SKP Pro Audio DMP-3006iP Manuale utente

This symbol is to alert the user to important operating and maintenance (service )

instructionsin this manual and literature accompanying the product.

This symbol isto alert theuser to thepresence of uninsulated dangerous voltages

inside the product's enclosure that may constitute a risk of electric shock.

Note:

1. Important safety instructions shall be provide with each appliance. These safety instructions may be in

the form of a separate booklet, separate sheet, or part of the instruction manual.

2. If included in the instruction manual, the safety instructions shall be located before any operating

instructions.

3. These instructions shall be entitled "IMPORTANT SAFETY INSTRUCTIONS" .

4. The safety instructions shall include, as applicable to the particular apparatus, the in formation and

warnings listed before. The wording is capable of being supplements, although not replaced, by drawing

or cartoons.

5. The symbol shall be shown adjacent to the text of Important Safety Instructions.

WARNING: CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE

PARTY RESPONSIBLE FOR COMPLIANCE WILL VOID THE USER'S AUTHORITY TO

OPERATE THE EQUIPMENT. ANY CHANGE TO THE EQUIPMENT WILL VOID FCC GRANT.

CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS

TO RAIN OR CORDS. IF THIS HAPPENS, BE SURE POWER TO THE ELECTRICAL OUTLET IS

TURNED OFF BEFORE YOU TOUCH OR UNPLUG THE APPLIANCE.

against harmful interferencein a residentialinstallation. This equipment generates, uses and can

radiate radio frequencyenergy and, ifnot installed andused in accordancewith the instructions,

may cause harmfulinterference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radioor television reception, which can bedetermined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or moreof the following

measures:

--Reorient or relocatethe receiving antenna.

--Increase the separationbetween the equipment and receiver.

--Connect the equipmentinto an outlet on a circuit different from that to which the receiver is

connected.

--Consult the dealeror an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference,and (2) this device must accept

any interference received,including interference that may cause undesired operation.

This equipment has been tested and found to comply with thelimits for a Class C digital device,

pursuant to part 15 of the FCC Rules. These limits aredesigned to providereasonable protection

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS

INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Caution Marking Explanation

Outdoor Use and Wet Location Warning

IMPORTANTSAFETY PRECAUTIONSIMPORTANTSAFETY PRECAUTIONS Player

Getting your system ready for use

Choose an area away from heat. Allow about three(3) inches between the cabinet back and the wall for

proper ventilation. Place your system near an AC outlet supplying common household current (105-120V

AC60Hz).

Grounding or polarization

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades

with onewider than the other. A grounding type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

Power cord protection

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Carts and stands

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When acart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Therefore:

1. Never block the ventilation openings of a unit by placing it on a bed, soft rug, etc.

2. Never place a set in a built-in enclosure unless proper ventilation is provided.

3. Never cover the opening with cloth or other material.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (inclu-

ding amplifiers) that produce heat.

To avoid personal injury:

1. The manufacturer recommends that this unit not be mounted on a wall or ceiling.

2. Carefully follow the operating instructions when making connections.

3. Do not insert tools, hands, or fingers in openings (such as a tape slot), especially if the unit is connected

to a power source.

WARNING

Do not turn on your stereo system with the volume at maximum.

This will damage your speakers and void you warranty.

Installation

* Operate the unit only from a power source as indicated on the unit or in the operating instructions.

* Overloaded AC outlets and extension cords are dangerous and so are frayed cords and broken plugs.

Call your service technician for replacement of such cords and plugs

* Audio products are provided with ventilation openings to allow heat generated during operation to be

relesed. If these openings are blocked, heat build-up within the set can cause failure which may result in

a fire hazard.

Safety Instructions

IMPORTANTSAFETY PRECAUTIONS Player

IMPORTANTSAFEGUARDS

1. READ INSTRUCTIONS- All the safety and operating Instructions should be read before the product is

operated.

2. RETAIN INSTRUCTIONS- The safety and operating Instructions should be retained for future reference.

3. HEED WARNING- All warnings on the appliance and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

Cleaning

The appliance should be cleaned only as recommended by the manufacturer.

Non-use periods

Unplug this apparatus during lightning storms or when unused for long periods of time.

Object and liquid entry

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through

Damage requiring service

The appliance should be serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain.

D. The appliance does not appear to operate normally or exhibits a marked change in performance.

E. The appliance has been dropped; or the encolsure damaged.

Servicing

Do not attempt to service the appliance beyond that which is described in the operating instructions. All

other servicing should be referred to qualified service personnel.

openings.

IMPORTANTSAFETY PRECAUTIONS

Water and Moisture

The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink,laundry

tub, in a wet basement or neat a swimming pool and the like.

Player

20 2122 23 24

REFERENCE DRAWING FORFRONT PANEL

FRONT PANEL FUNCTION

Player

1.CD/IPOD

Select to CD or IPOD.

MENU BUTTON

Press to enter or exit the menu.

3.SCROLL BUTTON

Use this button to select the last item of

menu.

4.SCROLL BUTTON

Use this button to select the next item of

menu.

5.ENTER BUTTON

Press this button to enter what you select.

PLAY LIST BUTTON

Press this button to select last play list.

7.PLAY LIST BUTTON

Press this button to select next play list.

8.LED(PITCH RANGE)

9.PITCH SYSTEM

10.SEARCH BUTTON

When you push this button, you en-

able change the jog and the search

function.

11.TIME BUTTON

Use this knob to choose the time mode :

Elapsed time, remaining time or total

remaining time.

12.SINGLE/CONT.

Press these to switch between the SI-

NGLE and CONTINUOUS play mode.

