SKG V3 Manuale utente
V3 Smart Band
User Guide
Product Summary
Prompts:
※To make heart rate measurement more accurate, please
wear the bracelet on the wrist away from the carpal bone;
Please wear it close to the skin but not too tight.
※The bracelet and watchband are made of healthy materials,
and which can be worn safely. If you feel dis-comfortable
during wearing it for personal differences, such as skin
discomfort, please stop wearing and consult your doctor.
Contact point of
the recharging
thimble
Heart rate
Blood oxygen
sensor
Short watch band
Long watch band
Full-screen touch area
(Support to slide up, down,
left and right, and support
long press selection)
Side button
(turn the watch off by
pressing it for 3 seconds)
Enter the mode to be paired
When using the watch for the first time,
long press the power button (side button)
for 6 seconds, the watch will vibrate and
the logo will appear. Then the watch will
start up and enter the mode to be paired.
1
Download "Band V3" App
Search for "Band V3" in the app market
to download and install.
Setting and Pairing
Click the plus icon in band V3 to add
the device. Select the SKG band V3
from a nearby device.
Add device
Scanning nearby device...
Main screen operation
Slide downward for rapid setting
Slide upward for the list of functional
menu
Slide leftward, check the first small
part
Press and hold for 2s for editing the
watch face
Slide rightward, check the information
Press
Turn on, off
Press
Wake the watch up
Go back to the previous screen
Lighten the screen, turn the
screen off
2
Recharging:
If you need to charge the bracelet, place the bracelet on the
charging stand and make sure that the charging contact of the
bracelet is aligned with the metal contact of the recharging
base.
Prompts:
※If the bracelet hasn’t been used for a long time, the electricity
quantity is used up, the watch needs a long time to start
automatically;
※Before recharging, please clean up the bracelet’s contract
point, to avoid residual sweat or water.
Replacement of the watch band
Toggle the switch and press it, you can remove or install the
watch band.
Magnetic recharger
Recharging contact point
Packing List
V3 smart band/recharging base/user’s guide
3
Regulation Information
To view the relevant regulatory information, please go to set
the regulatory information about the bracelet.
Medical Disclaimer
Warning: This product is not a medical device.
This Product and its related applications are not intended to
diagnose, treat or prevent any disease or medical condition.
Always consult a medical professional before you adjust your
exercise, sleep, or nutrition schedule.
Product Parameters
Type: S9246LA
Bluetooth: Support BLE
Bluetooth frequency: 2402-2480 MHz
Bluetooth’s transmitting power: ≤10dBm(Max)
Equipment requirements: ios 11 and above or
Android 5.0 and above
Waterproof grade: IP68
Input: 5V 0.09A
Working temperature: 0℃~45℃
Storage temperature: -10~50℃
Safety and Cautions
Before using and operating the device, please read and
observe the following precautions to ensure the best
performance of the device and avoid dangerous or illegal
situations.
Routine use
• When the bracelet is actively used to measure the heart rate
or blood oxygen, please keep the wrist rest.
• Waterproof grade of this product is IP68, you can wash your
hands during wearing it, or wear it under the conditions of
sweating, rain, dust, but it can’t be worn in situations of
swimming, showering, sauna, and diving.
• The bracelet’s touch screen does not support underwater
operation, after being touched with water, it’s surface shall be
dried with a soft cloth before operation.
• Please avoid wearing tightly in daily use; Keep dry and clean
4
at the contact area between the bracelet and skin, the
bracelet shall be cleaned with water regularly. If there is
redness and swelling at the contact position, please
discontinue use it immediately and consult your doctor.
Electronic equipment
In the places wherethe use of wireless devices have been
expressly forbidden, do not use this device, otherwise it will
interfere with other electronic equipment or cause other
dangerous.
Safety of the battery
• Keep the recharging base and device being in a dry
environment when recharging; Do not touch the recharging
base with your hands. Do not immerse the recharging base
with water or other liquids.
• Do not disassemble or modify the battery, insert foreign
matter, or immerse the battery in water or other liquids to
avoid battery leakage, overheating, fire, or explosion.
