SKMEI 1100 Manuale utente
SKMEI (Model 1100) DIGITAL WATCH INSTRUCTIONS
Four buttons on this watch are known as: LIGHT, MODE, RESET, and START
TO SELECT THE DISPLAY MODE
Push the Mode Button in order to select one of the following four display modes in the following
order: Normal Time -> Stop Watch -> Alarm Set, -> Time Reset
In the Normal Time Mode, the Day of Week, the Hour, Minute and Second are displayed (none
flash). If the alarm icon at the bottom left is displayed, the alarm is turned on.
TO DISPLAY THE DATE
In Normal Time Mode, Press the START button.
TO DISPLAY THE ALARM TIME
In Normal Time Mode, push the RESET button.
A P indicates PM, an A indicates AM. H indicates a 24 hour clock.
If the time is set as a 24 hour clock, the alarm will also show only as 24 hours with a H.
TO STOP/START THE ALARM
In Normal Time Mode, hold the RESET button while pressing the START button to toggle the Alarm
icon on and off.
TO STOP/START THE HOURLY CHIME
In Normal Time Mode, hold the RESET button while pressing the MODE button to toggle the hourly
chime on and off. When all the days of the week are displayed, the hourly chime is on.
LIGHT
START
MODE
RESET
TO SET THE TIME
Press the MODE button x 3 until the hour is flashing.
To set the Minute press the RESET button x 1. Press the START button to increase the minutes.
Press the RESET button again to toggle through Hours -> Date -> Month -> Day of Week -> Seconds
Press the START button to increase the setting you are on.
TO SET THE ALARM
Note: The alarm is turned on every time the Alarm is set.
Press the MODE button x 2 until the hour is flashing.
Press the START button to increase the hours
Press the RESET button to select minutes.
Press the START button to increase the minutes
A P indicates PM, an A indicates AM. H indicates a 24 hour clock.
If the time is set as a 24 hour clock, the alarm will also show only as 24 hours with a H.
Press the MODE button to finish and return to the time.
TO USE THE STOP WATCH
Press the MODE button x 1
Press the START button to start timing.
Press the RESET button to reset the stop watch to zero.
To record a LAP time, press the RESET button when the stop watch is running. Press RESET again to
return to the live stop watch.
Indice
Altri manuali SKMEI Orologio
SKMEI
SKMEI 2045 Manuale utente
SKMEI
SKMEI 1096 Manuale utente
SKMEI
SKMEI 1834 Manuale utente
SKMEI
SKMEI 1554 Manuale utente
SKMEI
SKMEI 1060 Manuale utente
SKMEI
SKMEI 1123 Manuale utente
SKMEI
SKMEI L28T Lefit Manuale utente
SKMEI
SKMEI 8 Manuale utente
SKMEI
SKMEI 1464 Manuale utente
SKMEI
SKMEI 1343 Manuale tecnico
SKMEI
SKMEI 1525 Manuale utente
SKMEI
SKMEI 1301 Manuale utente
SKMEI
SKMEI 1360 Manuale utente
SKMEI
SKMEI 1667 Manuale utente
SKMEI
SKMEI 0966 Manuale utente
SKMEI
SKMEI 1500 Manuale utente
SKMEI
SKMEI 1746 Manuale utente
SKMEI
SKMEI 1077 Manuale utente
SKMEI
SKMEI CRH 123 Manuale utente
SKMEI
SKMEI 1475 Manuale utente
