Siemens C65 Guida all'installazione

Company Confidential

Page 1of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

Service Repair Documentation

Level 2.5 - C65

Release Date Department Notes to change

1.0 01.06.2004 ICM MP CCQ GRM T New document

Company Confidential

Page 2of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

Introduction

This Service Repair Documentation is intended to carry out repairs on Siemens repair level

2.5. The described failures shall be repaired in Siemens authorized local workshops.only

All repairs have to be carried out in an ESD protected environment and with ESD protected

equipment/tools. For all activities the international ESD regulations have to be considered.

Assembling/disassembling has to be done according to the latest C65 Level 2 repair

documentation. It has to be ensured that every repaired mobile Phone is checked according

to the latest released General Test Instruction document (both documents are available in

the Technical Support section of the C-market).

Check at least weekly C-market for updates and consider all C65 related Customer Care

Information

C65 Partnumber on IMEI label: S30880-S7800-#xxx

, while # may be any letter (A-Z) and xxx may be any number from 100, 101, 102....

If you have any questions regarding the repair procedures or technical questions spare not

hesitate to contact our technical support team in Kamp-Lintfort, Germany:

Tel.: +49 2842 95 4666

Fax: +49 2842 95 4302

e-mail: [email protected]

Company Confidential

Page 3of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

Table of Content

1C65 board layout ...........................................................................................................................4

2Connector SIM Card Reader.........................................................................................................5

3Connector IO Jack.........................................................................................................................6

4Connector Board to Board...........................................................................................................75

Connector Battery .........................................................................................................................8

6IRDA Diode ...................................................................................................................................9

7Connector Display .......................................................................................................................10

8Connector Camera ......................................................................................................................11

9Connector RF ..............................................................................................................................12

10 Joystick ....................................................................................................................................13

Company Confidential

Page 4of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

1 C65 board layout

Jigs, Tools and Working materials for all described repairs:

- hot air blower

- soldering gun

- tweezers

- flux

- solder

Joystick SW

Diode

IRDA

Connector

SIM CARD READER

Connector

IO JACK

Connector

BOARD TO BOARD

Connector

BATTERY

Connector

Board to Board

Connector

Display

Company Confidential

Page 5of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

2 Connector SIM Card Reader

Fault Symptoms

Customer: GRT:

Handset does not accept SIM card SIM Card Problems

Connector SIM Card Reader

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C335

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 43300 Interface/SIM Cardreader/Mechanical Damage

SIM Card Problems

Check the status of the

SIM card reader visually

okay

not okay

Level 2 Repair

SCRAP don´t

send back to WSC

Exchange

SIM Card reader

- check for twisted or

bended contacts

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

not okay

okay

not okay

Watch for oxidation and

damaged pads of the SIM

card reader

Company Confidential

Page 6of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

3 Connector IO Jack

Fault Symptoms

Customer: GRT:

Charging Problems No connection to GRT

Problems with external loudspeaker or microphone when using a car kit Tbd.

Problems with accessories connected at the IO connector

Connector IO Jack

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z93-C303

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 46100 Interface/Charging Connector/Mechanical Damage

47300 Interface/Data Interface/Mechanical Damage

4B100 Interface/Headset Connector/Mechanical Damage

IO connector Problems

Exchange

IO connector

not okay

okay

Check the status of the

IO connector visually

okay

not okay

Level 2 Repair

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

okay

not okay

Watch for oxidation and

damaged pads of the

IO connector

- check for twisted or

bended contacts

- check for dry joints

Clean

IO connector

not okay

okay

Check for dust inside

the IO connector

SCRAP don´t

send back to WSC

Company Confidential

Page 7of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

4 Connector Board to Board

Fault Symptoms

Customer: GRT:

Keyboard malfunction Keyboard malfunction

Keypad illumination does not work Tbd.

