Simplicity 1692149 Guida all'installazione

Rev. 10/2000

TP 400-2441-00-AT-SMA

Attachment

Illustrated

Parts List

MANUFACTURING, INC.

500 N Spring Street / PO Box 997

Port Washington, WI 53074-0997 USA

TP 400-2441-00-AT-SMA

Clean Sweep Twin Catcher - Cover & Bag Group

NOTE: Unless noted otherwise,

use the standard hardware torque

specification chart.

983952

The above parts group applies to the following Mfg. Nos.:

1692149 Clean Sweep Twin Catcher

789

25 26

TP 400-2441-00-AT-SMA

Clean Sweep Twin Catcher - Cover & Bag Group

1 1704615 1 TUBE ASSEMBLY Support (Incl. Ref. Nos. 2, 3, 4, 5, 6, 8, 9 & 11)

2 1960381 7 RIVET, Pop

3 1704075 1 SUPPORT, Tube

4 1704135 1 SEAL, Cover

5 1704508 3 BRACKET, Seal

6 1960399 1 SCREW, Round Head, #8-32 x 7/8

7 1930642 5 LOCKNUT, Flange, 1/4-20

8 1960096 2 WASHER

9 1704507 1 STRAP, Tube Support

10 1927428 2 SCREW, Taptite, 1/4-20 x 3/8

11 1960077 2 NUT, Hex, Lock, #8-32

12 1960252 5 CARRIAGE BOLT, 1/4-20 x 5/8

13 1703822 1 CROSS ASSEMBLY.

14 1921966 4 CAPSCREW, Hex Head, 3/8-16 x 7/8

15 1928352 4 NUT, Hex, Whizlock, 3/8-16

16 1960221 2 CLIP, Hairpin

17 1703700 1 SCREEN

18 1917372 4 NUT, Hex, 5/16-18

19 1917356 4 LOCKWASHER, 5/16

20 1672023 2 CLAMP

21 1703807 2 HANGER

22 1931333 4 CARRIAGE BOLT, 5/16-18 x 3/4

23 1703855 2 HOOP, Bag

24 1703764 2 BAG, Grass

25 1675707 2 TUBE CLIP, Grass Bag

26 1704057 1 SEAL, Clip

27 1930531 2 SCREW, Truss Head, #10-32 x 1/2

28 1675043 4 RIVET, Pop

29 1703853 1 HANDLE, Latch

30 1928919 2 NUT, Hex, #10-32

31 960367 2 PIN, Round Head

32 1910531 4 WASHER

33 1667248 6 CLIP, Canoe

34 1704405 1 DECAL, Safety

35 1704033 1 COVER

36 1704180 2 WINDOW

37 1933886 1 NUT, Speed

38 1705876 1 CABLE, Double Loop

39 1921319 1 WASHER, 1/4

40 1960400 1 SCREW, Self-tapping, #10-12 x 5/8

41 1704056 1 COVER ASSEMBLY (Incl. Ref. Nos. 17, 26, 28, 32, 37, 38, 39 & 40)

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692149 Clean Sweep Twin Catcher

TP 400-2441-00-AT-SMA

Clean Sweep Twin Catcher - Hitch Group

NOTE: Unless noted otherwise,

use the standard hardware torque

specification chart.

984491

The above parts group applies to the following Mfg. Nos.:

1692149 Clean Sweep Twin Catcher

TP 400-2441-00-AT-SMA

Clean Sweep Twin Catcher - Hitch Group

1 1709111 1 SUPPORT, Catcher

2 102004 1 PIN, Round Head, Drilled

3 1709022 1 SUPPORT ASSEMBLY

4 176012 1 CLIP, Pin, Safety

5 1923141 4 CAPSCREW, Hex Head, 5/16-18 x 2-1/2

6 1919326 8 WASHER, Plain 5/16

7 1709026 2 ANCHOR ASSEMBLY

8 1917356 4 LOCKWASHER, 5/16

9 1917372 4 NUT, Hex, 5/16-18

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692149 Clean Sweep Twin Catcher

TP 400-2441-00-AT-SMA

Clean Sweep Twin Catcher - Adapter, Blade & Tube Group

NOTE: Unless noted otherwise,

use the standard hardware torque

specification chart.

