SkyBell HD Manuale utente
Syncing the SkyBell (Android)
Step 1
•Open the SkyBell app from your smart device
home screen.
•Tap the Sign in button.
Step 2
•Enter your SkyBell account email address.
•Enter your SkyBell account password.
•Tap the Sign in button.
Step 3
If there is no SkyBell device attached to your account
(which is the case, if you have just created your
SkyBell account), you will see the following screen:
•Tap the Continue button at the bottom of the
screen.
If you do not see the Add a SkyBell screen, do the
following:
•Tap the Account button. The screen below will
be displayed.
•Under the MY DEVICES section, tap the
+ Add New SkyBell button. This will take you
to the correct screen.
•Tap the Continue button at the bottom of that
screen.
Step 4
Put the SkyBell device into Sync Mode. The
SkyBell device is in Sync Mode when the LED is
blinking red / green.
•If your SkyBell device is already in Sync Mode
(LED blinking red / green), tap the Continue
button at the bottom of the screen.
•If not, press & hold the SkyBell device's
button (for approximately 15 seconds) until
the LED blinks green rapidly, then release the
button. Approximately 5-10 seconds after the
LED starts blinking green the LED will change
to blinking red / green. Then, tap the Continue
button at the bottom of the app screen.
Step 5
In Sync Mode the SkyBell device creates a
temporary ad-hoc Wi-Fi network. The SkyBell app
connects to this Wi-Fi network to configure the
SkyBell device. Connect to the SkyBell device's
Wi-Fi network by following these simple steps:
•Navigate to your smart device's Wireless &
Networks Settings screen by pressing the
navigation icon button at the bottom of the
screen.
A similar screen to the one below will be
displayed.
Step 6
•Enable Airplane mode by tapping the toggle
control.
•Return to the SkyBell app by pressing the Back
button on your smart device.
Step 7
•Tap the Continue button at the bottom of the
screen.
Step 8
•Navigate to your smart device's Wi-Fi Settings
screen by tapping the navigation icon button
at the bottom of the screen.
Step 9
•Enable your smart device's Wi-Fi function by
tapping the Use Wi-Fi toggle control.
Step 10
A similar screen to the one below will be
displayed.
•Tap the SkyBellHD_XXXXXXXX network. The
numbers after SkyBellHD_ will be different to
the ones shown.
This will connect your smart device to the SkyBell
device's Wi-Fi network.
Step 11
A similar screen to the one below will be
displayed.
•Verify that the SkyBellHD_XXXXXXXX network
is selected (at the top of the screen). The
status of this network will be shown as
Connected, no internet.
•Return to the SkyBell app by pressing the Back
button on your smart device.
Your device may display a notification that the
Wi-Fi network has no internet access. This is
normal and expected at this point in the syncing
process.
Please ignore this notification.
•As stated in Step 11, return to the SkyBell app
by pressing the Back button on your smart
device.
Step 12
•Tap the Continue button at the bottom of the
screen.
A similar screen to the one below will be
displayed.
Step 13
•Select your home Wi-Fi network by tapping on
the appropriate network name.
•Tap the Continue button at the bottom of the
screen.
Step 14
•Enter your home Wi-Fi network password,
allowing your SkyBell device to connect to
your home Wi-Fi network.
Step 15
•Tap the Continue button.
Step 16
You can now turn off Airplane mode to return
your smart device to its previous configuration.
•Again, navigate to your smart device's
Wireless & Networks Settings screen by
pressing the navigation icon button at the
bottom of the screen.
A similar screen to the one below will be
displayed.
Step 17
•Disable Airplane mode by tapping the toggle
control.
•Return to the SkyBell app by pressing the Back
button on your smart device.
Step 18
The screen below will be displayed.
•Tap the Thumbs Up icon button at the bottom
of the screen.
Step 19
Once the SkyBell device has been successfully
configured, the LED will change from blinking
orange rapidly to blinking blue / green, and
finally to solid green.
The SkyBell automatically enters Call mode
showing the live video stream from the camera.
•Tap the red Hang-up icon button to end the
live-call stream.
Congratulations!
You have successfully set up your SkyBell.
Altri manuali per HD
1
Altri manuali SkyBell Accessori
