SIGMA TEK ETV 0833-3 Manuale utente
ETV 0833-3
Control Panel
Operating Manual
Date of creation: 10.06.2015
Version date: 26.11.2018
Article number: 13-230-0833-3E
Publisher: SIGMATEK GmbH & Co KG
A-5112 Lamprechtshausen
Tel.: +43/6274/4321
Fax : +43/6274/4321-18
WWW.SIGMATEK-AUTOMATION.COM
Copyright © 2015
SIGMATEK GmbH & Co KG
Translation from German
All rights reserved. No part of this work may be reproduced, edited using an electronic system, duplicated or dis-
tributed in any form (print, photocopy, microfilm or in any other process) without the express permission.
We reserve the right to make changes in the content without notice. The SIGMATEK GmbH & Co KG is not responsi-
ble for technical or printing errors in the handbook and assumes no responsibility for damages that occur through
use of this handbook.
CONTROL PANEL ETV 0833-3
26.11.2018 Page 1
CONTROL PANEL ETV 0833-3
The control panel is an intelligent terminal for programming and visualization of automated
processes. Process diagnostics as well as operating and monitoring automated procedures
are simplified using this control panel.
A touch screen serves as the input medium for process data and parameters. The output is
shown on an 8.4" SVGA TFT color display.
With the LSE mask editor, graphics can be created on the PC, then stored and displayed
on the control panel.
The available interfaces can be used to exchange process data or configure the control
panel. A microSD card serves as the storage medium for the operating system, application
and application data.
The integrated, high-performance VARAN bus can be used to control I/O modules directly.
ETV 0833-3 CONTROL PANEL
Page 2 26.11.2018
Contents
1Technical Data ........................................................................ 4
1.1 Performance Data.........................................................................4
1.2 Electrical Requirements...............................................................5
1.3 Terminal.........................................................................................5
1.4 Environmental Conditions...........................................................5
1.5 Display...........................................................................................6
1.6 Control Unit...................................................................................7
1.7 Digital Outputs..............................................................................8
1.8 Digital Inputs.................................................................................8
1.9 Miscellaneous ...............................................................................9
2Mechanical Dimensions........................................................10
3Connector Layout..................................................................11
3.1 Backside......................................................................................11
3.2 Applicable Connectors...............................................................15
4Buffer Battery.........................................................................16
5BIOS........................................................................................19
6Cooling ...................................................................................19
7Mounting Instructions...........................................................19
8Wiring Guidelines ..................................................................20
CONTROL PANEL ETV 0833-3
26.11.2018 Page 3
8.1 Ground.........................................................................................20
8.2 Shielding......................................................................................20
8.3 ESD Protection............................................................................20
8.4 USB Interface Connections .......................................................20
9CAN Bus Setup......................................................................21
9.1 CAN Bus Station Number ..........................................................21
9.2 Number of CAN Bus Participants..............................................21
9.3 CAN Bus Data Transfer Rate .....................................................21
10 CAN Bus Termination ...........................................................22
11 Process Diagram...................................................................23
12 Status and Error Messages..................................................24
13 Recommended Shielding for VARAN..................................32
13.1 Wiring from the Control Cabinet to an External VARAN
component...................................................................................33
13.2 Wiring Outside of the Control Cabinet .....................................34
13.3 Shielding for Wiring Within the Control Cabinet .....................35
13.4 Connecting Noise Generating Components............................36
13.5 Shielding Between Two Control Cabinets ...............................37
14 Cleaning the Touch Screen..................................................38
15 Disposal .................................................................................39
ETV 0833-3 CONTROL PANEL
Page 4 26.11.2018
1 Technical Data
1.1 Performance Data
Processor
EDGE2 Technology
Internal cache
32-kbyte L1 Instruction Cache
32-kbyte L1 Data Cache
512-kbyte L2 Cache
Internal program and data memory
(DDR3 RAM)
512-Mbyte
Internal remnant data memory
512-kbyte SRAM (battery buffered)
Internal storage device
1-Gbyte microSD card
Internal I/O
yes
Interfaces
1x USB 2.0 Type A
1x USB 1.1, type Mini B
1x Ethernet
1x VARAN bus (maximum cable length: 100 m)
1x CAN bus (not galvanically separated)
Internal interface connections and
devices
1x TFT LCD color display
1x USB (touch connection)
Display
Resolution
8.4" TFT color display
800 x 600 Pixel
Control panel
Touch screen (projective capacitive)
Signal generator
no
Status LEDs
no
Real-time clock
yes (battery buffered)
Cooling
passive (fanless)
CONTROL PANEL ETV 0833-3
26.11.2018 Page 5
1.2 Electrical Requirements
Supply voltage
typically +24 V DC (+18-30 V DC)
Current consumption of power
supply at +24 V
typically 350 mA
(without externally connected devices)
maximum 400 mA
(with externally connected devices)
Inrush current
maximal 2 A for 10 s
UL standard
for UL(1) : must be supplied with SELV / PELV and Limited Energy
Digital output also is SELV / Limited Energy.
