109
PAIRING INSTRUCTIONS FOR THE BED SHAKER
Bed Shaker Pairing: Once your smartphone is in range of the Bed Shaker
approximately 30' or less the Bed Shaker will automatically pair with your
smartphone. A blue flashing indicator light will flash on the Shaker Module
stick and will change to steady lit no flashing when paired. If the blue LED
is still flashing, you’ll need to turn on the Bluetooth setting in your phones
settings.
ALARMDOCK™APPLICATION SETUP ICONS
(LOCATED AT THE BOTTOM OF THE APP)
There are five icons located at the bottom of the application, below we
explain each individually.
Connect icon (pairing the wireless bed shaker/Vibrator Shaker Module)
Connect icon (pairing with AlarmDock wireless cradle)
Alarm Icon – Tap on the Alarm icon, then tap the + at the top right corner
to setup an alarm. Follow the app instructions. Here you can set multiple
alarms, repeat the alarms with days of the week selections. You can name
the alarm with labels, select the sound type, volume control, tone control,
and select an alarm fade option from 10 seconds to 5 minutes or none.
Timer icon – Tap the Timer icon to set a timer.
Clock Icon with Swipe to Dim Feature – Tap on the Clock icon swipe
on the display screen in either direction to select from eight different display
colors. Once the color has been selected you can dim the display by swiping
left to right or top to bottom.
Settings (located at the bottom right-hand side) – To leave the clock display,
tap anywhere on the screen. Tap settings to see all the choices available.
Adjust the volume, vibration strength. Select how you want to be alerted,
Sound, vibrator or your phones flashing light. Adjust the snooze duration from
5 minutes to 50 minutes, and select the preferred time format 12/24 hour.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by
Silent Call Communications may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
