users of this product. This manual should be read in

conjunction with the labeling on the product.

Safety precautions are essential when any mechanical

or propane fueled equipment is involved. These

precautions are necessary when using, storing, and

servicing this appliance. Using this equipment with the

respect and caution demanded will reduce the possibilities

of personal injury or property damage.

The following symbols shown below are used extensively

throughout this manual. Always follow these precautions,

as they are essential when using any mechanical or

fueled equipment.

DANGER

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING

WARNING indicates an imminently hazardous situation

which, if not avoided, could result in death or serious injury.

DANGER

WARNING

CAUTION

CAUTION indicates an imminently hazardous situation which,

if not avoided, may result in minor or moderate personal injury,

or property damage.

WARNING: For Outdoor Use Only

WARNING

DANGER

Failure to comply with the precautions and instructions

provided with this heater can result in death, serious bodily injury

and property loss or damage from hazards of fire,explosion,

burn, asphyxiation, and /or carbon monoxide poisoning.

Only persons who can understand and follow the instructions

should use or service this heater.

Improper installation, adjustment, alteration, service or maintenance

can cause property damage, injury or death. Read the installation,

operation and maintenance instructions thoroughly before installing

or servicing this equipment.

DANGER CARBON MONOXIDE HAZARD

This appliance can produce carbon

monoxide which has no odour.

Using it in an enclosed space can kill you.

Never use this appliance in an enclosed

space such as a camper, tent or home.

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

3. If odour continues, keep away from the appliance and

immediately call your gas supplier or fire department.

Do not store or use gasoline or other flammable

vapours and liquids in the vicinity of this or any

other appliance.

An LP-cylinder not connected for use shall not be

stored in the vicinity of this or any other appliance.

DANGER

paper or cardboard,

at a safe distance away from the heater

as recommended by the instructions.

the combustion chamber.

volatile or airborne combustibles, or products such as

gasoline, solvents, paint thinner, dust particles or unknown

chemicals.

ignition. Keep heater area clear and free from combustible

materials, gasoline, paint thinner, cleaning solvents and

other flammable vapours and liquids. Do not use heater in

areas with high dust content. Minimum heater clearances

from combustible materials: 24” (61 cm) from the sides &

36” (91 cm) from the top.

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. If odour continues, immediately call your gas

supplier.

WARNING

We cannot foresee every use that could be made of our

heaters.

Check with your local fire safety authority if you have

questions about heater use.

Other standards govern the use of fuel gases and heat

producing products for specific uses. Your local authorities

can advise you about these.

In Canada, installation must conform to local codes.

If no local codes exist, follow the current National

standards of CANADA CAN/CGA-B 149.2.

DANGER

appliances produce carbon monoxide (CO) during the

combustion process. This product is designed to produce

extremely minute, non-hazardous amounts of CO if used

and maintained in accordance with all warnings and

instructions. Do not block air flow into or out of the heater.

symptoms, watery eyes, headaches, dizziness, fatigue and

possibly death. You can't see it and you can't smell it. It's

an invisible killer. If these symptoms are present during

operation of this product get fresh air immediately!

nly.

areas.

unventilated or enclosed areas to avoid endangering

your life.

CAUTION

propane cylinder valve outlet is clean.

abrasion or wear.

using soapy water. Never use an open flame during leak testing.

use with any device.

WARNING

invisible, odourless, and flammable. An odorant is normally

added to help detect leaks and can be described as a

“rotten egg” smell. The odorant can fade over time so

leaking gas is not always detectable by smell alone.

sink to the lowest level possible. It can ignite by ignition

sources including matches, lighters, sparks or open flames

of any kind many feet away from the original leak. Use only

propane gas set up for vapour withdrawal.

local ordinances and codes or with ANS /NFPA 58. Turn off

propane when not in use.

DANGER

lights, direct sunlight, other ignition sources or where

temperatures exceed 120ºF (49°C).

in low places. If you smell gas, leave the area immediately.

lighted, near flame, pilot lights, other ignition sources or

while heater is hot to touch.

flammables too close to the burner. Keep flammables at

least 24” (61 cm) from sides & 36” (91 cm) from top.

Keep gasoline and other flammable liquids and vapours well

away from heater.

well ventilated space. Never store propane cylinder in an

enclosed area (house, garage, etc.). If heater is to be

stored indoors, disconnect the propane cylinder for outdoor

storage.

Assembly Instructions

Components

.Remove all components from package.

Part Description

M6 Nut

BB 6mm Washer

M6 x 10 Screw

M6 x 20 Bolt

M6 x 14 Bolt

M5 x 12 Flat Bolt

6mm Spring Washer

PictureQuantity

Additional Requirements

The above items are not included, but are necessary for

the proper assembly of your heater. Do NOT attempt to

assemble without proper tools.

Note: You must follow all steps in order to properly assemble

heater.

