Simmons SD600 Manuale utente
OWNER’S MANUAL
www.simmonsdrums.net
SimmonsDrums.net
OWNER’S MANUAL
2
OWNER’S MANUAL
SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8. Do not install near the heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety, if
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by
the manufacturer.
THELIGHTNINGFLASHWITHARROWHEADSYMBOLWITHINANEQUILATERALTRIANGLEIS
INTENDEDTOALERTTHEUSERTOTHEPRESENCEOFUNINSULATEDDANGEROUSVOLTAGE
WITHINTHEPRODUCT’SENCLOSURETHATMAYBEOFSUFFICIENTMAGNITUDETOCONSTITUTE
ARISKOFELECTRICSHOCKTOPERSONS.
APPARATUSSHALLNOTBEEXPOSEDTODRIPPINGORSPLASHINGANDTHATNOOBJECTS
FILLEDWITHLIQUIDS,SUCHASVASES,SHALLBEPLACEDONTHEAPPARATUS.
THEEXCLAMATIONPOINTWITHINANEQUILATERALTRIANGLEISINTENDEDTOALERT
THEUSERTOTHEPRESENCEOFIMPORTANTOPERATINGANDMAINTENANCE(SERVICING)
INSTRUCTIONSINTHELITERATUREACCOMPANYINGTHEPRODUCT.
12. Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over (Figure1).
13. Unplug this apparatus during lightning storms or
when unused for a long periods of time.
14. Refer all servicing to qualied service personnel. Ser-
vicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been ex-
posed to rain or moisture, does not operate normally,
or has been dropped.
WARNING: To reduce the risk of re or electric shock, do
not expose this apparatus to rain or moisture.
CAUTION: Apparatus shall not be exposed to dripping or
splashing and no objects lled with liquids, such as vases,
shall be placed on the apparatus.
CAUTION: Apparatus shall not be exposed to dripping or
splashing and no objects lled with liquids, such as vases,
shall be placed on the apparatus.
Figure 1
3
CONGRATULATIONS!
…on your purchase of this Simmons SD600 Electronic Drum Kit.
To get the most enjoyment from this kit, we recommend that
you skim through this manual at least once, then refer back to it
to learn more about specic functions.
CARING FOR YOUR SD600
ELECTRONIC DRUM SET
LOCATION
• Keep the drum kit away from direct sunlight, high
temperature sources, and excessive humidity to prevent
deformation, discoloration, or more serious damage
POWER SUPPLY
• Turn the power switch OFF when the SD600 is not in use.
• The AC adapter should be unplugged from the AC outlet if the
SD600 is not to be used for an extended period of time.
• Avoid plugging the AC adapter into an AC outlet that is also
powering high-consumption appliances such as electric
heaters or televisions. Also avoid using multi-plug adapters,
since these can reduce sound quality, cause operation errors,
and result in possible damage.
• To avoid damaging the unit, turn the SD600 and all related
devices OFF prior to connecting or disconnecting cables.
HANDLING AND TRANSPORT
• Never apply excessive force to controls, connectors, and
other parts.
• Unplug cables by gripping the plug rmly. Do not pull on
the cable.
• Disconnect all cables before moving the module.
• Physical shocks caused by dropping, bumping, or placing
heavy objects on the module can result in scratches and more
serious damage.
CLEANING
• Clean the module with a dry, soft cloth.
• A slightly damp cloth may be used to remove stubborn grime
and dirt.
• Never use cleaners such as alcohol or thinner.
• To avoid discoloration, do not place vinyl objects on top
of module.
ELECTRICAL INTERFERENCE
• The module contains digital circuitry and may cause
interference if placed too close to radio or television receivers.
If this occurs, move the SD600 further away from the affected
equipment.
SERVICE AND MODIFICATION
• There are no user serviceable parts in the drum module.
• Do not attempt to open the sound module or make any
change in the circuits or parts of the unit. This would void
the warranty.
4
OWNER’S MANUAL
TABLE OF CONTENTS
SAFETY INSTRUCTIONS ...................................2
CONGRATULATIONS ......................................3
ASSEMBLED KIT ..........................................5
FEATURES ................................................6
ASSEMBLING YOUR KIT ...................................7
CONNECTIONS
Connecting the Module and Pads .....................11
AC Adapter............................................12
Connecting Audio Equipment ........................13
Connecting MIDI Devices and Computers. . . . . . . . . . . . . 14
SD600 DRUM MODULE OPERATION
Top Panel .............................................15
Bottom Panel .........................................16
Back Panel ............................................16
Side Panel.............................................16
QUICK START OPERATIONS
Turning the Power On.................................17
Basic Operations ......................................17
Listening to the Demo Songs .........................18
Selecting a Kit.........................................18
Playing a Song ........................................18
Muting the Drum Part ................................18
KIT MODE - ADVANCED
Editing a Kit ...........................................19
Rename a Kit ........................................ 20
Saving a Kit .......................................... 20
Kit Reset ............................................. 20
SONG MODE
Playing a Song ........................................21
Muting the Drum Part ................................21
Editing a Song ........................................21
RECORDING A SONG
Recording Settings....................................22
Clicking Settings ......................................22
UTILITY MODE
Utility Mode Settings..................................23
Trigger Settings .......................................23
MIDI Note Settings ....................................23
Pad MIDI Note Assignments ..........................23
MIDI Local Settings....................................24
Auto Power Mode .....................................25
Factory Reset .........................................25
Tempo ................................................25
APPENDIX
Voice List ..............................................26
Kit List.................................................31
Song List ..............................................31
MIDI Implementation Charts..........................32
Warranty ..............................................36
Customer Service .....................................36
5
FINAL ASSEMBLED KIT
6
OWNER’S MANUAL
FEATURES
SD600 SOUND MODULE GENERAL FEATURES
POLYPHONY
• Voices - 64
SOUND
• Drum Voices - 336
• Drum Kits - 35 Preset / 10 User
• Songs - 3 Preset / 10 User
EFFECTS
• Reverb - Hall1, Hall2, Room1, Room2, Room3, Stage1, Stage2,
Plate, Delay, Echo, Off.
