SICK DT80 IO-Link Manuale utente
OPERATING INSTRUCTIONS
DT80 IO-Link
Distance sensor
Described product
DT80-xxxx1x (device variants with IO-Link interface)
Manufacturer
SICK AG
Erwin-Sick-Str. 1
79183 Waldkirch
Germany
Legal information
This work is protected by copyright. Any rights derived from the copyright shall be
reserved for SICK AG. Reproduction of this document or parts of this document is
only permissible within the limits of the legal determination of Copyright Law. Any modi‐
fication, abridgment or translation of this document is prohibited without the express
written permission of SICK AG.
The trademarks stated in this document are the property of their respective owner.
© SICK AG. All rights reserved.
Original document
This document is an original document of SICK AG.
25
2O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 8028220//2023-04-28 | SICK
Subject to change without notice
Contents
1 About this document........................................................................ 5
1.1 Information on the operating instructions.............................................. 5
1.2 Explanation of symbols............................................................................ 5
1.3 Further information................................................................................... 6
2 Safety information............................................................................ 7
2.1 Intended use............................................................................................. 7
2.2 Improper use............................................................................................. 7
2.3 Cybersecurity............................................................................................ 7
2.4 Limitation of liability................................................................................. 7
2.5 Modifications and conversions................................................................ 8
2.6 Requirements for skilled persons and operating personnel.................. 8
2.7 Operational safety and specific hazards................................................. 8
2.8 Warning signs on the device.................................................................... 9
3 Product description........................................................................... 11
3.1 Scope of delivery....................................................................................... 11
3.2 Type label.................................................................................................. 11
3.3 Overview of status indicators and operating elements.......................... 12
4 Transport and storage....................................................................... 13
4.1 Transport................................................................................................... 13
4.2 Unpacking.................................................................................................. 13
4.3 Transport inspection................................................................................. 13
4.4 Storage...................................................................................................... 13
5 Mounting............................................................................................. 14
5.1 Mounting instructions............................................................................... 14
5.2 Mounting the device................................................................................. 14
6 Electrical installation........................................................................ 15
6.1 Prerequisites for safe operation.............................................................. 15
6.2 Wiring instructions.................................................................................... 17
6.3 Connecting the device electrically........................................................... 17
7 Operation............................................................................................ 19
7.1 General notes............................................................................................ 19
7.2 Status LEDs............................................................................................... 19
7.3 Operation via pushbuttons and display................................................... 20
7.3.1 Display and operating buttons................................................ 20
7.3.2 Main menu............................................................................... 21
7.4 Operation via SOPAS ET........................................................................... 22
7.5 Operation via IO-Link................................................................................ 22
7.5.1 Process data............................................................................ 23
7.5.2 Configuring the IO-Link process data..................................... 23
CONTENTS
8028220//2023-04-28 | SICK O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 3
Subject to change without notice
7.5.3 Device data.............................................................................. 23
7.6 Description of operation........................................................................... 24
7.6.1 Manual Setup > Cycle time (measurement cycle time)............. 24
7.6.2 Manual Setup > Distance offset................................................... 24
7.6.3 Manual Setup > Filter (measured value filter)........................... 24
7.6.4 Manual Setup > Behav. no echo (Behavior for “no echo”).......... 25
7.6.5 Interface > Output Q1/Q2 > Active state (switching point
logic)......................................................................................... 25
7.6.6 Interface, Hysteresis parameter................................................. 25
7.6.7 Interface > Output Q1................................................................. 26
7.6.8 Interface > Output Q2 (Output Q2/Qa).................................... 29
7.6.9 Interface > Input IN1................................................................... 30
7.6.10 Device > Display brightness......................................................... 31
7.6.11 Device > Factory reset (reset to factory settings)...................... 31
7.6.12 Device > Laser control (switch measuring laser on/off)........... 31
7.6.13 Info............................................................................................ 31
7.6.14 Other functions........................................................................ 32
8 Maintenance...................................................................................... 33
8.1 Cleaning..................................................................................................... 33
8.2 Maintenance plan..................................................................................... 33
9 Troubleshooting................................................................................. 34
9.1 General faults, warnings, and errors....................................................... 34
9.2 Detecting and displaying errors............................................................... 34
9.3 Repairs...................................................................................................... 35
9.4 Returns...................................................................................................... 35
9.5 Disposal..................................................................................................... 35
10 Technical data.................................................................................... 36
10.1 Performance............................................................................................. 36
10.2 Interfaces.................................................................................................. 39
10.3 Mechanics/Electronics............................................................................. 39
10.4 Ambient data............................................................................................. 40
10.5 Dimensional drawing................................................................................ 41
11 Accessories........................................................................................ 42
12 Annex.................................................................................................. 43
12.1 Declarations of conformity and certificates............................................ 43
12.2 Licenses.................................................................................................... 43
CONTENTS
4O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 8028220//2023-04-28 | SICK
Subject to change without notice
1 About this document
1.1 Information on the operating instructions
These operating instructions provide important information on how to use devices from
SICK AG.