WARNING

California Proposition 65

Combustion by-products generated when using

this product contain chemicals known to the state

of California to cause many serious diseases

such as cancer.

TOOLS AND PARTS

Description

Quantity

Part

Center Reflector Cap

Reflector Shields

Burn Head

Upper Pole

Lower Pole

Gas Hose and Regulator

(preassembled)

Decorative Cap

Base

Cylinder Locking Bar

Wheel

TOOLS REQUIRED (Not included):

Adjustable open

end wrench

Phillips Screwdriver

Part DescriptionPicture Quantity

Step 1

6MM Washer

M6x20 Bolt

6MM Spring

Washer

BB FF

Step 3

Step 5

Step 6

Part DescriptionPicture Quantity

FF 4

M6x20 Bolt

Part DescriptionPicture Quantity

DD 4

M6 x 14 Bolt

Part DescriptionPicture Quantity

EE 6

M5x12 Flat Bolt

Part DescriptionPicture Quantity

M6x10 Screw

6MM Washer

M6 Nut

Part DescriptionPicture Quantity

M6x10 Screw

6MM washer

Step 2

Step 4

FF A

The pressure regulator and hose assembly supplied with the

appliance must be used.

The installation must conform with local codes, or in the absence

of local codes,with National Fuel Gas Code, ANS Z223.1/NFPA54,

Natural Gas and Propane Installation Code, CSA B149.1, or Propane

Storage and Handling Code, B149.2.

A dented, rusted or damaged propane cylinder may be hazardous

and should be checked by your cylinder supplier. Never use a

propane cylinder with a damaged valve connection.

The propane cylinder must be constructed and marked in

accordance with the specifications for LP gas cylinders of the

U.S. Department of Transportation (DOT).

or the Standard for Cylinders, Spheres and Tubes for

Transportation of Dangerous Goods and Commission,

CAN/CSA-B339.

Never connect an unregulated propane cylinder to the heater.

Open the door of cylinder housing.

Attach regulator to cylinder.

Complete attachment.

Install cylinder.

A minimum permissible gas supply pressure of 11" W.C.

is required for adjustment purposes.

A minimum supply pressure of

5 PSI

is required for

propane input adjustment.

Storage of an appliance indoors is permissible only

if the cylinder is disconnected and removed from the

appliance. A cylinder must be stored outdoors in a

well-ventilated area out of the reach of children. A

disconnected cylinder must have dust caps tightly

installed and must not be stored in a building, garage

or any other enclosed area.

You must provide propane gas and propane cylinder.

Use a standard 20 lb. propane

cylinder in good condition only.

Use this heater only with a

propane vapour withdrawal

supply system.See

Chapter 5 of the Standard

for Storage and Handling

of Liquefied Petroleum

Gas, ANSI/NFPA 58.Your

local library or fire

department should have

this book.

Standard 20 lb. tank

The propane cylinder must have a connection device compatible with

the connection for the appliance.

The propane cylinder must have a listed overfilling prevention device.

The cylinder used must include a collar to protect the cylinder valve.

(a) Do not store a spare LP-gas cylinder under or near this appliance;

(b) Never fill the cylinder beyond 80 percent full;

cylinder is not in use. Only install the type of dust cap on the

cylinder valve that provided with the cylinder valve. Other type of

caps or plugs may result in leakage of propane.

Tighten

Step 7

Step 8

Step 9

Tighten

Fill at least 23 lb

sand into the hole.

gas hose and regulator

Leak Check

WARNING

tested and do not leak.

Make 2-3 oz. of leak check solution (one part liquid

dishwashing detergent and three parts water).

Apply several drops of solution where hose attaches

to regulator.

Apply several drops of solution where regulator

connects to cylinder.

Make sure all patio heater & light valves are OFF.

Turn cylinder valve ON.

If bubbles appear at any connection, there is a leak.

Turn cylinder valve OFF.

If leak is at hose/ regulator connection: tighten

connection and perform another leak test. If bubbles

continue appearing, please call Customer service.

If leak is at regulator/ cylinder valve connection:

disconnect, reconnect, and perform another leak

check. If you continue to see bubbles after several

attempts, cylinder valve is defective; please call

If NO bubbles appear at any connection, the

connections are secure.

.Turn Cylinder Valve OFF.

NOTE: Whenever gas connections are loosened or

removed, you must perform a complete leak test.

.Complete installation.

Operation

DANGER

unventilated or enclosed areas. This heater consumes air

(oxygen). Do not use in unventilated or enclosed areas to

avoid endangering your life.

Caution: Do not attempt to operate until you have read

& understand all General Safety Information in this

manual and all assembly is complete & leak checks

have been performed.

Hose

connection

Access Hose

Regulator

Connection

Cylinder

Connection

Customer service.

