Signotec Delta Manuale utente

Version 2.1 as of 13.01.2021 www.signotec.com

signotec Delta (Touch) Pen Display

User Manual

Contents

THANK YOU! ................................................................................................................................................................... 3

SYMBOLS ........................................................................................................................................................................ 3

WARNINGS AND PRECAUTIONS ..................................................................................................................................... 4

OTHER RESOURCES ......................................................................................................................................................... 4

CHECKING THE DEVICE UPON ARRIVAL .......................................................................................................................... 5

PRODUCT VIEW .............................................................................................................................................................. 6

6.1.

RONT SIDE

........................................................................................................................................................................ 6

6.2.

ACK SIDE

.......................................................................................................................................................................... 7

6.3.

VESA

MOUNTING FIXTURE

.................................................................................................................................................... 8

6.4.

USB

CABLE

........................................................................................................................................................................ 8

CONNECTION TYPES .......................................................................................................................................................

INSTALLATION ................................................................................................................................................................

8.1.

SSEMBLING THE PEN HOLDER

............................................................................................................................................... 9

8.2.

OLDING OUT

IN THE SUPPORT

.............................................................................................................................................. 9

8.3.

NSERTING THE

USB

CABLE

.................................................................................................................................................. 10

8.4.

OWER SUPPLY VIA

USB ..................................................................................................................................................... 10

8.5.

SING AN EXTERNAL POWER SUPPLY UNIT

.............................................................................................................................. 10

8.6.

ONFIGURING THE DISPLAY SETTINGS

.................................................................................................................................... 10

8.7.

ONFIGURING THE PEN INPUT

.............................................................................................................................................. 11

8.8.

ONFIGURING THE CAPACITIVE TOUCH

................................................................................................................................... 11

MAINTENANCE, CARE AND CLEANING .......................................................................................................................... 12

9.1.

EN AND PEN CARTRIDGE

.................................................................................................................................................... 12

9.2.

EPLACING THE CARTRIDGE

................................................................................................................................................. 12

9.3.

EPLACING THE PEN

........................................................................................................................................................... 12

9.4.

ARE AND CLEANING

.......................................................................................................................................................... 12

10.

WARRANTY .............................................................................................................................................................. 13

10.1.

URATION AND NATURE OF THE WARRANTY

....................................................................................................................... 13

10.2.

XCLUSION OF WARRANTY

............................................................................................................................................... 13

11.

SUPPORT AND REPAIRS ............................................................................................................................................ 14

11.1.

ECHNICAL SUPPORT

...................................................................................................................................................... 14

11.2.

EPAIRS

....................................................................................................................................................................... 14

11.3.

VERVIEW OF ACCESSORIES AND SPARE PARTS

.................................................................................................................... 14

12.

DISPOSAL OF DEVICE ................................................................................................................................................ 15

13.

DECLARATIONS OF CONFORMITY ............................................................................................................................. 15

1. Thank you!

Thank you for having chosen one of signotec’s roducts. You now have a robust, durable and high-

tech solution that is unrivalled in this market segment. The signotec Delta Pen Dis lay is a monitor

extension featuring en in ut and o tionally available ca acitive touch functionality. The device func-

tions as a monitor and can be managed using the Windows settings (to du licate or extend the main

dis lay). The su lied en is used to ca ture writing characteristics (biometrics) accurately and in a

high resolution.

2. Symbols

S ecial attention in this user manual is drawn to s ecific situations, im ortant notes and general

information using a system of symbols and colours.

Caution: Situations that can lead to injuries, errors or damage.

Note: Situations in which attention should be given to s ecific notes and information on

com atibility.

Tip: Notes and ti s for usage.

. Warnings and precautions

This user manual contains detailed information about the installation and setu of the signotec

signature ad. The following sections describe the device itself, as well as how to install, configure

and ro erly maintain the device.

Before you start using the device, lease read all information, warnings and safety instructions care-

fully to take full advantage of the roduct’s long service life. Failure to com ly with these recautions

will result in the loss of your warranty. Furthermore, signotec will not acce t any res onsibility for the

re air or re lacement of the device.