984489

The above parts group applies to the following Mfg. Nos.:

1692149 Clean Sweep Twin Catcher

Install between

Items 24 & 16

19 20

27 28

TP 400-2441-00-AT-SMA

Clean Sweep Twin Catcher - Adapter, Blade & Tube Group

1 1928919 4 NUT, Hex Washer Assembly, Hex, #10-32

2 1930531 4 SCREW, Truss Head, #10-24

3 1713286 1 EXHAUST SHIELD, Front

4 1713287 1 EXHAUST SHIELD, Rear

5 1703769 1 TRANSFER TUBE

6 1960122 1 CAPSCREW, Hex Head, 5/16-18 x 3/4

7 1919326 1 WASHER, Flat, 5/16

8 1704603 1 LATCH, Tube

9 1960185 1 WASHER, Flat, 3/16

10 1935048 1 NUT, Flange Lock, 5/16-18

11 1960371 1 CAPSCREW, Hex Head, 5/16-18 x 3/4

12 1704341 1 WASHER, Special, 11/32 x 7/8 x 1-3/4

13 1919438 1 LOCKNUT, Hex, 5/16-18

14 1686783 1 BAFFLE, Corner

15 1920161 2 NUT, Hex Jam, 5/16-18

16 1709134 1 ADAPTER

17 1933896 2 NUT, Hex Head, #10-24

18 1960096 2 WASHER, Flat, 3/16

19 1928698 1 NUT, Hex Centerlock, 5/16-18

20 1679163 1 WING NUT ASSEMBLY, 5/16

21 1927557 1 NUT, Hex Flange, 5/16-18

22 1679164 1 CUP

23 926267 2 SCREW, Flat Head, #10-24 x 5/8

24 1704356 1 STRAP, Reinforcement

25 1960223 1 CARRIAGE BOLT, 5/16-18 x 1-1/4

26 1960273 1 CARRIAGE BOLT, 5/16-18 x 2-1/4

27 1935105 4 CAPSCREW, 1/4-20 x 5/8, Gr. 8

28 1665419 2 LIFT PLATE

29 1916964 4 LOCKWASHER, Spring, 1/4

30 1916622 4 LOCKNUT, Hex, 5/16-18

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1692149 Clean Sweep Twin Catcher

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware

Grade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Of

in/lbs in/lbs

in/lbs

Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32

2.1

3.4

4.6

8-36

2.3

3.5

4.9

10-24

3.1

4.9

6.8

10-32

3.5

5.5

7.7

1/4-20

7.6 810.9 12 16.3

1/4-28

8.6 10 13.6 14 19.0

5/16-18 11 15.0 17 23.1 25 34.0

5/16-24 12 16.3 19 25.8 27 34.0

3/8-16 20 27.2 30 40.8 45 61.2

3/8-24 23 31.3 35 47.6 50 68.0

7/16-14 30 40.8 50 68.0 70 95.2

7/16-20 35 47.6 55 74.8 80 108.8

1/2-13 50 68.0 75 102.0 110 149.6

1/2-20 55 74.8 90 122.4 120 163.2

9/16-12 65 88.4 110 149.6 150 204.0

9/16-18 75 102.0 120 163.2 170 231.2

5/8-11 90 122.4 150 204.0 220 299.2

5/8-18 100 136 180 244.8 240 326.4

3/4-10 160 217.6 260 353.6 386 525.0

3/4-16 180 244.8 300 408.0 420 571.2

7/8-9 140 190.4 400 544.0 600 816.0

7/8-14 155 210.8 440 598.4 660 897.6

1-8 220 299.2 580 788.8 900 1,244.0

1-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES

1. These torque values are to be used for all hardware

excluding: locknuts, self-tapping screws, thread forming

screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

torques.

b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.

