3
TOOLS REQUIRED
The following tools are required for assembly of this product:
2, 4, 5, 6mm Allen keys
4, 5, 6mm socket-style Allen keys
Flathead screwdriver (notched)
10mm wrench
Torque wrench
Cable and housing cutters
High-quality grease
Blue threadlocker (Loctite 242)
GENERAL NOTES ABOUT MAINTENANCE
The Specialized Shiv is a high performance bicycle. All regular maintenance, troubleshooting, repair and parts
replacement must be performed by an Authorized Specialized Retailer. For general information regarding maintenance
of your bicycle, please refer to the Owner’s Manual. In addition, routinely perform a mechanical safety check before
each ride, as described in the Owner’s Manual.
• Great care should be taken to not damage carbon fiber or composite material. Any damage may result in a loss of structural
integrity, which may result in a catastrophic failure. This damage may or may not be visible in inspection. Before each ride,
and after any crash, you should carefully inspect your bicycle for any fraying, gouging, scratches through the paint, chipping,
bending, or any other signs of damage. Do not ride if your bicycle shows any of these signs. After any crash, and before you
ride any further, take your bicycle to an Authorized Specialized Retailer for a complete inspection.
• While riding, listen for any creaks, as a creak can be a sign of a problem with one or more components. Periodically examine
all surfaces in bright sunlight to check for any small hairline cracks or fatigue at stress points, such as welds, seams, holes,
and points of contact with other parts. If you hear any creaks, see signs of excessive wear, discover any cracks, no matter
how small, or any damage to the bicycle, immediately stop riding the bicycle and have it inspected by your Authorized
Specialized Retailer.
• Lifespan and the type and frequency of maintenance depends on many factors, such as frequency and type of use, rider
weight, riding conditions and/or impacts. Exposure to harsh elements, especially salty air (such as riding near the ocean
or in the winter), can result in galvanic corrosion of components such as the crank spindle and bolts, which can accelerate
wear and shorten the lifespan. Dirt can also accelerate wear of surfaces and bearings. The surfaces of the bicycle should
be cleaned before each ride. The bicycle should also be maintained regularly by an Authorized Specialized Retailer, which
means it should be cleaned, inspected for signs of corrosion and/or cracks and lubricated. If you notice any signs of
corrosion or cracking on the frame or any component, the affected item must be replaced.
• Regularly clean and lubricate the drivetrain according to the drivetrain manufacturer’s instructions.
• Do not use a high pressure water spray directly on the bearings. Even water from a garden hose can penetrate bearing seals
and crank interfaces, which can result in increased bearing and crank wear, which can affect the normal function of the
bearings. Use a clean, damp cloth and bicycle cleaning agents for cleaning.
• Do not expose the bicycle to prolonged direct sunlight or excessive heat, such as inside a car parked in the sun or near a
heat source such as a radiator.
WARNING! Failure to follow the instructions in this section may result in damage to the components
on your bicycle and will void your warranty, but, most importantly, may result in serious personal injury
or death. If your bicycle exhibits any signs of damage, do not use it and immediately bring it to your
Authorized Specialized Retailer for inspection.
WARRANTY
A copy of the Specialized Limited Warranty Policy For Bicycles is provided with your bicycle, and is available from
your Authorized Specialized Retailer. It is also available for download at www.specialized.com.