The selected mode is indicated on the

LCD. In SINGLE mode, after each track,

the unit stops the reading. In CONTINOUS

mode, the unit reads all track and stops

13.PITCH BEND +

The pitch will automatically rise when the

+ button is pressed and return to the original

pitch when it is released.

14.PITCH BEND -

REFERENCE DRAWING FORFRONT PANEL Player

The pitch willdrop while the -button is pressed and return tothe original pitch when

it is released.

15.IN BUTTON ( LOOP SYSTEM )

This button sets the beginning of the loop. The Loop indicator on the display flashes

16.OUT BUTTON ( LOOP BUTTON ).

When you pressthis button, you set the end point of theseamless loop and you start the loop.

To finish theloop, press again this button.

17.PROG BUTTON

In STOP mode, you canprogram several tracks( 20 tracks max ) :

-Press theSTOP button to enter inthe stop mode

-Press thePROG button to enter in the program mode

-Use theskip track buttons to choose the track you wantto listen then press the PROG button

to enter yourchoice.

-Use onemore time the skip track buttons to choose thetrack you want to listen then press the

PROG button toenter your choice.

-Repeat theoperation to select all the track you want tolisten

Press the PLAY/PAUSE button to startthe playback

18.RELOOP BUTTON ( LOOP SYSTEM )

This button is used to start the last saved loop. To finish the loop, press the reloopbutton.

19.DISPLAY

20.

+10 BUTTON

Use this buttonto jump of 10 tracks in one press.

23.

Use this buttonto repeat one track or all the track ofthe CD.

25.STOP BUTTON

Press this buttonto stop the playback.

26.JOG & SHUTTLEWHEELS

Shuttle : Use thedial to select the scanning direction and speed. The disc is scanned in the

forward direction whenthe shuttle dial is turned clockwise from the neutralposition, in the

reverse direction whenthe shuttle dial is turned counterclockwise. The scanning speeds up

when the shuttledial is turned faster.

Jog : Inpause mode, if you turn the jog, the pointat which the sound is being produced moves

by a numberof frames corresponding to the number of clicks. Clockwisemoves the point forward,

counterclockwise moves thepoint backward. In play mode, the jog increases ordecreases the

speed of thesong. ( clockwise : increase , counterclockwise : decrease).

27.PITCH CONTROL

Use this faderto increase or decrease the speed of the CD track or tone in iPOD.

28.CUE BUTTON

Pressing the CUEbutton during play provides a return to the positionat which play was started

29.PLAY / PAUSE BUTTON

Each time youpress the PLAY/PAUSE button, the operation changes from play to pause or

from pause toplay.

30.OPEN/CLOSE

Press to loador eject disk. Each press will open or closethe disk tray.

NOTE: disc holderwill not open unless stop or pause button hasbeen pushed fir.

SKIP BUTTON

Use this buttonto select the last track.

21. SKIP BUTTON

Use this buttonto select the next track.

22.

IPOD JACK

Use to connect with the IPOD.

24.REPEAT BUTTON

REFERENCE DRAWING FORREAR PANEL

REAR PANEL FUNCTION

1. POWER BUTTON

Press the power switch to turn the unit on. To switch the power off press the power

switch again.

2. ACCORD

Use this cableto connect the AC mains power to the unit.

3. POWER SUPPLY SWITCH

Use this selectorto choose the good Power supply (several countries haveanother power

supply).

4. USB

Connect to theUSB.

5. VIDEO

6. AUDIO OUT

The audio for each CD player is an output for thesejacks. Connect to the line input of the mixer.

Player

WARRANTYCONDITIONS

DMP-3006iP equipment is covered

by a 6 monthswarranty on parts and labour except for

Crossfaders (90 days).

The following rulesapply from theday the equipment leaves the factory:

The date onthe invoice is considered to be the date thewarranty begins.

Only companies approvedby DMP-3006iP are allowed towork on theequipment. Warranty

becomes void whenother service technicians open the equipment.

During warranty period,defective equipment must be sent by pre-paid mail inthe original box.

DMP-3006iP will return thegoods by pre-paid mail during the first year ofwarranty; thereafter

the mailing costis to be paid by the recipient

Potentiometers have alimited lifetime and are not covered by the manufacturerfor more than

normal use.

For all serviceenquiries, refer to your local distributor, as heis best ableto help you.

SPECIFICATIONS :

Anti-Shock Buffer Memory : 40seconds

Range of adjustments: +/- 12%

Power supply : 115 / 230V 50/60Hz

Power Consumption : 25 Watts

Dimensions : 260x217x112mm

REFERENCE DRAWING FORWARRANTY Player

Indice

Lingue:

Manuali Lettore MP3 popolari di altre marche

Blaupunkt

Blaupunkt Compact Drive MP3 Manuale utente

Memorex

Memorex MMP9008 - 8GB USB 2.0 Manuale utente

Meizu Electronic Technology

Meizu Electronic Technology E5 Manuale utente

Naxa

Naxa NMV-173NX Manuale utente

Philips

Philips PSA250 Manuale utente

Zipy

Zipy go! Waving Manuale utente

Sylvania

Sylvania SMPK4068 Manuale utente

Sony

Sony NW-MS7 - Memory Stick Walkman Manuale utente

Irradio

Irradio RF-42UC Manuale utente

NABAIJI

NABAIJI SWIM MUSIC 100 Manuale utente

Laser

Laser MP3-A9-4GB Manuale utente

Samsung

Samsung YP-T7F Manuale utente

Savant

Savant SMS-1001-00 Guida di riferimento rapido

Trevi

Trevi XP 71 BT Manuale utente

AGPtek

AGPtek C2 Manuale utente

MobiBlu

MobiBlu DAH-1500i Manuale utente

Denver

Denver MPS-201 Manuale utente

Steren

Steren MP3-002 Manuale utente