Siemens SINAMICS S120 Documento tecnico

Equipment Manual 04/2004 Edition

SINAMICS S120

Booksize Power Sections

Preface

System Overview

Line Connection Booksize

Line Modules Booksize

Motor Modules Booksize

DC Link Components

Booksize

Cabinet Configuration and

EMC Booksize

Service and Support

Booksize

Appendix A

Appendix B

SINAMICS

SINAMICS S120

Booksize Power Sections

Equipment Manual

(GH2), 04.2004 Edition

SINAMICS® Documentation

Printing history

Brief details of this edition and previous editions are listed below.

The status of each edition is shown by the code in the "Remarks" column.

Status code in the "Remarks" column:

A New documentation

B Unrevised reprint with new order no.

C Revised edition with new status

If factual changes have been made on the page in relation to the same software version, this is indicated by a new edition

coding in the header on that page.

Edition Order No. Remarks

04.04 6SL3097-2AC00-0BP0 A

Trademarks

SIMOVERT®, SIMATIC®, SIMATIC HMI®, SIMATIC NET®, SIMOTION®, SINUMERIK® and SINAMICS® are trademarks of

Siemens. Other product names used in this documentation may be trademarks which, if used by third parties, could infringe the

rights of their owners.

Further information is available on the Internet under:

http://www.siemens.com/motioncontrol

This publication was produced with SIPS+

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for

damages. All rights, including those created by patent grant or registration of a

utility model or design, are reserved.

We have checked that the contents of this document correspond to the hardware

and software described. Nonetheless, differences might exist and therefore we

cannot guarantee that they are completely identical. The information contained in

this document is, however, reviewed regularly and any necessary changes will

be included in the next edition. We welcome suggestions for improvement.

Subject to changes without prior notice

Order No. 6SL3097-2AC00-0BP0

Printed in Germany

Siemens Aktiengesellschaft

Booksize Power Sections

Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0 iii

Preface

Information on the SINAMICS S documentation

The SINAMICS S documentation is divided into the following areas:

• General documentation/catalogs

• Manufacturer/service documentation

• Electronic documentation

This documentation is an integral part of the manufacturer/service documentation developed

for SINAMICS. All documents can be obtained separately.

You can obtain detailed information about the documents named in the documentation

overview and other documents available for SINAMICS from your local Siemens office.

For the sake of simplicity, this documentation does not contain all detailed information about

all types of the product and cannot cover every conceivable case of installation, operation, or

maintenance.

The contents of this documentation are not part of an earlier or existing agreement, a

promise, or a legal agreement, nor do they change this. All obligations entered into by

Siemens result from the respective contract of sale that contains the complete and sole valid

warranty arrangements. These contractual warranty provisions are neither extended nor

curbed as a result of the statements made in this documentation.

Audience

This documentation is aimed at machine and plant builders, commissioning engineers, and

service personnel who use SINAMICS.

Objective

This manual describes the hardware components of the SINAMICS S system. It provides

information about installation, electrical connection, and cabinet design.

Preface

Booksize Power Sections

iv Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0

Danger and warning notices – symbol explanations

The following danger and warning notices are used in this document:

Danger

Indicates an imminently hazardous situation which, if not avoided, will result in death, serious

injury, or substantial damage to property.

Warning

Indicates an potentially hazardous situation which, if not avoided, could result in death, or

serious injury, or substantial property damage.

Caution

Used with the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury or property damage.

Caution

Used without safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Notice

Used without the safety alert symbol indicates a potential situation which, if not avoided, may

result in an undesirable result or state.

Note

This notice indicates that there are further issues to be taken into consideration.

Preface

Booksize Power Sections

Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0 v

Definition: Qualified personnel

With reference to this manual and the warning labels on the product, a "qualified person" is

someone who is familiar with the installation, mounting, startup, and operation of the

equipment and who has certified qualifications for the type of responsibility involved, such

as:

• Training and instruction, i.e. authority to switch on and off, to earth and to label circuits

and equipment according to safety regulations.

