Singer Quantum Decor Manuale utente

Quantum

QuantumQuantum

Quantum®Décor and Quantum

Décor and QuantumDécor and Quantum

Décor and Quantum®7312

73127312

7312

Straight Stitch, Reverse and Needle Positions

Straight Stitch

Create Quilted Fabric with the Seam/Quilt Guide

Create Piping with the Zipper Foot

Satin Stitch Appliqué with the Satin Foot

Button Sewing with the Button Sewing Foot

Bartack Buttonholes with the Buttonhole Foot

Blind Hem with the Blind Hem Foot

Narrow Hem with the Narrow Hem Foot*

Gathering with the Cording Foot

Applying Trims, Cords & Braids with the Cording Foot

Attaching Beaded Trims

Couching a Strand of Pearls

Faux Tatted or Crocheted Edging

Crazy Quilting with Decorative Stitches

Sewing Multiple Layers with the Even Feed Foot*

Sewing Plaid Fabrics with the Even Feed Foot*

Sewing Pile Fabrics with the Even Feed Foot*

Straight Stretch Stitch for Woven Fabrics**

Straight Stretch Stitch for Stretch Fabrics**

Ribbing Application**

Overedge Stitching**

Attaching Elastic

Sewing with a Wing Needle

Sewing Leather

Decorative Bobbin Work

*Indicates optional foot for Quantum 7312

** Stitch found only on Quantum Décor

Straight Stitching, Reverse and Needle Positions

Straight Stitching, Reverse and Needle PositionsStraight Stitching, Reverse and Needle Positions

Straight Stitching, Reverse and Needle Positions

Machine Set

Machine SetMachine Set

Machine Set-

-Up:

Up:Up:

Up:

Stitch: “A”, Straight Stitch

Stitch Width: 0, Center Needle Position

Stitch Length: 3

Presser Foot: Standard Foot

Materials

MaterialsMaterials

Materials:

(2)5” X 5” pieces of medium weight cotton

Procedures:

Procedures:Procedures:

Procedures:

Sew a straight stitch on the fabric.

Change the stitch width to 3, notice the needle position changes.

Sew another row of straight stitching.

Change the stitch width to 7, notice the needle is in the far left position.

Sew a straight stitch and compare the differences in needle position.

Sew a straight seam and practice reinforcing the seam using the

reverse knob.

Change the stitch length dial to 1, begin to sew.

Slowly move the stitch length dial to 7, notice how close or far apart the

stitches look depending on the stitch length setting.

Straight Stitching

Machine Set

Machine SetMachine Set

Machine Set-

-up:

up:up:

up:

Stitch: “A”, Straight Stitch

Stitch Width: 0, Center Needle Position

Stitch Length: 3

Presser Foot: Standard Foot

Materials:

Materials:Materials:

Materials:

(2)5” X 5” pieces of cotton with a piece of batting between the two pieces,

creating a quilt-type sample

Procedure:

Procedure:Procedure:

Procedure:

Sew diagonally from the top left corner to the bottom right corner.

Use the reverse lever to reinforce the seam.



Create Quilted Fabric

Machine Set

Machine SetMachine Set

Machine Set-

-Up:

Up:Up:

Up:

Stitch: “A”, Straight Stitch

Stitch Width: 0, Center Needle Position

Stitch Length: 2.5

Presser Foot: Standard Foot

Materials:

Materials:Materials:

Materials:

Quilt-type sample that was previously used on the Straight Stitch exercise

Procedure:

Procedure:Procedure:

Procedure:

Attach the Seam/Quilt guide.

Use the guide to ensure even spacing and straight lines,

or when large (projects cover the machine’s seam guides

on throat plate)

Position fabric approximately 1-2 inches from the

right of the previously sewn straight stitch.

Position the guide so that it rides on the previous row of stitching.

Sew successive rows using the guide.

Change the direction, sew diagonally from the top right corner to the

bottom left corner of the fabric.

Sew 3 or more rows, using the guide.

Quilt pillow tops for a designer look!

Create Piping

Machine Set

Machine SetMachine Set

Machine Set-

-up:

up:up:

up:

Stitch: “A”, Straight Stitch

Stitch Width: 3

Stitch Length: 3

Presser Foot: Zipper Foot

Materials:

Materials:Materials:

Materials:

5” X 6” home décor fabric, cut on bias

7” of purchased cording

Procedure:

Procedure:Procedure:

Procedure:





Fold fabric wrong sides together.









Place cording inside of the fold.





On the right side of the fabric sew a straight stitch close to the piping.





Adjust stitch width to move the needle closer to the piping





Note

NoteNote

Note: The Zipper Foot can be attached right or left, allowing for

the cording to be inserted from either side.

Attach piping to pillows

and furniture to add a bold

finishing touch!

