Sinclair KJRM-120H Manuale utente
WIRED
CONTROLLER
MODULAR CHILLER
USER MANUAL
KJRM-120H
AIR CONDITIONING
●This manual gives detailed description of the precautions
that should be brought to your attention during operation.
●In order to ensure correct service of the wire controller
please read this manual carefully before using the unit.
●For convenience of future reference, keep this manual after
reading it.
Contents
1 Safety Precautions ...........................................................................1
2 Overview of Wired Controller ...........................................................3
3 Menu Operations..............................................................................5
1
The product and Operation and Installation Instructions record the following
content, including the operation method, how to prevent harms to others and
property losses, and how to use the product correctly and safely. Read the
text after understanding the content (identification and marker maps) below
carefully, and observe the precautions below.
[Note]: So-called "injuries" mean the harms not requiring hospitalization or
long-term treatment, generally referring to wounds, burns, or electric shocks.
Material damages refer to property and material losses.
!
Caution
!
Warning
!
1 Safety Precautions
Caution
Read the safety precautions carefully prior to installation.
The important safety precautions are provided below and must be observed.
Meanings of marks:
Means improper handling may lead to personal injuries or material damages.
Means improper handling may lead to death or serious injury.
After the installation work is completed, confirm that the trial operation is normal and hand
over the manual to the customer for keeping.
2
It indicates "prohibited". The specific content of prohibition is provided using
graphics or text in the icon or nearby.
It indicates "mandatory". The specific mandatory content is provided using graphics
or text in the icon or nearby.
Icon
Name
Do not spray combustible spray to the wired controller directly; otherwise a fire may be
caused.
Do not perform operations with a wet hand or allow water to enter the wired controller;
otherwise the wired controller will be damaged.
Prohibited
Prohibited
Caution
in Use
Entrust your distributor or a professional to install the product. The installation operator
must have acquired the relevant professional knowledge.
In case of independent installation, wrong operations will lead to a fire, electric shock,
or injury.
Entrusted
installation
Warning
!
!
Do not install the product at a place where flammable gas
easily leaks. Once flammable gas leaks and stays around
the wired controller, a fire may be caused.
!
1 Safety Precautions
Caution
3
2 Overview of Wired Controller
Turn on or off the
space operation
mode
Enter the menu
structure from
the home page
Navigate the
cursor on the
display/navigate
in the menu
structure/adjust
the settings
Come back to
the up level Long press for
unlocking /locking
the controller
Go to the next step when
programming a schedule in the
menu structure / confirm a
selection/enter a submenu in
the menu structure
4
2 Overview of Wired Controller
Lock icon
Timer
icon
Anti-freezing or
manual defrost on
Alarm
icon
Silent
mode on
Water
pump on
External electric
heater on
Number of
parallel units
Compressor
operating
Heating mode
Cooling mode
Auto mode
A
Set temperature
Number of parallel units
Fan on
Centralized control
access of network
WEEKLY
TIME icon
MON
09/20/2015
WEEKLY TIMER ON TIMER ON
COOL ONLINE
UNITES
20
16
C
10:35 A
5
3 Menu Operations
3.1 Unlocking/Locking Operation
3.3 Setting Mode
When the wired controller is locked, press and
hold the "UNLOCK" button for 2s to unlock it,
when " " is not displayed; in the unlocked
status, press and hold the "UNLOCK" button
for 2s to lock it, when " " is displayed and the
wired controller cannot be operated; when
there is no operation for continuous 60s on
any page, the wired controller returns to the
home page and is locked automatically, and
the locking icon is displayed.
3.2 Power-on/off
b. Heating mode
a. Cooling mode
MON
25
C
10:35 A
09.20.2015
HEAT
MON
COOL
20
C
10:35 A
09.20.2015
When the wired controller is unlocked and the
unit is on, "ON/OFF" can be pressed to power
off the unit under the home page only; when
the unit is off, press "ON/OFF" to power on the
unit. The mode can be switched under the
power-off mode only.
In Unlock mode, press the "MENU" button
to enter the menu setting interface, press
the "▼" and "▲" buttons to select "MODE"
and set a mode, and press the "OK" button
as shown in the above figure to access the
submenu (mode setting). As shown below:
Three modes available.
MON
COOL
20
C
10:35 A
09.20.2015
ONLINE
UNITES
16
3.4 User Menu
c. Water pump mode
MON10:35 A
09.20.2015
PUMP
USER MENU
TEMP
SILENCE SWITCH
QUERY
OK
SELECT THE QUERING ADDRESS
07
USER MENU-QUERY
OK
6
When the current mode button is selected
(blinking), press "◄" and "►" to set a
mode or temperature, and then press "▼"
and "▲" to adjust the mode and set
temperature value. After setting, press the
"OK" button to save the setting and go
back to the home page; or press the
"BACK" button to go back to the home
page; if there is no subsequent operation
in 60s, the setting is saved automatically,
and the system returns to the home page.
Select "USER MENU" to enter the user
menu. The interface is as follows:
Select "QUERY" to access the query
function. The interface and operation are
as follows:
The user first uses the "▼" and "▲"
buttons to select the address of module to
view (the offline address is skipped
automatically). Press the "OK" button to
access the lower-layer submenu or press
"BACK" to go back to the previous
interface; during operation on the menu
page, press "BACK" to go back to the
previous interface. After entry, the interface
is displayed as follows:
7
RUNNING
MODE
CURRENT
SILENT
MODE
ON COOL
NIGHT
SILENT
MODE
BACK
STATE QUERY UNIT 07#
UNIT 07#
AMBIENT
TEMP.
IN-LET
WATER
TEMP.
OK
25 C 25 C 25 C
TEMP QUERY
BACK
NO ERROR
CURRENT ERROR
QUERY
TEMP QUERY
CURRENT ERROR QUERY
STATE QUERY
OK
OPERATION
STATE
OUT-LET
WATER
TEMP.
UNIT 07#
◆
State query:
Select "STATE QUERY", and press the
"OK" button to enter the interface. The
interface display is as follows:
◆
Temperature query:
Select "TEMP QUERY", and press the
"OK" button to enter the interface. The
interface display is as follows:
◆
Current error:
Select "CURRENT ERROR", and press
the "OK" button to enter the interface. The
interface display is as follows if there is no
error currently:
If there is an error, the interface display is
as follows, and the current error code and
description are displayed:
Indice
Altri manuali Sinclair Refrigeratore
