ShowPro H1 PROFILE Manuale utente
1
H1 PROFILE
MANUAL
PSHMOV100
2
CONTENTS
SAFETY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
INTRODUCTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
PHOTOMETRICS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
COLOUR & GOBOS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
DIMENSIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
OVERVIEW - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
CONNECTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
MENU - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
DMX CHART - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
MAINTENANCE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
TROUBLESHOOTING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
3
SAFETY
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with care for future reference, it contains important information about the
installation, use and maintenance of the unit.
General instructions
- The products referred to in this manual conform to the European Community Directives and
are therefore marked with CE.
- The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled
personnel only. Never make any modifications on the unit not described in this instruction
manual, otherwise you risk an electric shock.
- Connection must be made to a power supply system fitted with efficient earthing (Class I
appliance according to standard EN60598-1). It is recommended to protect the supply lines
of the units from indirect contact and/or shorting by using appropriately sized residual current
devices.
- The connection to the main network of electric distribution must be carried out by a
qualified electrical installer. Check that the mains frequency and voltage correspond to those
for which the unit is designed as given on the electrical data label.
- This unit is not for home use, only use for professional applications.
- Never use the fixture under the following conditions:
• in places subject to vibrations or bumps;
• in places with a temperature of over 40 ℃.
- Make certain that no flammable liquids, water or metal objects enter the fixture.
- Do not dismantle or modify the fixture.
- All work must always be carried out by qualified technical personnel. Contact the nearest
sales point for an inspection or contact the manufacturer directly.
- If the unit is to be put out of operation definitively, take it to a local recycling plant for a
disposal which is not harmful to the environment.
4
Warnings and installation precautions
- If this device is operated in any way different to the way described in this manual, it may
suffer damage and the warranty becomes void. Any unauthorized operation may lead to
dangers like short circuit, burns, electric shock, etc.
- Before starting any maintenance work or cleaning the fixture, cut off power from the main
supply.
- Always additionally secure the fixture with a safety chain. When carrying out any work,
always comply scrupulously with all the regulations (particularly regarding safety) currently in
force in the country in which the fixture is being used.
- Install the fixture in a well-ventilated place.
- Keep any flammable materials at a safe distance from the fixture.
- Shields, lenses or ultraviolet screens shall be changed if they have become damaged to
such an extent that their effectiveness is impaired.
- The lamp shall be changed if it has become damaged or thermally deformed.
- Never look directly at the light beam. Note that fast changes in lighting, e.g. flashing lights,
may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
- Do not touch the product’s housing when operating because it may be very hot.
INTRODUCTION
Features
• A perfect combination of beam/spot/wash with HID light source
• 480w 6500K PHILIPS lamp
• Ultra-bright output of 130K lux @ 20m
• Crisp beam from lens to end at every beam angle
• Consistent brightness from centre to edge
• 2.1°~41.5° wide zoom angle
• CMY colour mixing (CMY+15 filters)
• 19 fixed gobos + 8 rotating gobos
• 1 animation wheel
• Bi-directional 4-facet and 8-facet prisms with variable speed
• DMX and RDM control
5
SPECIFICATIONS
Light Source: 480W PHILIPS lamp
Output: 16300lm
Illuminance: 130k @ 20m
Colour Temperature: 6500K ± 400K
Beam Angle: Beam mode: 2.1°~29° Spot mode: 2.3°~41.5°
Pan: 540° (16 bit)
Tilt: 270° (16 bit)
Colour: CMY + 15 filters
Gobos: 1 static gobo wheel (19 + open)
1 rotating gobo wheel (8 + open)
Animation: 1 animation wheel
Focus: Motorized focus
Frost: 10° frost
Strobe: 0~12Hz
Dimming: 0~100%
Prism: 4-facet and 8-facet bi-directional, indexable rotating
Protocol: DMX512/RDM
DMX Channels: 31CH
Data Connections: XLR In/Out for DMX
Display: TFT Display
Mains: 100~240 VAC, 50/60 Hz
Consumption: 650W/230V
Power Connections: TRUECON In
Materials: Aluminium alloy
Finish: Matte black
Ambient Temp: -10℃~45℃
Dimensions: 400.1 x 277.4 x 626.3 mm
Weight: 25kg
6
PHOTOMETRICS
7
COLOUR & GOBOS
Colour
Animation
Rotating Gobos
Static Gobos
8
DIMENSIONS
9
OVERVIEW
Fixture Illustration
1. Control Panel 4. Fuse
2. 3/5 Pin DMX In 5. Power In
3. 3/5 Pin DMX Out 6. Omega Bracket Plate
Control Panel
UP:Increase value or scroll up
DOWN: Decrease value or scroll down
LEFT: Return to previous menu
RIGHT: Move between units, tens, hundreds
OK:Confirm and save setting
10
INSTALLATION
The H1 must be set up on a solid and even surface.
By means of the brackets on the baseplate, the unit can also be mounted upside down to a
cross arm. For mounting, strong, stable clamps are required.
The bolts of the brackets are placed into the openings provided in the base plate and turned
clockwise until they lock.
Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating.
The mounting place must be of sufficient stability and be able to support a weight of 10 times
the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations
(particularly regarding safety) currently in force in the country in which the fixture is being
used.
Always additionally secure the fixture with a safety chain. For this purpose, fasten the safety
chain in a suitable position so that the maximum fall of the fixture will be 20 cm.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ShowPro Attrezzatura di illuminazione
ShowPro
ShowPro ProShop LED PAR Hex-7 Manuale utente
ShowPro
ShowPro PLUTO 250 Manuale utente
ShowPro
ShowPro MoonLite 80 HEX Manuale utente
ShowPro
ShowPro MoonLite 150 HEX Manuale utente
ShowPro
ShowPro X-Blinder Manuale utente
ShowPro
ShowPro NITEC photon multi LEDNIT141 Manuale utente
ShowPro
ShowPro Truss Mate II Manuale utente
ShowPro
ShowPro PLUTO 600 PROFILE Manuale utente
ShowPro
ShowPro LED EPAR CW MULTI Manuale utente
ShowPro
ShowPro K65 IP Manuale utente
