Shure 520DX Manuale utente

27A13222 (Rev. 2)

Printed in U.S.A.

MICROPHONE POUR HARMONICA

520DX (GREEN BULLET)

MICROPHONE POUR HARMONICA

520DX (GREEN BULLET)

HARMONIKA-MIKROFON 520DX

(GREEN BULLET)

HARMONIKA-MIKROFON 520DX

(GREEN BULLET)

MICROFONO 520DX PARA ARMONICA

(GREEN BULLET)

MICROFONO 520DX PARA ARMONICA

(GREEN BULLET)

MICROFONO DA ARMONICA 520DX

(GREEN BULLET)

MICROFONO DA ARMONICA 520DX

(GREEN BULLET)

520DX “GREEN BULLET”

HARMONICA MICROPHONE

520DX “GREEN BULLET”

HARMONICA MICROPHONE

Wired Microphones

520DX

N108

МИКРОФОН ДЛЯ ГУБНОЙ ГАРМОНИКИ 520DX

«GREEN BULLET»

МИКРОФОН ДЛЯ ГУБНОЙ ГАРМОНИКИ 520DX

«GREEN BULLET»

520DXハーモニカマイクロホン

(グリーンブレット)

520DXハーモニカマイクロホン

(グリーンブレット)

520DX “GREEN BULLET” 하모니카 마이크

520DX “GREEN BULLET”口琴用话筒

GENERAL

Contoured to fit comfortably in the palm of your hand, the Model 520DX “Green Bullet”

microphone produces the unique sound that has made it a legend among harmonica

players.

The 520DX features a volume control knob at the base of the microphone that allows

musicians to make adjustments to suit their needs during a live performance. An

attached cable with a standard 1/4-inch phone plug allows the microphone to be

connected to a high-impedance device.

APPLICATIONS

Connect the 520DX directly into a guitar amplifier to produce the classic blues harp

sound. Use the following guidelines:

The volume control on the microphone should be turned down before plugging it into•

an amplifier. As you move away from the amplifier, the volume can be turned up.

Adjust the microphone’s volume control knob during performances as needed. For•

example, when switching from playing rhythm to lead or to place the microphone on

standby between sets.

To avoid feedback, maintain as much distance as possible from monitors or•

loudspeakers. Adjust the volume of monitors or loudspeakers at the mixing console

so that no feedback is present when the volume control knob on the harmonica

microphone is at its maximum setting.

NOTE: The volume setting of the guitar amplifier may have a significant effect on the

overall tone produced. Experiment with different microphone and amplifier volume

settings to achieve the desired effect.

VOLUME CONTROL

VOLUME CONTROL KNOB

OFF

LOW IMPEDANCE

2000000001000150 100

98765432 98765432

+10

–10

To connect the 520DX to a low impedance device, such as a mixer, use a low-to-high

impedance-matching line transformer, such as the Shure model A95U.

NOTE: The 520DX can be rewired for low impedance, but this disables the volume

control. Contact the Shure Applications Group at (847) 600-8440 for more information.

SPECIFICATIONS

Type Dynamic

Frequency Response 100 to 5,000 Hz

Polar Pattern Omnidirectional

Impedance High, unbalanced

Load Impedance Range Minimum:100kΩ

Output Level (at 1,000 Hz) Open Circuit Voltage –38.0 dBV/Pa (13 mV)

1 Pa = 94 dB SPL

Polarity Positive sound pressure on diaphragm pro-

duces positive voltage on tip with respect to

sleeve (ground) of microphone output phone

plug connector

Cable 6.1 m (20 ft) two conductor shielded with

standard 1/4-inch phone plug attached (sup-

plied wired for high-impedance, unbalanced

connection)

Case Green and chrome finished die casting

Dimensions 63 mm (2.5 in) max diameter, 82.6 mm (3 1/4

in) long

Net Weight (with cable) 737 grams (26 oz)

TYPICAL FREQUENCY RESPONSE

Certification

INTERNAL CONNECTIONS

UNBALANCED HIGH-IMPEDANCE OUTPUT

YELLOW

BLUE

WHITE

BLACK

RED ORANGE

BROWN

RED

GRAY

BLACK

RED

SHIELD

BLACK

TIP

Eligible to bear CE Marking. Conforms to European EMC Directive 2004/108/EC.

Meets Harmonized Standards EN55103-1:1996 and EN55103-2:1996, for residential

(E1) and light industrial (E2) environments.

The Declaration of Conformity can be obtained from:

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department EMEA Approval

Wannenacker Str. 28

D-74078 Heilbronn, Germany

Phone: +49 7131 72 14 0

Fax: +49 7131 72 14 14

E-Mail: [email protected]

CONNECTIONS

The RED lead is the high-impedance audio output; the SHIELD is the audio return and

case ground.

The Model 520DX Green Bullet Microphone is supplied wired for high-impedance, un-

balanced operation with the 1/4-inch phone plug.

REPLACEMENT PARTS

Cartridge R198

Cable and Plug 95A2353

Volume Control Pot 90A4487

For additional service or parts information, please contact Shure’s Service department

at 1-800-516-2525. Outside the United States, please contact your authorized Shure

Service Center.

Altri manuali per 520DX

Indice

Altri manuali Shure Microfono

Manuali Microfono popolari di altre marche

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuale utente

DAPAudio

DAPAudio RM-101 Manuale utente

AKG

AKG CHM 21 Manuale utente

Sennheiser

Sennheiser evolution wireless series EM 100 Manuale utente

Sony

Sony C-48 Manuale utente

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuale utente

auna PRO

auna PRO MIC-900 Manuale utente

AKG

AKG D 3800 Manuale utente

MAIIN SOUND

MAIIN SOUND IIN style Manuale utente

Earthworks

Earthworks TC25 Manuale utente

Sennheiser

Sennheiser evolution D1 Manuale utente

Alesis

Alesis MicLink Wireless Manuale utente

DSPPA

DSPPA D6234 Manuale utente

Monacor

Monacor IMG STAGELINE ECM-300B Manuale utente

Ansr Audio

Ansr Audio Scan16 Manuale utente

JLab

JLab GO TALK Manuale utente

Renkforce

Renkforce TY-109 Manuale utente

Trust

Trust 31008 Manuale utente