Siemens PXC Modular Series Manuale utente

Installation Instructions

Document No. 565-411

April 2, 2014

Modbus Driver for PXC-Modular and PXC-36

Siemens Industry, Inc.

565-411

These installation instructions cover the connection of

the Modbus and Modbus 250/500/1000 Driver to the

vendor's Modbus system only.

For hardware installation of the PXC Modular, see

the

PXC Modular Series Installation Instructions

(553-638).

For hardware installation of the PXC-36, see the

PXC Compact 36 Installation Instructions

(553-

504).

Product Description

The Modbus and Modbus 250/500/1000 Driver

enables communication between the APOGEE®

Automation System and the Modbus system.

Product Numbers

PXC Modular

PXC00-PE96.A

PXC Modular, Ethernet or RS-485

ALN, 96 FLN nodes

PXC00-E96.A

PXC Modular, BACnet/IP or MS/TP

ALN, 96 FLN nodes

PXC100-PE96.A

PXC Modular, Ethernet or RS-485

ALN, 96 FLN nodes, TX-I/O module

support

PXC100-E96.A

PXC Modular, BACnet/IP or MS/TP

ALN, 96 FLN nodes, TX-I/O module

support

PXX-485.3

Expansion Module, three RS-485

FLN connections

PXC-36

PXC36-PE.A

PXC Compact, 36 point, Ethernet/IP

or RS-485 ALN

PXC36-E.A

PXC Compact, 36 point, BACnet/IP

or MS/TP ALN

PXC36-PEF.A

PXC Compact, 36 point, Ethernet/IP

or RS-485 ALN. Includes licenses

for TX-I/O module and P1 FLN

support.

PXC36-EF.A

PXC Compact, 36 point, BACnet/IP

or MS/TP ALN. Includes licenses

for TX-I/O module and P1 FLN

support.

Licenses

LSM-INT-MDBS

License for Modbus Driver on PXC

Modular or PXC-36

LSM-INT-

MDBS1000

License for Modbus 1000 Driver on

PXC Modular or PXC-36

LSM-INT-

MDBS500

License for Modbus 500 Driver on

PXC Modular or PXC-36

LSM-INT-

MDBS250

License for Modbus 250 Driver on

PXC Modular or PXC-36

Accessories

538-670

Trunk Interface II, 115V

538-675

Trunk Interface II, 230V

538-755

Trunk/RS-422 Interface (115V

Power)

538-760

Trunk/RS-422 Interface (230V

Power)

536-004

RS-232 Cable

Caution Notation

CAUTION

Equipment damage or loss of data

may occur if you do not follow a

procedure as specified.

Expected Installation Time

The expected installation time is 7 minutes if no cable

must be made and the driver does not use a Trunk

Interface (see Figure 2), or 30 minutes if a cable must

be made or if the driver uses a Trunk Interface (see

Figure 1 and Figure 2).

Required Tools and Materials

Flat-blade screwdriver (1/8-inch blade width).

Wire strippers.

Cabling and connectors. See the

Connecting the

Driver to the Vendor's Modbus Master or Modbus

Slave Devices

section.

Document No. 565-411

Installation Instructions

April 2, 2014

Siemens Industry, Inc.

565-411

CAUTION

Always wear an electro-static

discharge (ESD) wrist strap and

discharge accumulated static before

touching field panel components.

Prerequisites

Driver hardware is installed according to its

respective installation instructions.

FLN Termination blocks installed, if any.

One AC power receptacle for each

communication interface adapter or device.

Depending on the type of installation, other

prerequisites may have to be completed.

Connecting the Driver to the

Vendor's Modbus Master or

Modbus Slave Devices

Follow these steps to connect the Modbus and

Modbus 250/500/1000 Driver to Modbus devices:

1. Make cables per the diagram in Figure 1,

Figure 2, or Figure 3.

2. If applicable, install the Trunk/RS-422 or Trunk

Interface II per the diagram in Figure 1 or

Figure 2.

3. Connect cables per the diagram in Figure 1,

Figure 2, or Figure 3.

4. If applicable, plug in the power supply for the

Trunk/RS-422 or Trunk Interface II per the

diagram in Figure 1 or Figure 2.

NOTE:

For Modbus over Ethernet, use IEEE

802.3 standard Ethernet connections

and cabling to complete your network

infrastructure.

Figure 1: Using a Trunk/RS-422 Interface to Connect the

Driver to the Vendor’s Modbus Master or Modbus Slave

Device.

Document No. 565-411

Installation Instructions

April 2, 2014

Siemens Industry, Inc.

565-411

Figure 2: Using a Trunk Interface II to Connect the Driver to the Vendor’s Modbus Master or

Modbus Slave Device.

Document No. 565-411

Installation Instructions

April 2, 2014

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as

design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company

Siemens Industry, Inc.

Building Technologies Division

1000 Deerfield Parkway

Buffalo Grove, IL 60089-4513

USA

Tel. 1 + 847-215-1000

Your feedback is important to us. If you have

comments about this document, please send them

to SBT_technical.editor.us.sbt@siemens.com.

Document No. 565-411

Printed in the USA

Page 4 of 4

Figure 3: Directly Connecting the Modbus Driver to the Vendor's Modbus Master or Modbus

Slave Device.

Questo manuale è adatto per i seguenti modelli

Altri manuali Siemens Controllori

Siemens

Siemens SKP25 Series Manuale del proprietario

Siemens

Siemens SIMATIC S5-100U Manuale utente

Siemens

Siemens Simatic S7-300 Manuale utente

Siemens

Siemens SINAMICS S120 Documento tecnico

Siemens

Siemens Simatic S7-300 Manuale utente

Siemens

Siemens Simatic S7-1500 Manuale utente

Siemens

Siemens SIRIUS 3RW44 2 Series Manuale utente

Siemens

Siemens 5WG1 513-1AB11 Manuale utente

Siemens

Siemens 540-103 Manuale utente

Siemens

Siemens Reyrolle 7SR45 Manuale utente

Siemens

Siemens Simatic S7-1500R Guida utente

Siemens

Siemens SIMATIC S7-200 Manuale utente

Siemens

Siemens North American Electric 3RW30-40 Series Manuale utente

Siemens

Siemens SIMATIC S5-115F Manuale utente

Siemens

Siemens SPC3 Guida

Siemens

Siemens 3RK1308-0 00-0CP0 Series Documento tecnico

Siemens

Siemens SITRANS LUT400 Manuale utente

Siemens

Siemens LFL1.133 Manuale utente

Siemens

Siemens OpenAir GLB Series Manuale utente

Siemens

Siemens SINAMICS SL150 6SL38655UM427AA02 Manuale utente

Siemens

Siemens SINAMICS S120 Guida rapida

Siemens

Siemens SIMATIC S7 Guida utente

Siemens

Siemens OpenAir G B181.1E/KN Series Manuale utente

Siemens

Siemens SITOP UPS1600 under STEP 7 V12 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

3M MicroTouch EX113 Manuale utente