SKF 728619 E Manuale utente

Instructions for use

Mode d’emploi

Bedienungsanleitung

Instrucciones de uso

Manuale d’istruzioni

Bruksanvisning

Gebruiksaanwijzing

Instruções de uso

使用说明书

Инструкция по эксплуатации

SKF 728619 E

Русский

Русский 76

中文

中文 68

Português

Português 60

Nederlands

Nederlands 52

Svenska

Svenska 44

Italiano

Italiano 36

Español

Español 28

Deutsch

Deutsch 20

Français

Français 12

English

English 4

4SKF 728619 E

EC Declaration of conformity ....................................................................................5

Safety precautions ...................................................................................................6

1. Description .......................................................................................................7

2. Technical data ..................................................................................................8

3. Operating instructions ......................................................................................9

4. Maintenance ..................................................................................................10

4.1 Filling the oil container ...............................................................................................10

4.2 Cleanliness ....................................................................................................................10

4.3 Replacement parts ......................................................................................................10

Table of contents

Original instructions

SKF 728619 E

EC Declaration of conformity

We,

SKF Maintenance Products

Kelvinbaan 16

3439 MT Nieuwegein

The Netherlands

herewith declare that the following product:

SKF Hydraulic Pump

728619 E

which this declaration refers to, is in accordance with the conditions of the

following directive:

Machinery Directive 2006/42/EC

and is in conformity with the following standards:

EN-ISO 12100:2010,

EN-ISO 4413

Nieuwegein, The Netherlands,

June 2013

Sébastien David

Manager Product Development and Quality

English

6SKF 728619 E

READ THIS FIRST

Safety precautions

Read this instruction for use fully. Follow all safety precautions to avoid personal

injury or property damage during equipment operation. SKF cannot be responsible

for damage or injury resulting from unsafe product use, lack of maintenance or

incorrect equipment operation. In case of any uncertainties as regards the use of

the equipment contact SKF.

Failure to comply with the following could cause equipment damage and personal injury.

• Do ensure that the equipment is only operated by trained personnel.

• Do wear proper personal protective gear, such as eye protection and protective

gloves, when operating the equipment.

• Do inspect the equipment and all accessories carefully before use.

• Do not use damaged components or modify the equipment.

• Do use clean recommended hydraulic oils (SKF LHMF 300, LHDF 900 or similar).

• Do not use glycerin or water based ﬂuids as a pressure medium.

Premature equipment wear or damage can result.

• Do not use the equipment above the stated maximum hydraulic pressure.

• Do not adjust safety valves to work at pressures above the maximum

working pressure.

• Do not extend the handle in order to reduce the required force to reach maximum

pressure. Use hand pressure only.

• Do not use the pumps with accessories, which are rated below the maximum

working pressure of the pump.

• Do use a pressure gauge to monitor the oil outlet pressure.

• Do ensure that all the air has been removed from the hydraulic system before

pressurising the hydraulic system.

• Do prevent the workpiece (e.g. bearing, gearwheel or similar item) from being

forcibly ejected upon sudden release of pressure (e.g. by use of retaining nut).

• Do not use damaged hoses. Avoid sharp bends and kinks when connecting hoses.

Sharp bends and kinks will internally damage the hose leading to premature failure.

Applying pressure to a damaged hose may cause it to rupture.

• Do not lift the equipment by the hoses or couplings.

• Do follow local safety regulations.

• Do service the equipment by a qualiﬁed hydraulic technician or SKF Repair Centre.

• Do replace worn or damaged parts with genuine SKF parts.

SKF 728619 E

1. Description

The 728619 E is a two stage pump. The pump supplies a high rate of ﬂow

(20 cm³ per stroke) below the switching pressure. Above the switching pressure the ﬂow

is automatically decreased to 1 cm³ per stroke.

A 3 metre long high-pressure hose is supplied to connect the pump to the workpiece.

One end of the hose has a quick-connection coupling for the connection to the pump.

The other end of the hose has a G 1/4” quickconnection nipple for the connection to the

workpiece.

The pump comes preﬁlled with SKF mounting ﬂuid (LHMF 300).

A 1 litre can of mounting ﬂuid is also included. These items are stored in a sturdy

metal box.

The pump has an oil outlet connection (P).

The pump also has a return connection (R), to return oil to the oil container.

The return connection can be connected to an external oil reservoir when the oil container

capacity is not sufﬁcient.

The release valve is in the pump head. The pump includes a safety valve to prevent high

pressure that can cause damage to the pump. PR

English

8SKF 728619 E

2. Technical data

Maximum pressure 150 MPa (21,750 psi)

Volume per stroke 20 cm³ (1.2 in³) below 2.5 MPa (362 psi)

1 cm³ (0.6 in³) above 2.5 MPa (362 psi)

Oil container capacity 2 400 cm³ (146.5 in³)

Pressure hose 3 m (118 in) long with quick connection

coupling

Connection nipple G 1/4” external or internal thread

Oil viscosity, mounting ﬂuid 300 mm²/s (1 400 SUS) at 20 °C (68 °F)

Weight (ﬁlled with oil) 11,4 kg (25 lb)

Handle effort 370 N (83.2 lbf)

Designation 728619 E

ACBDDimension mm inch

A 170 6.7

B 620 24.4

C 130 5.1

D 128 5.0

SKF 728619 E

3. Operating instructions

• Remove the container plug under the pump handle to check the oil level.

Make sure there is sufﬁcient oil to complete the operation. Use oil with a viscosity

at operating temperature of 300 mm²/s (1 400 SUS) to mount bearings with the

SKF Oil Injection Method or a hydraulic nut. Use oil with a viscosity at operating

temperature of 900 mm²/s (4 100 SUS) for dismounting bearings.

• Hold the pump in a horizontal position and tilt forward as necessary to make sure

the oil supply is constant.

• Screw the quick connection nipple (G 1/4) tightly into the workpiece.

• Connect the hose to the quick connection nipple. To connect or disconnect the hose

you must retract the collar on the quick connector. Do not disconnect the hose while

the oil is pressurised.

• Move the release valve to the pump position. Do not tighten the valve too much.

The release valve is found on the side of the pump.

• Operate the pump until the pressure increases to the level necessary for your

application. When the pressure is more than 150 MPa (21 750 psi), the safety valve

will open.

• Last, open the release valve to let the oil ﬂow back to the oil container.

ABA. Pump

B. Release

English

Altri manuali per 728619 E

Indice

Lingue:

Altri manuali SKF Pompa dell'acqua

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente