Siemens WS 720 A Manuale utente

Equipment for Machine Tools

WS 720 A

Single axis controller

User’sGuide Edition 10.93

COM 720 description

Siemens Automation Parts

WS 720 A

Single axis controller

Catalogue Index of Manuals Product brief Description

SIEMENS

WS 720 A

SIEMENS

WS 720 A

SIEMENS

Index of Manuals

SIEMENS

General Documentation

Planning Manual Hardware

User and Service-Documentation (for details see inside back cover)

Description PG-Manual

SIEMENS

Additional Documentation

Application Manual User´s Guide for

OP 720

COM 720

SIEMENS

SIMATIC S5

Single Axis Controller

SIEMENS

WS 720 A

SIEMENS

WS 720 A

SIEMENS

Ausrüstungen für Bearbeitungsmaschinen

WS 720

Einachssteuerung

SIEMENS

WS 720 A

SIEMENS

WS 720 A

Reference Book, Lists

SIEMENS

Electro-Magnetic Guidelines

for WF/WS-Technology

Electro-Magnetic Guidelines

Equipment for Special Machines

Glossary of terms

(available only in German)

Equipment for Special Machines

Equipment for Special Machines Equipment for Special Machines Equipment for Special Machines

Equipment for Special Machines

Equipment for Special Machines Equipment for Special Machines

Single Axis Controller

Single Axis Controller Single Axis Controller

Edition October 1993

Equipment for

Machine Tools

WS 720 A

Single axis controller

User’s Guide

for COM 720

Forward 1

Function overview 2

Layout and Installation 3

Working with the software 4

Menu functions 5

Hints when using Windows 6

Appendix 7

Siemens Automation Parts

Note

For the sake of clarity this document does not go into all possible situations which may

arise with this product. The document cannot deal with every situation which may arise

during commissioning, operation and maintenance.

If you need special information or have special questions, you should contact your

Siemens representative.

This document is not part of an earlier or existing agreement, promise or right. All

obligations of Siemens are limited to those in the sale contract, which also contains all the

details of the guarantee. The guarantee in the sale contract is not affected by anything in

this document.

BERO, SIMATIC, SIMODRIVE, SINEC, SINUMERIK, STEP are all registered trademarks of Siemens

Aktiengesellschaft.

The other terms used in this manual may also be trademarks, whose use by third parties may infringe upon the

rights of the owners of those trademarks

This publication was produced with Microsoft Word 2.0b 

Subject to technical changes.

The reproduction, transmission or use of this document or of its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

supplied by patent grant or registration of a utility model or

design, are reserved.

10.99 Appendix

Contents Page

1 Forward..................................................................................1-1

2 Function overview.................................................................2-1

3 Layout and Installation.........................................................3-1

3.1 Hardware and software overview............................................................. 3-1

3.2 Hardware- and Software configuration ....................................................3-2

3.3 Installing the COM 720 software..............................................................3-2

3.4 Installation of SYSDOK 720.....................................................................3-2

4 Working with the software....................................................4-1

4.1 Starting display........................................................................................4-1

4.2 The machine file ......................................................................................4-2

4.3 Selection of data type..............................................................................4-3

4.4 Machine data...........................................................................................4-4

4.5 Part Programs..........................................................................................4-5

4.6 Commissioning display............................................................................4-6

4.7 Transfer ...................................................................................................4-7

4.8 Technical documentation (SYSDOK 720)................................................4-8

5 Menu functions......................................................................5-1

6 Hints when using Windows..................................................6-1

7 Appendix................................................................................7-1

7.1 Abbreviations...........................................................................................7-1

7.2 Index........................................................................................................7-3

Siemens Automation Parts

10.99 Forward

WS 720 A (BN - COM 720 description)

1 Forward

What information is to be

found in this manual? This pocket guide describes the installation and use of the COM

720 software. The hardware and software requirements are

specified. Some masks are explained with examples.

For whom is this manual

intended? The guide is intended for machine design engineers and for

service specialists.

Each group, engineers and specialists must be qualified as

outlined on page 1-2.

What prior knowledge is

needed? It is assumed that the user of this guide is familiar with general

machine safety guidelines and particular safety requirements of

the country where the machine is to be used.

Familiarity with Windows and with the modules WS721/WS720

are needed to be able to use the COM 720 software.

Finding your way about the

manual?The manual is divided up into the sections:

Overview

Installation

Operation

The guide is complemented by a function overview, hints to

using Windows, and lists of the functions in the menus and of

the pushbuttons.

Forward 10.99

WS 720 A (BN - COM 720description)

Definitions and terminology

Qualified personnel People who are experienced in setting up, optimising and

operating machines and whose qualifications are

commensurate with the an activity, for example:

Training and authorisation to switch power to electrical

circuits and equipment according to the recognised

standards, to earth such equipment and the mark up the

cables on such equipment

Training in the maintenance of safety devices according to

the recognised standards.

First aid training.

Danger

Loss of life, severe personal injurity or substantial damage to

property will result if proper precautions are not taken.

Warning

Loss of life, severe personal injurity or substantial damage to

property can result if proper precautions are not taken.

Caution

Minor personal injurity or property damage can result if proper

precautions are not taken.

☞This symbol draws attention to important information about the

product or a particular part of the operating instructions.

This type of frame contains a reference to another manual.

Siemens Automation Parts

10.99 Function overview

WS 720 A (BN - COM 720 description)

2 Function overview

Area of application Ease of programmimg is very important with today’s machines

and COM 720 provides you with an NC editor. Sets of data can

be conveneintly generated, duplicated and modified.

The COM 720 software offers:

−menu driven Windows operation

−ability to add comments to programs,

−Help screen in case of operator errors,

−info system to offer concise programming tips,

−print out facility for the WS data,

−comments window,

−central data storage,

−ON or OFF line operation,

−SYSDOK 720 (WS720 documentation integrated into

software).

Structure All the data of the WS cards used in a particular SIMATIC S5

system can be grouped together in a machine specific file with

the COM 720 software.

The data structure makes it possible to organise the machine

data, part programs and control configuration. The WS data for

the WS721/WS720 can be stored either on the hard disc of the

PG/PC or on floppy.

COM 720 is also very useful during commissioning, where it can

be used to view status of signals and axis positions.

With the COM 720 software it is possible to see which data files

are present.

Operation The COM 720 software uses the window structure. The user is

guided by messages into the desired window.

Programming An NC editor can be used to enter the part programs.

The editor is not only a means of entering the part programs, but

it also carries out a check to see that the entered values are

within tolerance.

Comments can also be inserted with the part program, as an aid

to understanding the program. Each program block can have a

comment line upto 65 characters in length.

Using COM 720 it is also possible to issue the data for MDI

mode. Teach-in is also possible with the COM 720.

Function overview 10.99

WS 720 A (BN - COM 720 description)

Help system The help system is based on the SYSDOK 720, which is an

integral part of the software. SYSDOK 720 is the Application

Manual of the WS720 not in a book form, but in the software. It

can be called up the screen just like the paper manual can be

opened up.

With few keystrokes you can obtain information relevant to a

given problem, which makes the software very attractive for

newcomers to the WS system. On the one hand there are the

familiar index and contents table of the paper documentation, on

the other there are the electronic search methods for cross

referencing related subjects and other explanations.

There is a key word index to help you in your search. When a

key word is selected, SYSDOK 720 brings up a list of all the

masks which deal with that subject. The selected mask can be

displayed. The work is further facilitated by means of the

electronic book mark and note pad.

SYSDOK 720 is also available as a separate product.

Siemens Automation Parts

10.99 Layout and Installation

WS 720 A (BN - COM 720 description)

3 Layout and Installation

3.1 Hardware and software overview

PG 730/PG 750/PG 770/PC

COM 720

additional

possibility

digital

inputs/outputs

Relay

control

PLC

Indice

Altri manuali Siemens Controllori

Siemens

Siemens OpenAir G B181.1E/KN Series Manuale utente

Siemens

Siemens ACVATIX SQV..P Series Manuale utente

Siemens

Siemens simovert masterdrives Manuale utente

Siemens

Siemens RAJA+ 3TE7121-1HC14-1A Series Guida

Siemens

Siemens HiPath C10 Manuale utente

Siemens

Siemens SSC31 Manuale utente

Siemens

Siemens GEB 1 Series Manuale utente

Siemens

Siemens GHT336.1A/35 Manuale utente

Siemens

Siemens BR6000 Manuale utente

Siemens

Siemens SIMATIC S7-200 Guida utente

Siemens

Siemens SIMOTION P350-3 Manuale utente

Siemens

Siemens OpenAir GDE131.1U Manuale utente

Siemens

Siemens RRV851 Manuale utente

Siemens

Siemens SINUMERIK 828D Turning Guida rapida

Siemens

Siemens SIMOVERT MASTERDRIVES MC Series Manuale utente

Siemens

Siemens SSA911.01TH Manuale utente

Siemens

Siemens Desigo RXC32.1 Manuale utente

Siemens

Siemens RWD44U Manuale utente

Siemens

Siemens LOGO! PROM Manuale utente

Siemens

Siemens SIRIUS M200D Manuale utente

Siemens

Siemens GED33 Series Manuale utente

Siemens

Siemens RDE-MZ6 Manuale utente

Siemens

Siemens SIMATIC TP700 Comfort Outdoor Guida per l'amministratore

Siemens

Siemens SIRIUS S00 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

3M MicroTouch EX113 Manuale utente