Satin Stitch Appliqué

Machine Set

Machine SetMachine Set

Machine Set-

-up:

up:up:

up:

Stitch: “B”, Zigzag Stitch

Stitch Width: 3

Stitch Length: -1

Presser Foot: Satin Foot

Materials:

Materials:Materials:

Materials:

A simple-shaped appliqué fused onto a cotton-type

fabric (base fabric), with a medium weight

tear-away stabilizer underneath. Fusing the

appliqué into place will prevent the appliqué from shifting while stitching. The

stabilizer underneath the fabric is used to support the fabric when using wide

dense stitches.

Procedure:

Procedure:Procedure:

Procedure:

Place the applique under the transparent foot, so that the left swing of the

needle falls on the applique and the right swing of the needle falls on the

base fabric.

Stitch around the applique.

Widen the stitch width to 4 and change the stitch length to below 1.

Stitch around the applique again, covering the previously sewn stitching.

Sewing over an applique twice is not always necessary, however, it does

give a beautiful full-covered or raised effect.

A close zigzag is called a Satin Stitch.

Button Sewing

Machine Set

Machine SetMachine Set

Machine Set-

-Up:

Up:Up:

Up:

Stitch: “B”, Zigzag

Stitch Width: Determined by button (usually 3mm)

Stitch Length: (does not apply because feed dogs are lowered)

Feed Dogs: Down Position

Presser Foot: Button Sewing Foot

Materials:

Materials:Materials:

Materials:

Home Décor fabric or shirting

(1) two-hole button

Procedure:

Procedure:Procedure:

Procedure:





Fold fabric in half and place under foot.





Position the button on the fabric so that the holes in the button are

between the toes of the foot.





Lower the presser foot to hold the button in place.





Turn the hand wheel forward, adjust so that the needle goes into either

the right or left hole.





Adjust the stitch width dial to fine tune the swing of the needle into the

other hole.





Recheck the swing of the needle into the other hole. Now use the foot

control to stitch 6-8 stitches.

Use buttonholes and decorative

buttons for versatile and stylish

tabs on curtains.











Before removing the button and fabric from the machine, set machine

to straight stitch. Leave width at current setting and stitch in place for

three stitches. This forms a tie-off on the back side to secure the button.





Apply a liquid fray-preventer on the backside of fabric on the knots.

Trim threads after they dry, being careful not to cut thread knots.











Note:

Note:Note:

Note: Remember to raise the feed dogs when finished.

Use decorative buttons to tie-off a quilt or wall hanging!

For a thread shank, place a needle or toothpick on the button and stitch.

Bartack Buttonholes

Machine Set

Machine SetMachine Set

Machine Set-

-Up:

Up:Up:

Up:

Stitch: Step One of the Four-Step Buttonhole

Stitch Width: 5-7

Stitch Length: Buttonhole symbol

Presser Foot: Buttonhole Foot (after attaching, push the moveable

white part to most rear position)

Materials:

Materials:Materials:

Materials:

Home décor fabric with interfacing or tear-away stabilizer

Disappearing marking pen or tailor chalk (for marking size of buttonhole)

Button (to establish length of buttonhole)

Procedure:

Procedure:Procedure:

Procedure:

Fold fabric in half crosswise, with interfacing or stabilizer between layers.

Lay button on fabric and mark the top and bottom of the button.

This will establish the starting and ending points of the buttonhole.

Push the foot’s white movable piece to the most forward red line on

the foot.

Place the fabric under the foot, matching the foot’s red mark with the

bottom mark on the fabric.

Sew 5 to 6 stitches of Step One (which is the lower/bottom bartack)

Cut open buttonhole and use a seam sealant to reinforce the buttonhole.

Note: To adjust the density or if the sides are uneven, refer to the manual

for adjustment instructions.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Singer Macchina da cucire

Manuali Macchina da cucire popolari di altre marche

Riccar

Riccar RL634DE Manuale utente

Pfaff

Pfaff 3307-1 SERIES Manuale utente

Janome

Janome Quilt Maker Pro 18 VERSA Manuale utente

Siruba

Siruba C007JP Manuale utente

Husqvarna Viking

Husqvarna Viking Designer SE Manuale utente

IKEA

IKEA SY Manuale utente

Pfaff

Pfaff 571 Manuale utente

Brother

Brother BB370 Manuale utente

Pegasus

Pegasus WT100 Series Manuale utente

Reliable

Reliable 7100DB Manuale utente

Pfaff

Pfaff 937 Manuale utente

Pfaff

Pfaff 1471 E1 Manuale utente

Kenmore

Kenmore 16677 - Serger Sewing Machine Manuale utente

HIGHLEAD

HIGHLEAD GC2008-M Manuale utente

Brother

Brother BE-1204C Manuale utente

JUKI

JUKI MO-104 Manuale utente

Bernina

Bernina Quilting Frame Manuale utente

Brother

Brother 885-V14 Manuale utente