•The signature ad was rimarily designed for use in an office environment, over the counter

or for mobile use and has been tested in this o erating environment. The use of the device in

other fields of a lication may damage it and is undertaken entirely at the user’s own risk.

•The ad is neither water roof nor ex losion- roof. In addition, you should avoid extreme fluc-

tuations in tem erature. Never use the device in very dusty environments.

•Make sure to not scratch the dis lay or lace shar or heavy objects on the device. Avoid

violently shaking (from im acts or dro s, for exam le) the device in order to revent damage

to the com onents.

•The screen’s surface can become damaged by en ti s that are ointy or have shar edges.

Re lace the en ti or cartridge once it shows signs of use.

•Never ex ose the roduct to high-voltage electrostatic discharges or the build-u of electro-

static charge on the LCD screen. It could cause the LCD screen to tem orarily become atchy.

If atches do a ear, leave the device’s dis lay turned on. The atchiness will disa ear after

a few hours.

•The signature ad and the su lied en are designed to be used together. You will void the

warranty if you use these two com onents of the roduct se arately.

•In case of damage to the LCD screen, DO NOT touch the liquid that may leak out under ANY

CIRCUMSTANCES. This liquid may cause skin irritation. Immediately rinse the affected area

under running water for at least 15 minutes if the liquid comes in contact with your skin, eyes

or mouth. If the liquid comes in contact with your eyes or mouth, consult a doctor as well.

4. Other resources

In addition to the user manual, signotec also rovides further information such as roduct descri tions

and technical data sheets online. For additional downloads and information, lease contact your dealer

or visit www.signotec.com.

Please read this user manual carefully before installing and using the device to

ensure that you handle it safely.

5. Checking the device upon arrival

Immediately u on or after receiving the roduct, check that all associated com onents have been

delivered. If a com onent is missing, defective or visibly damaged, lease contact signotec or the

authorised dealer from whom you urchased the roduct within one working day. If you do not com-

lain about a missing, defective or visibly damaged com onent within the eriod of time from recei t

of the roduct, the roduct is considered to have been ro erly acce ted and it remains at the sole

discretion of the dealer to deliver or re lace missing, defective or damaged com onents after this

eriod. It is u to you (as the customer) to rove the non-conformity of the delivery u on recei t of

the roduct.

The sco e of delivery for your signature ad includes:

signotec Delta Pen Dis lay

Battery-free en with re laceable cartridge (attached to the pad by a cord)

USB Y-cable

Re lacement cartridge and tool

Vertical en holder

6. Product view

6.1. Front side

1 USB cable 4 Ergonomic en with re laceable en ti

2 Liquid Crystal Dis lay (LCD) with

a hardened glass surface 5 Cord (attached to the device and en)

3 Status LED

①

③

②

④

⑤

6.2. Back side

1 Pen holder (horizontal) 7 Foldout su ort

2 Pen with cord

(attached to the device and en) 8 Device designation

3 USB cable 9 Item number

4 Mounting fixture for a vertical

en holder 10 Hardware revision number

5 Tension relief for USB cable 11 Barcode with unique serial number

6 Micro-USB ort 12 VESA mounting fixture (75 × 75 mm)

①

③

②

⑥

⑦

④

⑤

⑧

⑩

⑨

⑪

⑫

6. . VESA mounting fixture

There are markings for a 75 × 75 mm VESA mounting fixture on the back of the signature ad.

Thermo lastic screws (such as the Ejot or Schriever brand) with a diameter of 3 mm and a

maximum enetration de th of 6.5 mm must be used for mounting.

6.4. USB cable

The su lied USB Y-cable has three different lugs. The Micro-USB lug is connected to the device.

The black lug rovides ower and data transfer and the orange lug rovides an additional ower

su ly. Please refer to the ‘Inserting the USB cable’ section for more information.

7. Connection types

The signotec Delta Pen Dis lay signature ad is connected to the com uter via USB; there is not an

alternative. If you want to connect a device to a network, then we recommend urchasing a ‘true’

Delta signature ad.