Prerequisites for safe work are:
•Compliance with all safety notes and handling instructions supplied.
•Compliance with local work safety regulations and general safety regulations for
device applications
The operating instructions are intended to be used by qualified personnel and electrical
specialists.
NOTE
Read these operating instructions carefully to familiarize yourself with the device and its
functions before commencing any work.
The operating instructions are an integral part of the product. Store the instructions
in the immediate vicinity of the device so they remain accessible to staff at all times.
Should the device be passed on to a third party, these operating instructions should be
handed over with it.
These operating instructions do not provide information on the handling and safe
operation of the machine or system in which the device is integrated. Information on
this can be found in the operating instructions for the machine or system.
1.2 Explanation of symbols
Warnings and important information in this document are labeled with symbols. Sig‐
nal words introduce the instructions and indicate the extent of the hazard. To avoid
accidents, damage, and personal injury, always comply with the instructions and act
carefully.
DANGER
…indicates a situation of imminent danger, which will lead to a fatality or serious
injuries if not prevented.
WARNING
…indicates a potentially dangerous situation, which may lead to a fatality or serious
injuries if not prevented.
CAUTION
…indicates a potentially dangerous situation, which may lead to minor/slight injuries if
not prevented.
NOTICE
…indicates a potentially harmful situation, which may lead to material damage if not
prevented.
NOTE
…highlights useful tips and recommendations as well as information for efficient and
trouble-free operation.
ABOUT THIS DOCUMENT 1
8028220//2023-04-28 | SICK O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 5
Subject to change without notice
1.3 Further information
More information can be found on the product page.
The call is made via the SICK Product ID: pid.sick.com/{P/N}/{S/N}
{P/N} corresponds to the part number of the product, see type label.
{S/N} corresponds to the serial number of the product, see type label (if indicated).
The following information is available depending on the product:
•Data sheets
•This document in all available language versions
•CAD files and dimensional drawings
•Certificates (e.g., declaration of conformity)
•Other publications
•Software
•Accessories
1 ABOUT THIS DOCUMENT
6O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 8028220//2023-04-28 | SICK
Subject to change without notice
2 Safety information
2.1 Intended use
The DT80 distance sensor is an optoelectronic sensor and is used for optical, non-con‐
tact distance measurement of objects.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.2 Improper use
Any use outside of the stated areas, in particular use outside of the technical specifica‐
tions and the requirements for intended use, will be deemed to be incorrect use.
•The device does not constitute a safety component in accordance with the respec‐
tive applicable safety standards for machines.
•The device must not be used in explosion-hazardous areas, in corrosive environ‐
ments or under extreme environmental conditions.
•Any use of accessories not specifically approved by SICK AG is at your own risk.
WARNING
Danger due to improper use!
Any improper use can result in dangerous situations.
Therefore, observe the following information:
■Product should be used only in accordance with its intended use.
■All information in the documentation must be strictly observed.
■Shut down the product immediately in case of damage.
2.3 Cybersecurity
Overview
To protect against cybersecurity threats, it is necessary to continuously monitor and
maintain a comprehensive cybersecurity concept. A suitable concept consists of organi‐
zational, technical, procedural, electronic, and physical levels of defense and considers
suitable measures for different types of risks. The measures implemented in this
product can only support protection against cybersecurity threats if the product is used
as part of such a concept.
You will find further information at www.sick.com/psirt, e.g.:
•General information on cybersecurity
•Contact option for reporting vulnerabilities
•Information on known vulnerabilities (security advisories)
2.4 Limitation of liability
Relevant standards and regulations, the latest technological developments, and our
many years of knowledge and experience have all been taken into account when
compiling the data and information contained in these operating instructions. The
manufacturer accepts no liability for damage caused by:
■Non-adherence to the product documentation (e.g., operating instructions)
■Incorrect use
■Use of untrained staff
■Unauthorized conversions or repair
SAFETY INFORMATION 2
8028220//2023-04-28 | SICK O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 7
Subject to change without notice
■Technical modifications
■Use of unauthorized spare parts, consumables, and accessories
2.5 Modifications and conversions
NOTICE
Modifications and conversions to the device may result in unforeseeable dangers.
Interrupting or modifying the device or SICK software will invalidate any warranty claims
against SICK AG. This applies in particular to opening the housing, even as part of
mounting and electrical installation.
2.6 Requirements for skilled persons and operating personnel
WARNING
Risk of injury due to insufficient training.
Improper handling of the device may result in considerable personal injury and material
damage.
■All work must only ever be carried out by the stipulated persons.