SAFETY CHECK

Annual check operation:

WARNING: ONLY AN AUTHORIZED GAS TECHNICIAN SHOULD INSTALL THIS PRODUCT.

PROPER ASSEMBLY IS THE RESPONSIBILITY OF THE INSTALLER.

a. Remove the observation window panel by unscrewing

two bolts.

b. Turn on LP gas cylinder valve.

c. Apply several drops (or use spray bottle) of the soapy

water solution onto gas hose connection and automatic

valve connection and the injector connection.

d. Inspect the connections and look for bubbles.

e. If no bubbles appear, the connection is safe.

f. If bubbles appear, there is a leak. Shut off the LP gas

cylinder valve, loosen and then re-tighten this connection.

g. Check for leaks again.

h. If bubbles still appear, close the LP gas valve and call our

tool-free customer service line at 1-866-814-0585. Do not

attempt to use the heater.

i. Hose checking steps:

(1) Unscrew the M6 x 14 bolts from the pole.

(2) Pull out the head assembly, hose & regulator from pole.

(3) Check if there are cracks or worn sections on the hose.

If any are found, replace the hose & regulator immediately.

(4) Check for leaks according to the above step by step

after replacing the hose & regulator.

Bolts

Observation

window panel

Gas hose connection

Injector connection

Automatic valve

connection

.Your heater was designed and approved for outdoor

use only. Do NOT use it inside a building, garage, or

any other enclosed area.

.Make sure surrounding areas are free of combustible

materials, gasoline, and other flammable vapours or

liquids.

.Ensure that there is no obstruction to air ventilation.

.Be sure all gas connections are tight and there are no

leaks.

.Be sure the cylinder cover is clear of debris.

.Be sure any component removed during assembly or

servicing is replaced and fastened prior to starting.

Before Lighting:

.Heater should be thoroughly inspected before each

use, and checked by a qualified service person at least

annually.

.If relighting a hot heater, always wait at least 5

minutes.

.Inspect the hose assembly for evidence of excessive

abrasion, cuts, or wear. Suspected areas should be

leak tested. If the hose leaks, it must be replaced prior

to operation. Only use the replacement hose

assembly specified by manufacturer.

Lighting:

Before Turning Gas Supply ON:

1. Turn the control knob to the “OFF” position.

2. Turn LP Cylinder gas valve to fully open position.

3. Push in the control knob and turn counter-clockwise

to "LOW" position. If needed, keep depressing and

turning control knob counter-clockwise until the burner

lights. (You will hear a clicking noise).

4. Once the burner is lit, keep the control knob

depressed for 30 seconds before releasing.

5. If the burner does not stay lit, repeat steps 3 and 4.

6. If the burner still does not stay lit:

a. Push in gas control knob and turn counter-clockwise

to the “LOW” position.

b. While depressing the control knob,insert a long stem

lighter into the ignition hole on the emitter screen,and

light the burner.

c. Repeat step 4.

7. To adjust the temperature, turn the control knob counter-

clockwise to the desired position.

8. To turn off the burner, push in the control knob and turn

clockwise to “OFF” position.

Flame Characteristics:

The flame pattern on the emitter screen should be visually

checked whenever the heater is operated. Normally the

burner flame is blue, but the tip of the flame may be yellow.

If flames extend beyond the surface of the emitter grid,

lift away from the burner, or carbon build-up appears as

a black spot on the emitter grid or reflector, the heater

should be turned off immediately. The heater should not

be operated again until the unit is serviced and/or repaired

by a qualified service technician.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Shinerich Riscaldatore da esterno

Shinerich

Shinerich SRPHN02 Manuale utente

Manuali Riscaldatore da esterno popolari di altre marche

empasa

empasa HMXD-E-NHS Manuale utente

Sunred

Sunred Indus Manuale utente

HEAT1

HEAT1 ECO pro-line 2300W Manuale utente

Heatmaxx

Heatmaxx SRPH98 Manuale utente

Sunjoy

Sunjoy A30600640 Manuale utente

Event Furniture

Event Furniture 16091 Guida alla risoluzione dei problemi

Prem-I-Air

Prem-I-Air EH1462 Manuale utente

Blumfeldt

Blumfeldt 10028637 Manuale utente

Sunjoy

Sunjoy L-PH011PSS-2 Manuale utente

Melissa

Melissa 670-202 Manuale utente

Quality Heating

Quality Heating THE-12DW Manuale utente

DCS

DCS PHFS-P4 Guida all'installazione

EUROM

EUROM 334241 Manuale utente

Lava Heat

Lava Heat Venetian Manuale utente

EHS Ltd.

EHS Ltd. HQH-2000W Manuale utente

VONROC

VONROC ALICUDI PH515AC Manuale utente

OZONA

OZONA Heatflow IF010997 Manuale operativo e di manutenzione

theBBQshop

theBBQshop 51611010 Guida all'installazione