8. Installation

Make sure that you have installed the signotec Pen Display Manager and the DisplayLink driver

before you use the device for the first time. You will need to reboot your com uter after installing the

drivers. You can then connect the device to your com uter.

The device has a removeable USB Y-cable with two standard USB Ty e A lugs and one Micro-USB

lug. The cable is generally used for data transfer and to ower the device. Connect this lug to a free

USB ort of the com uter. The device can also be o erated without a USB connection if it has an

integrated Ethernet connection.

Please install all required drivers on your system before connecting the device.

Remember to reboot your system, as well.

If you use incorrect mounting accessories, it can result in damage to the housing

and the electronics.

Micro-USB connection

USB data connection

USB ower connection

The cable is routed through a small channel on the back of the signature ad to rovide tension relief.

Attaching the cable without tension relief may damage the cable as well as the device. Please refer to

the ‘Inserting the USB cable’ section for more information.

Please connect the cable while taking all necessary safety recautions with regard to other devices

and ersons. The cable should be routed in such a way that under no circumstances is it constantly

under tension. Do not lace heavy objects on the cable, do not bend the cable re eatedly and do not

exert strong ressure on the cable connections. Im ro er loading of the cable or the connector sockets

may result in cable breakage or damage to the device’s com onents or your com uter. Damage that

can be attributed to these causes is not covered by warranty.

Note: Please use only the su lied cable or a ro riate s are arts from signotec to ensure

correct functionality. The USB standard rovides for a maximum cable length of three metres.

signotec cannot guarantee functionality for longer cables.

8.1. Assembling the pen holder

There is a small cutout on the back of the device to attach the su lied, vertical en holder. The

rounded, flat end of the en holder needs to be ressed into this cutout, while a lying a little

ressure, in order to ensure that it stays in lace.

8.2. Folding out/in the support

The signotec Delta Pen Dis lay features a foldout su ort on the back of the device. It can be easily

folded out to raise the device u at an angle. In this manner, the device can be conveniently

ada ted to the conditions wherever it is in use. The erson signing the ad can read the contents

easily and sign comfortably.

When folding out the su ort, ay attention that it is folded out com letely to

ensure a stabile su ort.

8. . Inserting the USB cable

The USB cable is art of the sco e of delivery and it is easily connected

to the device. First you insert the Micro-USB lug into the ort on the

back of the device and route the cable through the tension relief. Then,

you connect both USB Ty e A lugs to a com uter.

8.4. Power supply via USB

The signotec Delta signature ad features a USB Y-cable. The cable has two lugs in order to

rovide the device with sufficient ower (1,000 mA max.). One USB 2.0 lug rovides an out ut of

500 mA in accordance with USB s ecifications. One USB 3.0 lug rovides an out ut of 900 mA.

Often it is sufficient to connect the device only using the black lug for systems with USB 3.0 orts.

However, for systems with USB 2.0 orts, you need to use both lugs in order to rovide sufficient

ower to the device.

If the device is not rovided with sufficient ower, it can mean that it will not turn on, that it may

turn off s oradically or that it will not react to the en in ut.

8.5. Using an external power supply unit

Some systems do not rovide the necessary 500 mA (USB 2.0) or 900 mA

(USB 3.0/3.1) on each ort as er USB s ecification. If the device does not

receive sufficient ower, it will not turn on or it may s oradically turn off.

You will need to use an o tional ower su ly unit to rovide a reliable

source of ower.

It is connected to a ower outlet. The orange lug of the su lied USB-Y

cable is inserted on the other side and connected to the device.

In addition, the black cable is connected to a free USB ort on the com uter.

8.6. Configuring the display settings

After you have installed the drivers and ro erly connected the device, the o erating system

detects the signature ad as an additional monitor. You can du licate or extend the main dis lay

using the system settings for the monitor. In addition, you can also configure the osition of the

monitor, just like you would for a multi-monitor setu .

Im ro er lugging in/out of the USB cable, or doing so too often, can cause damage

to the cable and Micro-USB lug. The warranty does not cover this ty e of damage.

Altri manuali per Delta

Altri manuali Signotec Monitor

Signotec

Signotec Delta PD Manuale utente

Signotec

Signotec Delta TPD Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione