Simplex SmarTerm 320 Manuale
SmarTerm®320
Installation/Operating
Instructions
© 1993 Simplex Time Recorder Co. MUX2-21-013 (574-460)
All specifications and other information shown were current as of publication, and are subject to change without notice. Ed 10 93
-2
-1
TABLE OF CONTENTS
INTRODUCTION .......................................................................................................................................................1
Supplied Documentation .....................................................................................................................................1
SmarTerm 320 INSTALLATION .................................................................................................................................1
Universal Transponder Setup ............................................................................................................................13
Universal Transponder Hardware Connection...................................................................................................22
2120 Terminal Mode Setup ...............................................................................................................................23
2120 Terminal Mode Hardware Connection......................................................................................................31
SmarTerm 320 KEYBOARD MAPPING...................................................................................................................31
OPERATING THE SmarTerm 320 WITH A UNIVERSAL TRANSPONDER............................................................32
OPERATING THE SmarTerm 320 WITH A 2120.....................................................................................................35
i
0
1
INTRODUCTION
This publication provides a comprehensive guide to SmarTerm 320 software installation on an IBM-compatible PC.
For more detailed installation instructions, refer to the SmarTerm 320 User Guide supplied with the software.
Note: The illustrations provided may differ from actual screen information. Change actual screen information to
match illustrations only where noted.
Supplied Documentation
•SmarTerm 320 Installation Guide
•SmarTerm 320 Technical Reference Guide
•SmarTerm 320 User Guide
•Registration Packet
SmarTerm 320 INSTALLATION
Note: For these instructions consider Drive A as the floppy drive and Drive C as the hard drive.
1. Locate the software package containing the program diskettes.
2. Insert the diskette labeled SmarTerm 320 Installation & Program 1 into the floppy drive.
3. At the DOS prompt C:\>, type a:install then press Enter.
•Figure 1 appears.
Figure 1
SmarTerm 320 Installation Program
Version 2.0a
(c) Copyright 1990-92, Persoft, Inc.
This program installs SmarTerm 320 on your PC
automatically. You can quit running it at any time
by pressing Esc.
Press any key now to begin the program...
2
4. Press any key.
•Figure 2 appears. The information displayed in Figure 2 is determined by SmarTerm.
Figure 2
5. Press any key.
•Figure 3 appears.
Figure 3
The following list shows your system configuration. It’s just
for your information; you’ll get a chance to confirm items later.
DOS Version: 5.0
DOS RAM installed in bytes: 655360
EMS memory is not present
You are running on an 80286 CPU
Your video card is a Color card
Your monitor is a Color Display
Press any key to continue...
Full installation
Selective installation
Select the type of installation.
Choose “Full installation” the first time through.
Use “Selective installation” to make changes to
your system later.
Move the bar cursor to the item you want and press ENTER.
3
6. In Figure 3, select Full Installation and press Enter.
•Figure 4 appears.
Figure 4
7. In Figure 4, choose Drive C: as the location for SmarTerm to be installed; then press Enter.
•Figure 5 appears.
Figure 5
Drive A:
On which disk drive do you want to install SmarTerm 320?
Drive B:
Drive C:
Drive D:
In which subdirectory do you want to install SmarTerm 320?
will create it for you.
Press ENTER to accept the subdirectory name in the box below.
OR, press ESC to erase the box, and type in a different name.
\ST320
If the subdirectory doesn’t already exist, the installation program
Which subdirectory?
4
8. In Figure 5, press Enter to select the subdirectory displayed. This directory is where you want SmarTerm
installed.
•Figure 6 appears.
Figure 6
9. In Figure 6, select Enhanced as the keyboard type and press Enter.
•Figure 7 appears.
Figure 7
Enhanced
Please select your keyboard type.
IBM AT
IBM PC/XT
DEC LK250
•numeric keypad AND also has keys labeled F11 and F12.
•numeric keypad.
•
The enhanced keyboard has 4 keys in the top row of the
The IBM AT keyboard has 4 keys in the top row of the
logo on the underside of the keyboard.
The DEC LK250 is manufactured by Digital and has a Digital
The IBM PC/XT keyboard has 3 keys in the top row of
the numeric keypad.
•
None
Please select your graphic display driver.
Hercules Graphics Adapter
Enhanced Graphics Adapter
Video Graphics Array Adapter
Video Graphics Array Hi-Res Adapter
5
10. In Figure 7, select None as the graphic display driver and press Enter.
•Figure 8 appears.
Figure 8
11. In Figure 8, select No 132-column video card and press Enter.
•Figure 9 appears.
Figure 9
No 132-column video card
Do you have a card that provides true 132-column displays?
Ahead EGA 2001
Ahead EGA 2001+
Ahead EGA Wizard Deluxe
AST-3G
If so, please select your 132-column hardware driver.
Use arrow keys, PgUp, PgDn for more choices.
AST Preview
ATI Graphics Solution
ATI EGA Wonder
ATI VGA Wonder
Compaq VGA
Everex Edge
Everex Micro Enhancer
Everex ViewPoint
Serial Communication Only
Please select the type(s) of communication.
Network Communication Only
Both Serial and Network Communication
If you choose both serial and network communication
SmarTerm 320 will use more memory.
6
12. In Figure 9, select Serial Communications Only as the type of communication and press Enter.
•Figure 10 appears.
Figure 10
13. In Figure 10, select 512 bytes as the communications buffer and press Enter.
•Figure 11 appears.
Figure 11
512 bytes
Please select the size of the communications buffer.
1024 bytes
2048 bytes
4096 bytes
SmarTerm uses this buffer to store data as it comes in over
8192 bytes
the communication line. A larger buffer yields faster file
transfers, but uses more memory. If you are interested in saving
memory, choose “512 bytes.”This setting should be adequate for
most users. However, if you are more concerned about rapid file
transfers, choose one of the larger numbers.
No printer to be used
DEC LJ250/252 Companion Color Printer ( 90 DPI)
DEC LJ250/252 Companion Color Printer (180 DPI)
DEClaser 2000 Family of Printers (100 DPI)
DEClaser 2000 Family of Printers (300 DPI)
Epson FX Printer
Epson LQ Printer
IBM Color Graphics Printer
IBM Proprinter
IBM Proprinter 2390
HP LaserJet (100 dpi)
HP LaserJet (300 dpi)
HP LaserJet II (100 dpi)
Please select your first printer.
Use arrow keys, PgUp, PgDn for more choices.
Indice
