Shure SLX-D Manuale utente

SLX-D

Wireless System

Shure SLX-D Digital Wireless system guide. Includes how to set up receiver, check sound and gain, and see groups and channels.

Version: 5.7 (2024-A)

Shure Incorporated
2/56
Table of Contents
SLX-D   Wireless System 4
Overview 4
Features 4
System Components 4
SLX-D Transmitters 4
SLXD4 / SLXD4D Receiver 5
SLXD5 Bodypack Receiver 6
SLXD4 Setup 7
SLXD5 Setup 8
SLXD4 Hardware Callouts 9
SLXD5 Hardware Callouts 11
Navigating the Receiver Menus 13
Transmitters 17
Transmitter Menu Options and Navigation 19
Locking and Unlocking the Receiver Controls 20
Batteries and Chargers 21
Microphone Battery Installation 21
Setting the AA Battery Type 22
Shure SB903 Rechargeable Battery 22
Important Tips for Care and Storage of Shure Recharge
able Batteries 25
Average Charging Times 25
Sound Check and Gain Adjustment 25
SLXD4 26
SLXD5 26
System Set Up 26
Creating Audio Channels 26
What are Groups and Channels? 26
Scan and IR Sync 27
Manual Frequency Selection 27
Using the Guided Frequency Setup 27
Linking Two Transmitters to a Receiver 28
Multi-Mic Mode 28
Adding SLX-D to Other Shure Wireless Systems 30
Radio Frequency (RF) Settings 30
Setting the Transmitter RF Power 30
Networking 30
Connecting to a Network 30
Automatic IP Addressing 30
Configuration Tips 30
Network Troubleshooting 31
Connecting to an External Control System 31
Firmware Updates 31
Updating the Transmitter Firmware 32
Firmware Release Requirements 32
Mount the SLXD4 Receiver in a Rack 32
Installing Footpads 33
Optional Accessories 33
Specifications 37
Receiver Output Connectors 47
Transmitter Input 48
Frequency Range and Transmitter Output Power 48
Frequencies for European Countries 49
Important Safety Information 50
Explanation of Symbols 50
Important Safety Instructions 50
Safety Information for Batteries 51
Safety and Regulatory Information for Battery Chargers 52

Shure Incorporated

3/56

Important Product Regulatory Information 52

Introduction to EMC 52

Regulatory Information for Wireless Products Utilizing TV

Frequency Bands 53

Environmental Regulatory Information 55

Battery Regulatory Information 56

Certifications 56

Energy Efficiency 56

Certification and Compliance Markings 56

Shure Incorporated

4/56

•

SLX-D

Wireless System

Overview

SLX-D Digital Wireless delivers clear audio and stable RF performance with easy setup and rechargeability options. SLX-D is

built to handle a wide range of applications, from day-long conferences to nighttime performances.

Automatic channel scan and IR sync are even easier with a guided setup feature programmed into each SLXD wireless re

ceiver. Manage multiple-system group scans and firmware updates with third-party setup and control via Ethernet. Operate up

to 32 compatible systems per 44 MHz band for up to 8 hours from 2 AA batteries, or add Shure SB903 rechargeable batteries

and charger accessories. SLXD provides >118 dB dynamic range and stable, efficient RF transmission for a selection of hand

held, lavalier and headset microphones.

Features

Transparent 24-bit digital audio

Extended 20 Hz to 20 kHz frequency range (microphone dependent)

118 dB dynamic range

Digital predictive switching diversity

44 MHz tuning bandwidth (region dependent)

32 available channels per frequency band (region dependent)

Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band

Easy pairing of transmitters and receivers over IR scan and sync

Automatic channel scan

Link multiple receivers for group scan and firmware updates via Ethernet port

Compatible with Shure Wireless Workbench control software

Remote monitoring and control via ShurePlus Channels app

Third-party setup and control via Ethernet

Elegant and easy-to-use interface with high-contrast LCD menu

Guided setup mode installed in each SLX-D receiver

Transmitters use 2 AA batteries or Shure SB903 rechargeable battery

System configurations include handheld transmitters with interchangeable microphone capsules, bodypacks with a range

of lavalier, headset and instrument microphones and single and dual rack-mountable receivers.