(1) In US according to Class 2 UL 1310 or UL 61010-1, 3rd edition, chapter 9.4 or LPS (limited power supply)
UL 60950-1 or Limited Energy UL 1585
1.3 Terminal
Dimensions
220 x 172 x 40.7 mm (W x H x D)
Material
front plate: 4 mm aluminum, black anodized
Weight
typically 1.15 kg
1.4 Environmental Conditions
Storage temperature
-10 ... +85 °C
Environmental temperature
0 … 50 °C
Humidity
10-90 %, non-condensing
Operating conditions
Pollution degree 2
Indoor use
altitude up to 2000 m
EMC stability
EN 61000-6-2: noise immunity
EN 61000-6-4: noise emission
Vibration resistance
EN 60068-2-6
2-9 Hz: amplitude 3.5 mm
9-200 Hz: 1 g (10 m/s²)
Shock resistance
EN 60068-2-27
15 g (150 m/s²)
duration 11 ms, 18 shocks
Protection type
EN 60529
protected through the housing
front: IP65 (no UL-rating)
cover: IP20 (no UL-rating)
ETV 0833-3 CONTROL PANEL
Page 6 26.11.2018
1.5 Display
Type
8.4” TFT LCD color display
Resolution
SVGA 800 x 600 Pixel
Color depth
24-bit RGB (16M colors)
LCD mode
TN/Normal white1)
LCD Polarizer
transmissive2)
Pixel size
0.213 x 0.213 mm
Active surface
170.40 x 127.80 mm
Backlighting
LED
Contrast
typically 600
Brightness
typically 380 cd/m²
Angle CR ≥ 10
left and right 75°, above 60°, below 70°
Life span
By compliance with the ambient conditions, the brightness of the display
sinks after 20,000 operating hours to 50 % of the original brightness.
Due to the manufacturing process, individual pixel errors cannot be excluded to 100 % and therefore do not constitute
a reduction in quality.
1) If there is no display data, the display is white (LED backlight on).
2) Display technology, with which display backlighting is used.
3) The viewing angle is measured from the normal to the display surface.
CONTROL PANEL ETV 0833-3
26.11.2018 Page 7
1.6 Control Unit
Operating field
Touch screen (multi-touch, projective capacitive)
Maximum number of fingers
10
The operation with thin gloves
yes
SIGMATEK Touch pen (passive)
yes
Handwriting recognition
no
Ball of the thumb recognition
no
Water spray recognition 1)
no
Water detection 2)
no
Reinigung
see chapter 14 Cleaning and Disinfecting the Touch Screen
The device must always be grounded or with cable-connected devices, the
mass must be connected correctly to ensure stable function of the touch
screen. The touch function may still have to be individually adapted to the
respective environmental conditions.
1) Detects individual water droplets on the touch screen and remains operable.
2) Detects a large amount of water on the touch screen and deactivates it.
ETV 0833-3 CONTROL PANEL
Page 8 26.11.2018
1.7 Digital Outputs
Number
8
Short-circuit proof
yes
Maximum continuous
current load allowed per
channel
0,5 A
Maximum total current
(all 8-channels)
2 A (100 % of on time)
Voltage drop over power
supply (output active)
1 V
Residual current
(off)
12 µA
Turn-on delay
< 400 s
Turn-off delay
< 400 s
Max. braking energy of
inductive loads
1 channel 0.12 [Joules]
1.8 Digital Inputs
Number
8
Input voltage
typically +24 V
maximum +30 V
Signal level
low: < +4.5 V
high: > +14 V
Switching threshold
typically +11 V
Input current
typically 5 mA at + 24 V
Input delay
typically 5 ms
Indice
Altri manuali SIGMA TEK Pannello di controllo
SIGMA TEK
SIGMA TEK HGT 835 Manuale utente
SIGMA TEK
SIGMA TEK HGW 1033 Manuale utente
SIGMA TEK
SIGMA TEK ETV 0853-3 Manuale utente
SIGMA TEK
SIGMA TEK HGT 1053 Manuale utente
SIGMA TEK
SIGMA TEK HGT 1051 Manuale utente
SIGMA TEK
SIGMA TEK HZS 774 Manuale utente
SIGMA TEK
SIGMA TEK 1U619-001 Manuale utente
SIGMA TEK
SIGMA TEK ETV 1591-H Manuale utente
SIGMA TEK
SIGMA TEK HBG 1011 Manuale utente
SIGMA TEK
SIGMA TEK HGW 1033-3 Manuale utente
