Shuttle MS52PN Manuale utente
MS52PN
Intel Pentium 4
478-pinProcessor
with 533/400 MHz FSB
Based DDR MAINBOARD
User's Manual
M967
Shuttle®MS52PN
Intel Pentium 4
478-pin Processor
with 533/400 MHz FSB
Based DDR Mainboard
Manual Version 1.0
Copyright
Copyright©2004 by Shuttle®Inc.AllRightsReserved.
This publication, including all photos, illustrations, and software, is protected under interna-
tional copyright laws, with all rights reserved. Reproducing any of the material contained
herein is prohibited without the consent of the publisher.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
nVIDIAisaregisteredtrademarkofnVIDIACorporation.
AMD,Athlon,andDuronareregisteredtrademarksofAMD Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC 230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName:MS52PN
S/N:N/A
CPU:
200 MHz
Pentium 4 3.2, 2.8 GHz
133 MHz
Pentium 4 2.26, 2.40, 2.53, 2.66, 2.80, 3.06 GHz
100 MHz
Pentium 4 1.6, 1.8, 2.0, 2.2, 2.4 GHz
Serial Port: one port with 9 pins
Parallel Port: one port with 25 pins
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
USB Port: two ports with 4 pins respectively
LAN Port: one port with 8 pins
Line-Out & Line-In & Microphone Ports: one port for each
Game Port: one port with 15 pins
DIMM Memory: DDR 400 256 MB *2
Power Cable: Detachable and Shielded (with a GND pin)
Monitor: CRT+DVI
Maximum Resolution: 1280 X 1024 V:60Hz
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode
1
2
3
4
External Frequency
200 MHz
200 MHz
133 MHz
133 MHz
CPU
P4 3.2G
P4 3.2G
P4 3.06G
P4 3.06G
Case Open/Close
Close
Open
Close
Open
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:32.768KHz(Y3)/24.576MHz(Y2)/25.000MHz(Y4)/12.000MHz(Y5)/
14.318MHz(Y1)
Clock Generator: N/A
(D) Supported Host Peripherals:
(F) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3.An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5.Make sure an EMI shielding attached to a case hasproperly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name
#1 Case MS52PN
#2 Seventeam Power Supply ST-250HK
#3 IBM HDD (82.3GB) IC35L080AVVA07-0
#4 Panasonic FDD JU-257A606P
#5 CODE CD-ROM DVD-116
- 1 -
TABLE OF CONTENTS
WHAT'S IN THE MANUAL.................................................................... 4
Quick Reference............................................................................................... 4
About This Manual ........................................................................................... 4
1 INTRODUCTION................................................................................ 5
1.1 TO DIFFERENT USERS ............................................................................. 5
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 5
EXPERIENCEDDIYUSER ......................................................................... 5
SYSTEMINTEGRATOR............................................................................... 5
1.2 ITEM CHECKLIST: ...................................................................................... 6
2 FEATURES ........................................................................................ 7
2.1 SPECIFICATIONS ....................................................................................... 7
3 HARDWARE INSTALLATION..........................................................10
3.1 STEP-BY-STEP INSTALLATION............................................................... 10
STEP1 Install theCPU ...............................................................................11
STEP 2 Set Jumpers ................................................................................. 12
STEP3 Install DDRSDRAM System Memory............................................ 12
STEP4Install InternalPeripherals inSystem Case .................................... 13
STEP5 Mount theMainboard on the ComputerChassis ............................ 14
STEP6Connect FrontPanel LEDs/Switches/USBs/Audio ........................ 15
STEP 7 Connect IDE and Floppy Disk Drives ............................................ 16
STEP8Connect OtherInternalPeripherals................................................ 17
STEP9 Connect the Power Supplies......................................................... 18
STEP10 InstallAdd-onCards in ExpansionSlots ...................................... 18
STEP11 Connect External Peripherals to BackPanel ............................... 19
STEP12 System Boot UpFor the First-Time ............................................. 20
STEP13 InstallDrivers & Software Components ....................................... 21
3.2 JUMPER SETTINGS ................................................................................. 22
JUMPERS& CONNECTORSGUIDE........................................................ 23
Jumpers
Clear CMOS Setting (JP1)........................................................................ 26
BIOSProtect Setting (JP3) ....................................................................... 26
- 2 -
Back Panel Connectors
PS/2Mouse & PS/2 Keyboard Port Connectors ........................................ 27
ParallelPortConnector .............................................................................. 27
COM1Port Connector ............................................................................... 27
GamePort Connector ................................................................................ 27
VGAPort Connector .................................................................................. 27
Line_Out PortConnector........................................................................... 28
Line_InPortConnector .............................................................................. 28
MicrophonePortConnector ....................................................................... 28
LANPort Connector................................................................................... 28
USBPortConnectors ................................................................................ 28
Front Panel Connectors
HDDLED Connector (HDDLED) ............................................................... 29
Power/Sleep/Messagewaiting LED (ACPILED) ........................................ 29
HardwareResetConnector (RST).............................................................. 30
ATXPowerOn/Off SwitchConnector(PWR_SW) ...................................... 30
FrontPanelAudioHeader(AUDIO1).......................................................... 31
FrontPanel USB Headers(USB2/USB3)................................................... 31
