5.
Installation
1.
When making elect
ri
cal
connections it is always recommended that
the
vehicle's
battery
be
disconnected from the electrical system before performing the
installation.
Please Note:
If
the radio is equipped with a built in
CD
Changer, please remove
ALL
d1scs
beforeproceeding to
prevent damage
to
the radio's CD mechan1sm.
2. Carefully remove
the
trim panels covering the 7mm bolts that secure the
radi
o into
the dash
cavity.
Remove these bolts,
and
carefully
pull
the
radio from the dash of
the vehicle. This will provide access to
the
factory
radio
connectors where
you
will
connect the Media Gateway harness.
3. Disconnect the factory 24-Pin harness
and
12-Pin harness (ifpresent) from the
back
of
the
radio.
Disconnect
the
antenna
from
the
rad
i
o.
4. Connect
the
8-Pin
iPod
docking cable into
the
first port
on
the
Media Gateway
(farthest awayfrom dipswitches).Carefully
run
the
11
foot
iPod
cable behind
the dash
to
the location where
the
iPod
will
be
mounted or stored (for example the
glove box or centerconsole). This location will vary based
on
the vehicle,
and
the
customer's prefrence. When running this cable through the dash
be
sure
to
secure
it away
from
moving parts or sharp metal edges that may damage the cable.
5.Connectthe 8-Pin auxiliary input cable
to
the second port (closestto the
dipswitches)
on
the Media Gateway if
an
additional auxiliary input
is
desired.
6. Ifconnecting the HD
Radio
Tuner (HDRT
sold
separartely), make
the
folllowing
connections before connecting the PXAMG to the vehichle.
Plug
the 3foot HD
Radio Cable (8-Pin mini-din
to
8-Pin
mini-din) cable into the second port (closest
to
the
dipswitches)
on
the Media Gateway.Connect
the
other
end
of
th
is cable into
the
HD
Radio
tuner.
Connect the factory antenna cable
into
the antenna
connection
on
the
HD
Radio
tuner (HDRT).
7.Ifconnecting the Satellite Radio tuner
(SCC1
sold
separartely), make the folllowing
connections before connecting the PXAMG
to
the
vehicle.
Plug
the black
end
of
the 3foot
ISSR11
(8-Pin mini-din
to
8-Pin
mini-din;
sold
separately) into the
second port (closestto the dipswitches) on
the
Media Gateway. If
you
are installing
the Satellite Radio Tunerwith the HDRT,connectthe
ISSR11
cable
to
the port
farthest from the dipswitches. Connect
the
gray
end
ofthis cable into
the
Satellite
Radio tuner.
8. Ifconnecting the
ISBT21
(
sold
separartely), make the folllowing
4
connections before connecting the PXAMG
to
the
vehichle.
Plug
the 3foot
ISBT21
Cable (8-Pin mini-din
to
8-Pin mini-din)cable
into
the
first port (farthest
from
the dipswitches)
on
the Media Gateway.Connect the other
end
ofthis cable
into the
ISBT21
.Connect
the
microphone cable into the 3.5
mm
co
nnecti
on on
the
ISBT21
.