3. Unless otherwise noted on assembly drawings, all torque

values must meet this specification.

Hardware Identification & Torque Specifications

Common Hardware Types

Screw, 1/2 x 2

Body

Diameter

Body

Length

Inside

Diameter

Nut, 1/2”

Marks

3/8” Bolt or Nut

Wrench—9/16”

3/8

5/16” Bolt or Nut

Wrench—1/2”

5/16

1/4” Bolt or Nut

Wrench—7/16”

1/4

1/2” Bolt or Nut

Wrench—3/4”

1/2

DIA.

7/16

DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

Wrench & Fastener Size Guide

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

, meaning the

inside diameter

is 1/2 inch; if a

second number is present it represent the

threads per inch

When bolt or capscrew is identified as 1/2 - 16 x 2”, this

means the

Nominal size

, or

body diameter

is 1/2 inch; the

second number represents the

threads per inch

(16 in this

example, and the final number is the

body length

of the

bolt or screw (in this example 2 inches long).

The guides and ruler furnished below are designed to

help you select the appropriate hardware and tools.

01/4 3/4

1/2 11/4 3/4

1/2 21/4 3/4

1/2 31/4 3/4

1/2 4

Indice

Altri manuali Simplicity Accessori per tosaerba

Simplicity

Simplicity 1694838 Guida all'installazione

Simplicity

Simplicity 4787 Guida all'installazione

Simplicity

Simplicity 1694542 Manuale utente

Simplicity

Simplicity TP 100-200 Manuale utente

Simplicity

Simplicity 1694916 Guida all'installazione

Simplicity

Simplicity 1694957 Guida all'installazione

Simplicity

Simplicity 991020 Manuale utente

Simplicity

Simplicity 1694561 Manuale utente

Simplicity

Simplicity 1695195 Manuale utente

Simplicity

Simplicity 3912 Guida all'installazione

Simplicity

Simplicity Turbo Turbo Wide Body Cart & Hitch Manuale utente

Simplicity

Simplicity 468 Manuale utente

Simplicity

Simplicity 2623 Manuale utente

Simplicity

Simplicity 1654930 Istruzioni operative

Simplicity

Simplicity 206 Scheda tecnica

Simplicity

Simplicity 319 Manuale utente

Simplicity

Simplicity 167 Manuale utente

Simplicity

Simplicity 1690079 Manuale utente

Simplicity

Simplicity TP 200 530 Manuale utente

Simplicity

Simplicity 1600220 Manuale utente

Simplicity

Simplicity 6000 Manuale utente

Simplicity

Simplicity 460 Manuale utente

Simplicity

Simplicity 1695168 Manuale utente

Simplicity

Simplicity Broardmoor 2600, 1600, LT Series Manuale utente

Manuali Accessori per tosaerba popolari di altre marche

Ariens

Ariens 891008 Manuale utente

Rover

Rover 108 - 109 Manuale utente

Toro

Toro 112-5803 Manuale utente

Snapper

Snapper 1690047 Manuale utente

Scag Power Equipment

Scag Power Equipment GC-F4 Manuale utente

RHINO

RHINO 800 Manuale utente

Exmark

Exmark Quest 126-7506 Manuale utente

Snapper

Snapper 1685167 Manuale utente

Cub Cadet

Cub Cadet 19B70029100 Manuale utente

Stihl

Stihl AMK 043.1 Manuale utente

MTD

MTD 753-0873 Manuale

Toro

Toro 30810 Manuale utente

Bush Hog

Bush Hog RG60 Manuale utente

Land Pride

Land Pride RCF2760 Manuale utente

Toro

Toro Z Master 116-0231 Manuale utente

Exmark

Exmark ULTRAVAC QUICK DUMP SYSTEM Manuale utente

Excel

Excel Two Bag Catcher Manuale utente

Textron

Textron Jacobsen Pro12 DFS Manuale utente