Internal Peripheral Connectors
EnhancedIDE andFloppy Connectors (IDE1/IDE2& FDD1) ..................... 32
Other Connectors
ATXPower SupplyConnectors (ATX1/ATX2)............................................. 33
FanConnectors(CPUFAN1/PWRFAN1/CASFAN1) .................................. 34
IRHeader (IR1) .......................................................................................... 34
CD_INConnectors(CDIN1/CDIN2)............................................................ 35
WakeOnModem (WOM1)/WakeOn LAN(WOL1) Connectors ................. 35
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 36
INSTALLMEMORY .................................................................................... 36
UPGRADEMEMORY ................................................................................ 36
- 3 -
4 SOFTWARE UTILITY ......................................................................37
4.1 Mainboard CD Overview ......................................................................... 37
4.2 Install Mainboard Software ..................................................................... 38
4.2.A Install SIS AGP Driver ............................................................................ 39
4.2.B Install SIS IDE Driver............................................................................. 39
4.2.C Install SIS VGA Driver ........................................................................... 40
4.2.D Install SIS USB2.0 Driver ...................................................................... 40
4.2.E Install Realtek LAN Driver..................................................................... 41
4.2.F Install C-Media Audio Driver ................................................................. 41
4.3 View the User's Manual........................................................................... 42
5 BIOS SETUP ...................................................................................43
5.1 ENTER BIOS ............................................................................................. 43
5.2 THE MAIN MENU ...................................................................................... 44
STANDARD CMOS FEATURES ............................................................... 46
ADVANCED BIOS FEATURES................................................................. 48
ADVANCED CHIPSET FEATURES .......................................................... 52
INTEGRATEDPERIPHERALS .................................................................. 54
POWERMANAGEMENT SETUP.............................................................. 58
PNP/PCICONFIGURATIONS .................................................................... 62
PCHEALTH STATUS................................................................................ 64
Frequency/VoltageControl......................................................................... 65
LOAD FAIL-SAFE DEFAULTS .................................................................. 66
LOADOPTIMIZEDDEFAULTS ................................................................. 66
SETSUPERVISOR/USER PASSWORD................................................... 67
SAVE & EXIT SETUP................................................................................ 68
EXITWITHOUTSAVING ............................................................................ 68
- 4 -
Quick Reference
Hardware Installation >> Step-by-Step ................................................Page 10
Jumper Settings >> A Closer Look.......................................................Page 22
Software Utility >> How to Install..........................................................Page 40
BIOS Setup >> How to Configure.........................................................Page 43
About This Manual
For First-Time DIY System Builder .........................................................Page 5
For Experienced DIY User ......................................................................Page 5
For System Integrator .............................................................................Page 5
WHAT'S IN THE MANUAL
- 5 -
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed Chapter 3 Hardware Installation in a
step-by-step fashion for all the first-time DIY system builders. Prior to installa-
tion, we suggest you read the whole manual to gain a complete understanding
of your new MS52PN mainboard.
Experienced DIY User
Congratulate on your purchase of the MS52PN mainboard. You will find in-
stalling your new MS52PN mainboard is quite easy. Bundled with an array of
onboard functions, the highly-integrated MS52PN mainboard provides you with
a total solution to build the stablest and most reliable system. Referring to sec-
tion 3.2 Jumper Settings and Chapter 4 Software Utility, you will find
how to work out your new mainboard. Chapter 5 BIOS Setup also contains
the relevant information on how to tune up your system to achieve higher per-
formance.
System Integrator
You have wisely chosen MS52PN to construct your system. MS52PN incorpo-
rates all the state-of-the-art technology of the 651C+962L from SiS. Each inte-
grates the most advanced functions you've ever found in a compact micro-
ATX form board.
1INTRODUCTION
- 6 -
1.2 Item Checklist:
Check all items with your MS52PN mainboard to make sure nothing is
missing. A complete package should include:
-One Shuttle MS52PN Mainboard
-One ATA 133/100/66/33 Ribbon Cable
-One Floppy Ribbon Cable
-One Twin-Port USB Cable (optional)
-MS52PN User's Manual
-I/O Shielding
-One Bundled CD-ROM, including:
ØMS52PN user's manual in PDF format
ØSIS AGP Driver
ØSIS IDE Driver
ØSIS VGA Driver
ØSIS USB2.0 Driver
ØRealtek LAN Driver
ØC-Media Audio Driver
ØAward Flashing Utility
1
USB2
1
P
A
N
E
L
1
1
JP3
1JP1
CR2032
JAPANSTD
LITHIUMBATTERY
K T S
PCI1
PCI2
CPU_FAN1
CASFAN1
1
USB3
C
962L
SIS'02
PPD0704
0409FA
UA
C1
C
651
SIS'04
EPD0392
0413BAC1
P
A
C
-
1
2
0
5
1
IR1
FDD1
PWRFAN1
WOM1 WOL1
ATX1
ATX2
1
AUDIO1
CDIN1
1
CDIN2
1
VGA1
JS1
USBLAN1
PSKBM1
LPT1
COM1
S
S
BAT1
Indice
Altri manuali Shuttle Hardware per computer
Shuttle
Shuttle WLN-M Manuale utente
Shuttle
Shuttle AK38 Manuale utente
Shuttle
Shuttle MN31L Manuale utente
Shuttle
Shuttle D230 Manuale utente
Shuttle
Shuttle DH610S Series Manuale utente
Shuttle
Shuttle PCL71 Manuale utente
Shuttle
Shuttle WWN03 Istruzioni per l'installazione
Shuttle
Shuttle AS40GT Manuale utente
Shuttle
Shuttle CA10 Manuale utente
Shuttle
Shuttle AV18E Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