The following qualifications are required for various activities:
Table 1: Activities and technical requirements
Activities Qualification
Mounting, maintenance ■Basic practical technical training
■Knowledge of the current safety regulations in the workplace
Electrical installation,
device replacement
■Practical electrical training
■Knowledge of current electrical safety regulations
■Knowledge of the operation and control of the devices in their
particular application
Commissioning, configura‐
tion
■Basic knowledge of the computer operating system used
■Basic knowledge of the design and setup of the described
connections and interfaces
■Basic knowledge of data transmission
Operation of the device for
the particular application
■Knowledge of the operation and control of the devices in their
particular application
■Knowledge of the software and hardware environment for the
particular application
2.7 Operational safety and specific hazards
Please observe the safety notes and the warnings listed here and in other sections
of this product documentation to reduce the possibility of risks to health and avoid
dangerous situations.
2 SAFETY INFORMATION
8O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 8028220//2023-04-28 | SICK
Subject to change without notice
CAUTION
Optical radiation: Class 2 Laser Product
The human eye is not at risk when briefly exposed to the radiation for up to 0.25
seconds. Exposure to the laser beam for longer periods of time may cause damage to
the retina. The laser radiation is harmless to human skin.
■Do not look into the laser beam intentionally.
■Never point the laser beam at people's eyes.
■If it is not possible to avoid looking directly into the laser beam, e.g., during
commissioning and maintenance work, suitable eye protection must be worn.
■Avoid laser beam reflections caused by reflective surfaces. Be particularly careful
during mounting and alignment work.
■Do not open the housing. Opening the housing may increase the level of risk.
■Current national regulations regarding laser protection must be observed.
Caution – Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
It is not possible to entirely rule out temporary disorienting optical effects, particularly
in conditions of dim lighting. Disorienting optical effects may come in the form of
dazzle, flash blindness, afterimages, photosensitive epilepsy, or impairment of color
vision, for example.
WARNING
Electrical voltage!
Electrical voltage can cause severe injury or death.
■Work on electrical systems must only be performed by qualified electricians.
■The power supply must be disconnected when attaching and detaching electrical
connections.
■The product must only be connected to a voltage supply as set out in the require‐
ments in the operating instructions.
■National and regional regulations must be complied with.
■Safety requirements relating to work on electrical systems must be complied with.
WARNING
Risk of injury and damage caused by potential equalization currents!
Improper grounding can lead to dangerous equipotential bonding currents, which may
in turn lead to dangerous voltages on metallic surfaces, such as the housing. Electrical
voltage can cause severe injury or death.
■Work on electrical systems must only be performed by qualified electricians.
■Follow the notes in the operating instructions.
■Install the grounding for the product and the system in accordance with national
and regional regulations.
2.8 Warning signs on the device
A class 2 laser is installed in the device. The housing is labeled with a warning sign.
SAFETY INFORMATION 2
8028220//2023-04-28 | SICK O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 9
Subject to change without notice
1
2
3
Complies with 21 CFR 1040.10
and
1040.11 except for
conformance with
IEC 60825-1
Ed. 3., as
described in Laser
Notice
No. 56, dated May 8, 2019.
EN/IEC 60825-1:2014
MAX. AVERAGE OUTPUT < 1mW
PULSE LENGTH > 400PS
WAVELENGTH = 655 nm
Figure 1: Warning symbol on the device: Class 2 Laser Product (EN/IEC 60825-1:2014), identical
laser class for issue EN/IEC 60825-1:2007
1EN/IEC 60825-1:2014
Conforms to 21 CFR 1040.10 and 1040.11 except for conformance to IEC 60825-1 Ed.
3, as described in Laser Notice No.56 dated 8May2019.
2Laser radiation – Never look into the light beam– Laser class 2 (EN/IEC 60825-1:2014)
3Max. average power <1mW
Wavelength = 655nm
Pulse length >400ps
2 SAFETY INFORMATION
10 O P E R A T I N G I N S T R U C T I O N S | DT80 IO-Link 8028220//2023-04-28 | SICK
Subject to change without notice
Indice
Altri manuali SICK Accessori
SICK
SICK CFP CUBIC Manuale utente
SICK
SICK TiM781 Manuale utente
SICK
SICK multiScan136 Manuale utente
SICK
SICK T-EASIC FTS Manuale utente
SICK
SICK PowerProx WTT190L-K Series Manuale utente
SICK
SICK GLS6 Manuale utente
SICK
SICK SureSense HTB18L Series Manuale utente
SICK
SICK MRS1000 Manuale utente
SICK
SICK LD-LRS Manuale utente
SICK
SICK G6 Inox Manuale utente
SICK
SICK GRTE18 Manuale utente
SICK
SICK WTB4-3 Manuale utente
SICK
SICK LBV 321 NAMUR Manuale utente
SICK
SICK WLD26 Manuale utente
SICK
SICK Inspector PIM60 Manuale utente
SICK
SICK MultiPulse WTB4-3P2100S14 Manuale utente
SICK
SICK GRTE18V Manuale utente
SICK
SICK PSS Prime Manuale utente
SICK
SICK RFU61 Series Manuale utente
SICK
SICK deTec4 Core Manuale utente
