SignWarehouse.com Enduracut Manuale utente
NOTICE
SignWarehouse.com reserves the right to modify the information contained in this user
manual at any time without prior notice; un-authorized modification, copying
distribution or display is prohibited. All comments, queries or
suggestions concerning this manual please consult with your local dealer.
Updates to this and other useful articles can be found at www.signwarehouse.com/support
ImportantInformation
Thank you for purchasing the Vinyl Express Enduracut Cutting Plotter.
Before you use the cutting plotter, please make sure that you have read the
Safety instructions and precautions below.
SAFETY PRECAUTIONS!
¾For safety concern, please always hold the cutter firmly from the bottom while moving it. Do not
move the cutter by clasping the depression area on both sides.
O (correct) X (Incorrect)
¾Do not shake or drop the blade holder, a blade tip can fly out.
¾During an operation, do not touch any of the moving parts of this machine (such as the carriage). Also
be careful to make sure that clothing and hair do not get caught.
¾Always connect the power cable to a grounded outlet.
¾Always use the accessory power cable which is provided. Do not wire the power cable so that it becomes bent
or caught between objects.
¾Do not connect the power cable to branching outlet to which other machines are also connected, or use an
extension cable. There is danger of overheating and of mis-operation of the machine.
¾Keep the tools away from children where they can reach.
¾Always put the pinch rollers within the white marks.
Important Information
1. General Information
1.1 Package Items 1-1
1.2 Product Features 1-1
1.3 The Appearance 1-2
2. Installation
2.1 Precaution 2-1
2.2 Blade Installation 2
2.3 Media Loading 2
2.4 Cable Connections 2
3. Operation
3.1 The Control Panel 3-1
3.2 Cutter Driver Options 3-2
3.3 File Up-loader 3-5
3.4 Data Transmission 3-6
4. Basic Maintenance
4.1 Cleaning the cutting Plotter 4-1
4.2 Cleaning the Grid Drum 4-1
4.3 Cleaning the Pinch Rollers 4-2
5. Trouble Shooting
5.1 What if Enduracut cannot operate? 5-1
5.2 Light Indicators 5-1
5.3 Cutting Quality Problems 5-4
5.4 USB Connection problems (Keyspan) 5-5
Appendix
I Enduracut Specification A-I
1.GeneralInformation
1.1 Package Items
The package of Enduracut-60 contents the items listed below, please check carefully. If you find
any item missing, please consult your local dealer for further assistance.
Item Quantity
Cutting Plotter 1 Set
Accessories 1 Set
1. Cutting Pad
7. Tweezers
2. AC Power Cord
5. Paper Slitter
3. Desktop Support Brackets
6. RS-232 Cable
1.2 Product Features
The followings are the main features of the Enduracut cutting plotters:
‧Serial interface.
‧Up to 250-grams cutting force.
‧Up to 400 mm/per second cutting speed.
1.3 The Appearance (Enduracut)
1.3.1 The Front View
【Figure 1-1 】
A Primary Pinch Roller To help hold the media during cutting.
C Alignment Ruler To align media with clear guideline marks
D Tool Carriage To help perform cutting job with installed blade or pen.
F Platen The surface for holding and supporting media while in operation.
H Control Panel Consist of 10 control keys and 6 LED lights.
1.3.2 The Back View
J Grid Drum To move media back and forth in operation.
1.3.3 The Side Views
【Figure 1-3 】 【Figure 1-4 】
Object Description
K AC Power Connector To insert the AC power cord.
L Fuse 3Amp.
M Power Switch To turn on or off the machine.
N USB Connector To connect the machine and a computer through a
USB cable.
O Serial Interface Connector To connect the machine and a computer through a
RS-232 cable.
2.Installation
2.1 Precaution
Please read below information carefully before you start installation.
Notice 1
¾Make sure the power switch is off before installing the cutting plotter.
¾Carefully handle the cutter to prevent any injuries.
Notice 2
Choosing a proper place before setting up the cutting plotter
Before installing your cutting plotter, select a suitable location, which meets the following conditions.
¾The machine can be approached easily from any direction.
¾Keep enough space for the machine, accessories and supplies.
¾Keep the working area stable, avoiding severe vibration.
¾Keep the temperature between 10 and 35℃ (50-95oF) in the workshop.
¾Keep the relative humidity between 25% and 75% in the workshop.
¾Protect the machine from dust and strong air current.
¾Protect the machine from direct sunlight or extremely bright lighting.
Notice 3. Connecting the Power Supply
Check the plug of the power cord to see if it mates with the wall outlet. If not, please contact your dealer.
¾Insert the plug (male) into a grounded power outlet.
¾Insert the other end (female) of power cord into the AC connector of cutting plotter.
2.2 Blade Installation
Figure 2-12 is the illustrator of the blade holder. Insert a blade into the bottom of the blade holder and
remove the blade by pushing the pin. Make sure that your fingers are away from the blade tip.
Adjustment depth knob Pin
Outward ring
Step 1 Step 2
Install blade (Figure 2-13). Push the blade to the bottom of the blade
holder (Figure 2-14).
Step 3
Adjust the blade tip to suitable length by screwing “Blade tip adjustment screw” clockwise or count-
clockwise. (Figure 2-15).
Step 4
Insert the blade holder into tool carriage. Please note the outward ring of the holder must put into the
grooves of carriage firmly (see Figure 2-16), fasten the case (Figure 2-17).
Step 5
Use the reversing steps to remove the blade holder.
Step 6
Eject the blade: Push “Blade eject pin” to eject blade when the blade needs to be replaced.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali SignWarehouse.com Plotter