• Training and instruction in maintenance and use of adequate safety equipment according

to safety regulations.

• First aid training.

Finding information

To help you find information more easily, the following sections have been included in the

appendix in addition to the table of contents:

1. References

2. Index

Preface

Booksize Power Sections

vi Equipment Manual, (GH2), 04.2004 Edition, 6SL3097-2AC00-0BP0

Technical information

Hotline

If you have any further questions, please call our hotline:

A&D Technical Support

Tel.: +49 (0) 180 5050 - 222

Fax: +49 (0) 180 5050 - 223

E-mail: [email protected]

Please send any questions about the documentation (suggestions for improvement,

corrections, and so on) to the following fax number or e-mail address:

Fax: +49 (0) 9131 98 - 2176

Fax form: See feedback page at the end of this publication

Email: [email protected]

Internet address

Up-to-date information about our products can be found on the Internet at the following

address:

http://www.siemens.com/motioncontrol

Altri manuali per SINAMICS S120

Indice

Altri manuali Siemens Elettricità industriale

Siemens

Siemens 3VA9588-0VM10 Manuale utente

Siemens

Siemens SIVACON 8PS Manuale utente

Siemens

Siemens 3VA9111-0WJ 0 Series Manuale utente

Siemens

Siemens 8PQ9800-0AA55 Manuale utente

Siemens

Siemens simovert masterdrives Manuale utente

Siemens

Siemens 5WG1 120-1AB02 Manuale di servizio

Siemens

Siemens MICROMASTER 440 Istruzioni operative e di manutenzione

Siemens

Siemens CLM0C Istruzioni per il montaggio

Siemens

Siemens SIRIUS 3RT1.3 Manuale utente

Siemens

Siemens SIRIUS 8WD44 Manuale utente

Siemens

Siemens 3VM1 Series Manuale utente

Siemens

Siemens 3WN1 Manuale utente

Siemens

Siemens SG-3118 Manuale del proprietario

Siemens

Siemens 7XR61 Series Manuale

Siemens

Siemens 3VA921-0JC22 Series Manuale utente

Siemens

Siemens 3VA9988-0BM10 Manuale utente

Siemens

Siemens 7XR6004 Series Manuale

Siemens

Siemens Simatic S7-1500 Documento tecnico

Siemens

Siemens 3VA9088-0VM30 Manuale utente

Siemens

Siemens 3VA9157-0PK11 Manuale utente

Siemens

Siemens E87010-A0104-T003-A6-CLM0 Istruzioni per il montaggio

Siemens

Siemens SIRIUS 3RA232 8 Series Manuale utente

Siemens

Siemens RHVE6 Manuale utente

Siemens

Siemens 3RT1955-5A/N Series Manuale utente

Manuali Elettricità industriale popolari di altre marche

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Manuale tecnico

Abtech

Abtech HVJB Series Guida

Murata

Murata GRM0335C1H8R1DA01 Series Manuale utente

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Manuale utente

Eaton

Eaton Ulusoy HMH24-04 Manuale utente

Newlong

Newlong NP-7H Manuale utente

Murata

Murata GJM0335C1E4R4BB01 Series Manuale utente

Stahl

Stahl 8575/12 Manuale utente

SI Pegasus Manuale utente

Murata

Murata GRM1555C1H2R7CA01 Seies Manuale utente

Murata

Murata GRM0225C1E6R4BA03 Series Manuale utente

Cooper Power Systems

Cooper Power Systems VXE15 Manuale utente

S&C

S&C Vista SD Manuale utente

Murata

Murata GRM0335C2A7R3CA01 Series Manuale utente

Murata

Murata GRM32ER60G227ME05 Series Manuale utente

Rockwell Automation

Rockwell Automation Allen-Bradley MP-Series Manuale utente

Phasemation

Phasemation DG-100 Manuale utente

Murata

Murata GRM219R61C225KA88 Series Manuale utente