SinoVoip bpi BerryClip Manuale utente
Hardware manual
www.banana-pi.com BerryClip Module Datesheet
Shenzhen SINOVOIP CO., LIMITED Copyright Statement：
The document only descript the information about product however. It can not be
guarantee the product function and performance. If the document content or the
product feature and tech spec included document be changed, it will be not further
notice.
Content in the document might past due. Our cooperation can not promise update
these information.
Some information in the document might disable in your local area, that include
product and service. You can consult with contact and agency in your local area.
Copyright to the document belong to Shenzhen SINOVOIP CO.,LIMITED. User only
can use these content after he or she get authorization from our company or other
obligee. However user can not copy paraphrase or creative similar device or product.
The document final right to interpret and document be used final interpret belong
Shenzhen SINOVOIP CO.,LIMITED.
More information:
Get more product and support please contact Shenzhen SINOVOIP CO.,LIMITED
(www.banana-pi.com)
Attention:
Due to technical requirements components, please do
not hand directly connected
Touch. Core board and development system contains
static-sensitive devices. Quiet Electrical charge easily
accumulate in the human body and the device can not
detect possible Damage to equipment, it is
recommended to take anti-static measures, it is
recommended not to hand. Touch, stored in anti-static
effect devices.
Hardware manual
www.banana-pi.com BerryClip Module Datesheet
Banana Pi Expand Module Serial：
Infinity cascade IO expand module：
This module is designed specifically for the Banana Pi IO expansion modules. The
module expand 32 IO, Multiple modules can cascade, infinity cascade，infinity GPIO.
I2C GPIO expand module：
This module is designed specifically for the Banana Pi IO expansion modules. The
Module use I2C bus to connect to Banana Pi. The module expand 8 Bidirectional
GPIO and wit isolation protection function which can effectively excessive external
voltage. There are 8 I2C address, you can choose one of them through setup the
jumper. Multiple modules can cascade and maximum cascade 8 modules!
Prototype development module：
The Prototype development module is designed specifically for the Banana Pi. The
module suitable enthusiasts and user can weld peripheral to the module；The
module expand some amphenol connector and some SMT, so the user can finish
prototype test easily.
Berryclip expand module：
The BerryClip module is designed specifically for learning how to use the GPIO of
Banana Pi. There are 6 multiple color LED, 1 button and 1 Buzzer on the module.
Berryclip(DIY) expand module：
The module is not the end product, you need weld them by yourself. The function of
the module is the same as BerryClip module.
UNO compatibility module：
The module makes Banana Pi compatible with Arduino Uno and many Arduino
Shields. The module’s GPIO is the same as Arduino Uno and you can choose the
voltage of GPIO between 5V or 3V through setup jumper.
T Electric level convert module：
The module expand the GPIO of Banana Pi to breadboard. It convert 3.3V electric to
5V electric level, then the Banana Pi can connect many 5V electric level peripheral.
IO extraction module：
The module expand all of GPIO of Banana Pi to breadboard.
Hardware manual
www.banana-pi.com BerryClip Module Datesheet
Product specification
Product Overview：
The module is designed specifically for learning control the GPIO of Banana Pi. There
are 6 LED, 1 button and 1 Beep on the module; All of them can use the GPIO of
Banana Pi to control. The beginner can learn the INPUT mode of GPIO through the
key and learn the OUTPUT mode through the LED or Beep
Hardware manual
www.banana-pi.com BerryClip Module Datesheet
Product Feature：
6 multicolor LED
1 single button on board
1 Beep on board
Port：
BananaPi 2X13 port
Product Parameters：
Working voltage: 3.3V
LED max current allow 8mA
Beep max current allow 12mA
Typical Application：
Hardware beginner learning
Education
How to use：
Insert the BerryClip in the Banana Pi, Pay attention don’t make the direction reversed!
The correct direction of insert module is above the Banana Pi’s PCB.
Testbench：
Setup the GPIO OUTPUT, Output LED High level, the LED will be lighten；
Setup the GPIO INPUT, press the button;
Test finish
Example and Test Code：
#include <wiringPi.h>
#include <pcf8574.h>
int LED1[]={7,0,3,12,13,14};
int i;
int initIO()
{
pinMode(7,OUTPUT);
Hardware manual
www.banana-pi.com BerryClip Module Datesheet
pinMode(0,OUTPUT);
pinMode(3,OUTPUT);
pinMode(12,OUTPUT);
pinMode(13,OUTPUT);
pinMode(14},OUTPUT);
}
int LED()
{
for(i=0;i<=6;i++)
{
digitalWrite(LED1[i],1);
delay(500);
digitalWrite(LED1[i],0);
delay(500);
}
}
int main()
{
int val;
wiringPiSetup();
pcf8574Setup(200,0x27);
initIO();
pinMode(10,INPUT);
digitalWrite(11,1);
while(1)
{
blink();
val=digitalRead(10);
if(val==0)
{
LED();
digitalWrite(11,1);
i=0;
}
else
blink();
}
}
Indice
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