Connector Board to Board

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C162

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 32100 Keys / Main / No Function

32200 Keys / Main / Reduced Functionality

36000 Keys / Illumination

B to B connector Problems

Check the status of the

BtoB connector visually

okay

not okay

Level 2 Repair

Exchange

BtoB connector

- check for twisted or

bended contacts

- check for dry joints

not okay

okay

Watch for oxidation and

damaged pads of the BtoB

connector

SCRAP don´t

send back to WSC

Company Confidential

Page 8of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

5 Connector Battery

Fault Symptoms

Customer: GRT:

Mobile does not switch on No connection to GRT

Connector BATTERY

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C336

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 13000 Battery/Mechanical Damage

Battery connector

Problems

Check the status of the

battery connector visually

okay

not okay

Level 2 Repair

Exchange

Battery connector

- check for twisted or

bended contacts

- check for dry joints

not okay

okay

not okay

Watch for oxidation and

damaged pads of the battery

connector

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

SCRAP don´t

send back to WSC

Company Confidential

Page 9of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

6 IRDA Diode

Fault Symptoms

Customer: GRT:

IRDA does not work Tbd.

Irda Diode

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36197-F5008-F492

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 41100 Interfaces / IRDA / No Function

41300 Interfaces / IRDA / Mechanical Damage

IRDA Problems

Check the status of the

IRDA Diode visually

okay

not okay

Level 2 Repair

Exchange

IRDA Diode

not okay

okay

Watch for oxidation and

damaged pads of the IRDA

Diode

- check for dry joints

SCRAP don´t

send back to WSC

Company Confidential

Page 10 of 13

Service Repair Documentation

Level 2.5 - C65 Release 1.0

7 Connector Display

Fault Symptoms

Customer: GRT:

Display problems, like missing lines or columns on

the LCD or display contrast problems or illumination

problems

Display Problems

Connector Dispaly

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C205

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 21000 Display / Performance

22000 Display / Background Illumination

Display Problems

Check the status of the

Display connector visually

okay

not okay

Level 2 Repair

Exchange

Display connecter

- check for twisted or

bended contacts

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

not okay

okay

not okay

Watch for oxidation and

damaged pads of the

Display connector

SCRAP don´t

send back to WSC

Altri manuali per C65

Indice

Altri manuali Siemens Telefono cellulare

Siemens

Siemens A70 Guida all'installazione

Siemens

Siemens S66 Manuale utente

Siemens

Siemens SOMATOM Sensation Cardiac Version A60 Manuale utente

Siemens

Siemens Gigaset S56 Manuale utente

Siemens

Siemens Gigaset Powerline Adapter 200 Manuale utente

Siemens

Siemens Emoty Manuale utente

Siemens

Siemens SL42 Manuale utente

Siemens

Siemens MC60 Manuale utente

Siemens

Siemens AP75 Manuale utente

Siemens

Siemens A35 Manuale utente

Siemens

Siemens SL45i Manuale utente

Siemens

Siemens ME 45 Manuale utente

Siemens

Siemens C55 Manuale utente

Siemens

Siemens Gigaset S56 Manuale utente

Siemens

Siemens SL65 Manuale utente

Siemens

Siemens M46 Manuale utente

Siemens

Siemens CL50 Manuale utente

Siemens

Siemens C66 Manuale utente

Siemens

Siemens SL10 Manuale dell'operatore

Siemens

Siemens CFX65 Manuale utente

Siemens

Siemens C55/2128 Manuale utente

Siemens

Siemens C62 Manuale utente

Siemens

Siemens Gigaset S2 HiPath 4000 Manuale utente

Siemens

Siemens SL42 Manuale utente

Manuali Telefono cellulare popolari di altre marche

Zte

Zte BLADE A520 Manuale utente

Nokia

Nokia Lumia 620 Manuale utente

Blackbe;rry

Blackbe;rry KEYone Manuale utente

Bea-fon

Bea-fon X5 Premium Manuale utente

Blackbe;rry

Blackbe;rry 8707 Series Manuale utente

Blackbe;rry

Blackbe;rry Storm Istruzioni operative

LG LM-X420QN Manuale utente

LifeWatch

LifeWatch V Manuale utente

Bea-fon

Bea-fon SILVER LINE SL860 Manuale utente

IKI Mobile

IKI Mobile KF4.5i Manuale utente

Hitech

Hitech HT-850 Manuale utente

Yezz

Yezz Fashion F10 Manuale utente

Point Mobile

Point Mobile PM60 Manuale utente

Blackbe;rry

Blackbe;rry Q10 Manuale utente

Blackbe;rry

Blackbe;rry Bold 9900 Manuale utente

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuale utente

LG LM-K420EMW Manuale utente

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuale utente