System Components

Your SLX-D system is available in multiple configurations of transmitters, receivers, and microphones to meet your specific

needs. For a full list of available system configurations, visit shure.com or contact your local sales rep.

SLX-D Transmitters

①

SLXD1 bodypack (BP) transmitter

™

Shure Incorporated

5/56

②

SLXD2 handheld (HH) transmitter

③

SLXD3 plug-on (PO) transmitter

SLXD4 / SLXD4D Receiver

①

Rack mounting hardware

②

¼-wave antennas (2)

③

Power supply

④

1.5V AA batteries (2)

⑤

SLXD4 or SLXD4D receiver

Shure Incorporated

6/56

SLXD5 Bodypack Receiver

①

SLXD5 portable receiver

②

Locking 3.5mm-to-XLR cable (18")

③

Locking 3.5mm audio extender cable (16")

④

1.5V AA batteries (2)

⑤

Standard ¼" thread non-conductive camera shoe adapter

Note: Use this adapter to prevent ground loop noise

⑥

Zippered vinyl bag (black)

Shure Incorporated

7/56

SLXD4 Setup

Attach the included antennas to the back of the receiver.

Connect the power supply to the receiver and plug the cord into an AC power source.

Shure Incorporated

8/56

Connect the audio output to an amplifier or mixer.

Press the power button on the receiver. Use the menu to set the system to microphone (mic) or instrument (line) level

as appropriate.

SLXD5 Setup

With the power switch in the O (off) position, insert the battery or connect the USB-C port on the bottom to a suitable

power source.

Connect the audio output to a camera or recorder.

Note: Set the Audio Out to Dual Mono for 3.5mm devices, or to Balanced (Mono) for XLR devices in the receiver menu.

Shure Incorporated

9/56

◦

Turn on the power by pushing the switch to the I (on) position. Use the menu to set the system to microphone (mic) or

instrument (line) level as appropriate.

SLXD4 Hardware Callouts

①Sync LED

Flashing: IR sync mode is enabled

Shure Incorporated

10/56

◦

Solid: Receiver and transmitter aligned for IR sync

②IR port

Align with the transmitter IR port during an IR sync to program transmitters.

③Display

Shows menu options, receiver and transmitter settings.

④Sync button

Press to activate IR sync.

⑤Exit button

Press to cancel and exit the current operation.

⑥Control knob

Change menu parameters. Push knob to confirm changes.

⑦Power button

Powers receiver on or off.

⑧Power supply port

Connection point for DC power supply.

⑨Ethernet port

For network connection.

Amber LED (network speed):

off = 10 Mbps, on = 100 Mbps

Green LED (network status):

off = no network link, on = network link active

flashing = rate corresponds to traffic volume

⑩XLR audio output

Balanced (1: ground, 2: audio +, 3: audio - )

Altri manuali per SLX-D

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Shure Sistema microfonico

Manuali Sistema microfonico popolari di altre marche

Paso

Paso R824 Manuale utente

Naxa

Naxa NAM-982 Manuale utente

Motorola

Motorola PMNN4461 Manuale utente

Xvive

Xvive U3 Manuale utente

Tekon

Tekon DUOS Manuale utente

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuale utente

Devine

Devine WMD-IE Manuale utente

LG LF-D7150 Manuale utente

GE S768DAV Manuale utente

LD U305 HBH 2 Manuale utente

Chainway

Chainway URA8 Manuale utente

ORATOR

ORATOR D860TD Manuale utente

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuale utente

Alpha Technologies

Alpha Technologies RBMS Manuale utente

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuale utente

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuale utente

Pyle

Pyle PDWM5000 Manuale utente

Airspan

Airspan AS4000 Guida