Sleepnet MOJO Manuale utente

SleepNet Corporation · 5 Merrill Industrial Drive, Hampton, NH USA 03842

1-603-758-6600 · Toll Free (800) 742-3646 USA and Canada

Fax 1-603-758-6699 · www.sleep-net.com

91007 Rev. C

MOJO FITTING TIPS

5. If the tensioning screw will no longer turn and there are still leaks at the

bridge, turn tensioning screw clockwise to original position; tighten forehead

straps; and turn tensioning screw counter clockwise until leaks are gone.

4. Connect mask to airway pressure device tubing, and turn unit on. If there are

leaks at the bridge, turn the tensioning screw counter clockwise until leaks

are gone. This will divert the force of the upper straps, down to the top of the

mask shell, and into the bridge.

1. The mask shell can be reshaped to follow the contours of the patient's face. If

the mask has been shaped previously, return to the original shape by holding

the mask with your thumbs inside the shell, parallel, and bend the wire

outward until the shell resembles a triangular pear and the sealing surface of

the gel is nearly flat.

2. Turn the mask around (elbow towards you) and rotate the tensioning screw

clockwise as far as it will easily turn. Bend the forehead pad flat.

3. Assemble the mask to the headgear, as indicated in product instructions. Put

on mask assembly; center the mask on the face, with the top of the gel at the

indent on the nose bridge between the eyes, and the bottom at the indent

below the lips. Center the headgear on head and assist with strap

adjustments; adjust to secure the mask in place, but do not overtighten. Bend

the forehead pad to fit against forehead.

SleepNet Corporation · 5 Merrill Industrial Drive, Hampton, NH USA 03842

1-603-758-6600 · Toll Free (800) 742-3646 USA and Canada

Fax 1-603-758-6699 · www.sleep-net.com

TROUBLE SHOOTING

If the tensioning screw wheel has unscrewed from its

post, it can be re-screwed into place. Hold the mask shell with

your thumb inside the shell, pressed against the base of the post;

grasp the dual beam element with your fingers, as illustrated, and

replace the tensioning screw inside its slot, perpendicular to the

post. Turn the screw clockwise until it threads on the post.

6. Leaks are eliminated by applying moderate pressure along

the embedded wire to bend the mask shell to match their

facial contours and reduce air leaks. Adjust straps and mask

shell as needed.

When bending the mask shell, support the opposite side of

the mask so that adjustments only affect a specific part of

the shell.

7. If necessary, pull the mask away from face and reset on face; move mask

higher or lower; adjust strap lengths or upper strap position through headgear

frame.

Retaining Clip

Elbow Assembly Lip CORRECT

Not all Mojo masks feature a retaining clip. If your mask

does feature a retaining clip, and the mask elbow has

come off the mask: you will need to re-insert the retaining clip

between the mask shell and the lip of the elbow assembly. Cup the

mask shell in your hands and support the mask elbow and swivel

with your fingers. Use your thumbs to press the retaining clip under

the lip of the elbow assembly, inside the mask shell. Ensure the clip

is secure between the lip of the elbow and the mask shell. If the

elbow assembly can rotate without popping out, then the retaining

clip is correctly in place.

Indice

Altri manuali Sleepnet Prodotto respiratorio

Sleepnet

Sleepnet Veraseal 2 Manuale utente

Sleepnet

Sleepnet MiniMe 2 Manuale utente

Sleepnet

Sleepnet Veraseal 3 Manuale utente

Sleepnet

Sleepnet Veraseal 3 Manuale utente

Sleepnet

Sleepnet Phantom 2 Manuale utente

Sleepnet

Sleepnet Ascend Manuale utente

Sleepnet

Sleepnet Mojo 2 Manuale utente

Sleepnet

Sleepnet Aura Manuale utente

Sleepnet

Sleepnet Phantom Manuale utente

Sleepnet

Sleepnet V3 Manuale utente

Sleepnet

Sleepnet MiniMe 2 Manuale utente

Sleepnet

Sleepnet IQ Manuale utente

Sleepnet

Sleepnet Innova Manuale utente

Sleepnet

Sleepnet Ascend Nasal Vented Mask Manuale utente

Sleepnet

Sleepnet MOJO 55045 Istruzioni per il montaggio

Sleepnet

Sleepnet iQ 2 Manuale utente

Sleepnet

Sleepnet IQ Manuale utente

Sleepnet

Sleepnet IQ StableFit 50655 Manuale utente

Sleepnet

Sleepnet Ascend AIR gel Manuale utente

Sleepnet

Sleepnet Veraseal 3 Manuale utente

Sleepnet

Sleepnet Veraseal 3 Manuale utente

Sleepnet

Sleepnet Mojo 2 Manuale utente

Sleepnet

Sleepnet Ascend Manuale utente

Sleepnet

Sleepnet Innova Manuale utente

Manuali Prodotto respiratorio popolari di altre marche

3M

3M 7000 Series Manuale utente

Omron

Omron COMP A-I-R NE-C801 Manuale utente

CERES

CERES nosko nebulizer kit Manuale utente

Dr.Frei

Dr.Frei NE-SM1 Manuale utente

North

North 5400 series Manuale utente

John Bunn

John Bunn Neb-u-Lite LX2 Manuale utente

DeVilbiss

DeVilbiss UltraNeb Manuale utente

Sperian

Sperian Panther Hip-Pac P9684 Series Manuale utente

Dräger

Dräger X-plore 6570 Manuale utente

3M

3M 8000 Series Manuale utente

Respironics

Respironics SideStream HS860 Manuale utente

Sundstrom

Sundstrom SR 500 Manuale utente

JARDIBRIC

JARDIBRIC KPBRU20 Manuale utente

Ombra

Ombra 63506 Manuale utente

Lotus

Lotus M-9520A Manuale utente

Philips

Philips Respironics EE Leak 1 AF541 Manuale utente

EVOLU

EVOLU Nano AiR MINI Manuale utente

Ambu

Ambu SPUR II Manuale utente