• Chorus - Chorus1, Chorus2, Chorus3, Chorus4, Feedback,
Flanger, Short Delay, Flanger2, Flanger3, Celeste1, Celeste2,
Celeste3, Off.
TRIGGER INPUTS
• 25-Pin Multi Trigger Input
• ¼” Tom 4 Input
• ¼” Crash 2 Input
HARDWARE
• Drum Rack and mounts
• Kick Drum pad
• 10” Dual zone Snare mesh drum
• 8” Dual zone Tom mesh drums (x3)
• 10” Single zone Hi Hat pad
• 10” Single zone Crash Cymbal pad with Choke
• 12” Single zone Ride Cymbal pad
• Hi-Hat pedal (x1)
• Kick Beater pedal (x1)
EXTERNAL CONNECTIONS
• 1/8” Headphone Output
• ¼” Master Outputs (x2)
• ¼” Pad Inputs (x2)
• 1/8” TRS Aux Input
• USB Connection for MIDI via computer
• Bluetooth Wireless MIDI
SEQUENCER
• Preset Songs - 3
• User Songs - 10
• Tempo- 20-280 BPM
• Click/Metronome- Click voice, Time Signature, Tempo, Interval,
Volume
POWER
• 9v, 600ma
7
ASSEMBLING YOUR KIT
INSIDE THIS PACKAGE
Before assembly, please make sure that all the items listed below are present.
Cymbals
Drum Rack
Accessories
Kick Pad
Bass Drum Pedal / Trigger
module
SD600KICK /
SD600BEATER
Drum Module
SD600M
Hi-Hat Pedal
Foot Controller
SD600HHC
Hi-Hat Arm (Short)
2 Cymbal Arms (Long)
Multi-pin Cable Harness
1 Pair
Drumsticks
AC Adaptor
4 L–Rods for Pads
10–Velcro
Cable Strips
Drum Key
Single Zone
12” Ride Cymbal Pad
SD600CYM12S
Drum Pads
Dual Zone 10” Snare
Mesh Drum
Dual Zone 8” Tom Mesh Drums
SD600PAD8SD600SN10
Single Zone with Choke
10” Crash Cymbal Pad
SD600CYM10SC
Single Zone
10” Hi-Hat Cymbal Pad
SD600CYM10S
SD600RK
8
OWNER’S MANUAL
ASSEMBLING YOUR KIT
THE SD600 DRUM RACK COMES PREASSEMBLED
WITH ALL CLAMPS ALREADY IN PLACE.
1. Pull rack out of box.
2. Loosen nuts on side arms and snare clamps so you can rotate bars.
3. Pull the side arms and snare arm out into their playing positions.
4. Tighten nuts on side arm clamps.
5. Loosen L-rod wing nuts on tom clamps. Insert textured plastic of L-rod into tom clamps
and tighten wing nuts.
6. Loosen wing nuts on pads.
7. Attach pads to L-rods and tighten wing nut on Tom Pads.
NOTE: We recommend putting the SD600 on a drum rug to keep the components together.
9
ASSEMBLING YOUR KIT
ATTACHING THE CYMBAL PADS
1. Insert each cymbal arm into the rack clamp.
2. Insert short hi-hat arm on the left-side arm’s cymbal clamp.
3. Remove wing nut from cymbal tilter. Place cymbal pad on tilter assembly.
4. Re-attach washer and wing nut. Tighten wing nut.
ATTACHING THE DRUM MODULE AND DRUMS
1. Loosen wing screws on drum rack.
2. Place drum module into drum clamp.
3. Tighten wing screw to secure module.
4. Place drums into mounting rods and tighten with wing screws.
10
OWNER’S MANUAL
ASSEMBLING YOUR KIT
BASS DRUM AND HI-HAT PEDAL
1. Place the hi-hat pedal on the oor and to the left, as illustrated below.
2. Connect the kick drum beater pedal to the front of the kick drum pad.
3. Place the bass pad and beater pedal on the oor in the center of the
rack as illustrated.
Indice
Altri manuali Simmons Tamburo
Simmons
Simmons SDS 9 Manuale utente
Simmons
Simmons SD81 Manuale utente
Simmons
Simmons SD5K Manuale utente
Simmons
Simmons SDS 8 Manuale utente
Simmons
Simmons SD9K Manuale utente
Simmons
Simmons SD XPRESS Manuale utente
Simmons
Simmons SD1000 Manuale utente
Simmons
Simmons SDMP1 Manuale utente
Simmons
Simmons SD7K Manuale utente
Simmons
Simmons SD1250 Manuale utente
Simmons
Simmons SD1 Manuale utente
Simmons
Simmons SDS 9 Manuale utente
Simmons
Simmons SD7PK Manuale utente
Simmons
Simmons SDMK4 Manuale utente
Simmons
Simmons SDS 800 Manuale utente
Simmons
Simmons sd1000 kit Manuale utente
Simmons
Simmons SD5X Manuale utente
Simmons
Simmons SDXpress2 Manuale utente
Simmons
Simmons SD500 Manuale utente
Simmons
Simmons SD2000 Manuale utente