• Do not drop, squeeze, or puncture the battery. Do not
expose the battery to excessive external pressure, which may
cause internal short circuit and overheating.
• The device is equipped with a non-removable built-in
battery. Do not replace the battery by yourself to avoid
damage to the battery or the device. The battery can only be
replaced by authorized service centers.
• Please dispose of the battery according to local instructions.
Do not dispose of the battery as household garbage.
Repair and maintenance
• Before cleaning and maintaining the device, stop using of
the device, close all applications, and disconnect all
connections or cables from other devices. Use a clean, dry,
soft cloth to wipe the device and its accessories. Do not use
strong chemicals, cleaning agents or strong detergents to
clean the equipment and its accessories.
• Do not touch magnetic stripe cards (such as bank cards and
phone cards) with the device for a long time. Otherwise, the
magnetic stripe cards may be damaged by magnetic fields.
Operating environment
• Please use the equipment in the temperature range of 0
℃~45℃, and store the equipment and its accessories in the
temperature range of -10℃~50℃. When the ambient
temperature is too high or too low, the device may be faulty.
When temperatures are below 5℃, battery performance may
be limited.
Transportation safety
• Wireless devices may interfere with the flight system of the
aircraft: Please comply with the relevant regulations of the
airline and do not use this device where the use of wireless
devices is prohibited
5
6
Access and Information Safety
Go to the "Band V3" App and click "Mine > Settings > About"
Band V3 "to view the user agreement, privacy statement, etc.
Disclaimer
This product is not a medical device and should not be used as
a substitute for professional medical judgment. It is not
designed or intended for use in the diagnosis of disease or
other conditions, or in the cure, mitigation, treatment, or
prevention of any condition or disease. Please consult your
healthcare provider prior to making any decisions related to
your health.
EU Declaration of Conformity (DoC)
Hereby, SKG, declares that this device is in compliance with
the essential requirements and other relevant provisions of
Radio Equipment Directive 2014/53/EU.
The declaration of conformity may be consulted at
https://global.skg.com
Battery warning
The built-in lithium battery of the product is forbidden to be
disassembled, impacted, extruded or put into fire. The battery
under the very low air pressure may result in explosion or
flammable liquid or gas leakage. Avoid the battery in a
high-temperature environment or being exposed to strong
sunlight to avert explosion. Don't use the battery continuously
in case of serious ballooning. The battery shall be handled
pursuant to the local regulations and shall not be disposed as
household garbage. Don't try to repair, remove or refit the
battery. The explosion may happen if the battery is replaced
by the one subject to incorrect model. Don't compress or
puncture the battery with hard object. The battery leakage,
overheating or outbreak of a fire may occur if the battery is
destroyed.
7
This symbol (with or without a solid bar) on the device,
batteries (included), and / or the packaging, indicates that the
device and its electrical accessories (for example, a headset,
adapter or cable) and batteries should not be disposed of as
household garbage.
Thank you for purchasing SKG Products. If any manufacturinng
defect problems occur within 12 months from the date of
purchase, user can enjoy our our company's warranty service.
Warning
Disposal and Recycling Information
1. When you buy the product, the sales unit will issue a valid
proof of purchase.
2. The warranty card and the proof of purchase should be kept
by the user properly, and it will not
be replaced if lost.
3. If the product fails due to non-human factors, the user can
present the warranty card and proof of purchase to the SKG
customer service center for free maintenance during the
warranty period.
Matters Needing Attention
To avoid the potential effects on the environment and human
health as a result of the presence of hazardous
substances in electrical and electronic equipment, end users of
electrical and electronic equipment should
understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted
municipal waste and have to collect such WEEE separately.
Old electrical appliances must not be disposed of together
with the residual waste, but have to be disposed of separately.
The disposal at the communal collecting point via private
persons is for free. The owner of old appliances is responsible
to bring the appliances to these collecting points or to similar
collection points. With this little personal effort, you contribute
to recycle valuable raw materials and the treatment of toxic
substances.
8
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation
is subject to the condition that this device does not cause
harmful interference.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
The device has been evaluated to meet general FCC&IC RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
Use only the supplied or an approved antenna.
Indice
Lingue:
