SLIK PRO 400DX Manuale utente
Carrying the Tripod Setting up Pan Head mounting.post
(S)
Prohibited LtCaution
Carrying a tripod with a
camera
left
on can Prevent accidental equipment fall, or tripod tip-
(S)
Prohibited
PRO
400DX
Operating Instructions
Congratulations on the purchase
of
a SLiK PRO 400DX Tripod.
The
SLIK
Corporation has
designed
your
tripod to
be
a sturdy,
rugged, dependable product that will provide you with many years
of
satisfactoryuse.
Please take a
few
moments to read this instruction sheet carefully so
you can take full advantage
of
yourTripod's manyfine features.
Retain this instruction sheet in case you might want to refer backto it.
LtCaution
This caution icon refers to information pertaining to important safety
procedures in preventing injuries, and damages which may occur as
a result
of
mishandling this product.
(S)
Prohibited
This prohibited icon refers to information pertaining to prohibited con-
tents. Please refer to instructions closely to avoid accidents.
D393E-1
Specification
Length folded 650mm
(257/12")
Max. operating height 1,550mm
(61")
Max.
center
celumn
ext.
280mm
(11")
Weight 2.52kg
(5lbs
9 oz
Components
Pan Head
Center
Cl>!umn
Main Body
Soft Grip
Leg Lock Lever
Rubber Leg Tip
CenterColumn
Lo~king
Co_I_la_r
____
.....
3-Position Leg Angle
Adjustment
L~~
Leg
"Lower part
of
Center Column
Base Stopper
Lock
Q!.Iick Release Platform
Quick Release
Lock Lever
Pan Tilt Handle
Handle Conn,ecting
Screw
Camera
~
Vertical Tilt Hand!
Mounting Win Nut
Pan Head
Options
THREAD ADAPTER SET
U3/8
H
E]11mm
8mmt~
II
(1/3")La
(5/12")
On this tripod, please buy Thread
Adapter Set when the Pan Head
that there are large screw
(US/B)
tripod
installation
screws
is
attached.
Equipment that can be
used with this Tripod
(S)
Prohibited
This product has been designed
to
handle
equipment
weighing
under5 kgs
(11
Ibs).
Do not overload.
Some equipment weighing under
5 kgs
(11
Ibs), such as long lens-
es,
may
not balance well due to
its
weight
distribution.
In
such
case, please use a largertripod.
Install the Handles Storage
Washer Ring
Attach the two Pan Handles to the Pan Head, by inserting the shorter Remove the Vertical Tilt Handle from the Pan Head, and screw into the
handle to the left, and the longer handle to the right.
Do
not reverse. back
of
the Pan & Tilt Handle.
Make sure the washer ring on the thread stays on with the handle.
Attaching the camera to the Quick Release Platform
To remove the Quick Release Platform from the Pan Head, turn Quick Align the length of the Platform along the base
of
the camera body, and
Release Lock Lever and lift out Platform from its back. securelytighten the Mounting
Wing
Nut.
.
LtCaution
When attaching the camera
to
the Pan Head, check
to
make sure that the The Quick Release Platform can be attached
to
the camera body
in
either
Quick Release Platform
is
engaged
in
the catch of the Pan Head before directions (along the length, or along the width).
locking the lever. This feature facilitates your camera set up into the vertical position, simply
bythe turn of one of the tilt handles.
------~.--
--.~--
Using the Pan Head
Using
the
Pan
Head
(Continued)
Loosen the Vertical Tilt Handle, and the level can be adjusted.
LtCaution
When loosening either the
Pan
&
Tilt
Handle, or the Vertical
Tilt
Handle, take
precaution
by
keeping a firm grip on the handle until the Pan Head
is
locked
down.
Removing
the Head
from
the Center
Column
Use the following instructions if you wish to change heads,
or
attach Set the new head,
or
accessory on the tripod's threaded post, and turn
accessories. clockwise until itcomes to a stop.
First, lock the Panning Lock Knob, then grasp the Pan,
or
Vertical Tilt Tighten the Panning Lock Knob and turn clockwise slightly more.
Handle and turn the head, counter-clockwise to loosen.
----
.......
_----_
......
_---
Three
Position
Adjustable
Legs
To
change the angle of
each
leg,
close the
Leg
slightly, and then pull the
Leg
Angle Adjustment Lock
out.
There
is
achoice oftwo otherangle positions.
After choosing the desired leg angle, securely push
in
the Adjustment
Lock.
How
to
get
low
level
shots
Extending/Folding of
Tripod
Legs
Using the Center Column
Center Column
locking
Collar
Center Column Stopper
Hold onto the Pan Head with one hand, and
loosen the Center Column
locking
Collar with
the other hand.
Raise or lower Pan Head to desired height, and
while maintaining a hold of the Pan Head, tight-
en the
locking
Collar.
~Caution
(S)
Prohibited
You may injure your hand
by
a sudden fall,
if
you let go
of
the Pan Head before locking the
Collar.
Turn the
locking
Collar with your fingers on the
side of the Collar.
To avoid unnecessary camera vibrations, try to
keep the Center Column height to a minimum.
Also use the larger legs first, when extending
the legs.
Inverting the Center Column
Remove the Pan Head when inverting &/or Remove the center column Base Stopperturning
loosen
the Center Column Stopper and the
replacing the Center Column. to the wayof arrow.
locking
Collar, and then pull out the Center
Column.
Insert the Center Column from the lower side of
Main Body, and tighten the
locking
Collar and
the CenterColumn Stopper.
~Caution
Make sure to re-attach the Base Stopper, in
order to prevent the Center Column from falling
out.
By
inverting the Center Column, it is possible to
do copy, and close
up
work.
Care of the Tripod
•
DO
NOTapply anygrease or oil to this product.
• Clean with a mild detergent and a soft cloth only.
•
DO
NOT use close
to
flame. Avoid extreme heat.
Indice
Altri manuali SLIK Accessori per fotocamere
SLIK
SLIK SH-736HD Manuale utente
SLIK
SLIK Monopod 350AF Manuale utente
SLIK
SLIK PRO 500HD Manuale utente
SLIK
SLIK THE PROFESSIONAL 616-850 Manuale utente
SLIK
SLIK Slim-Pod II Manuale utente
SLIK
SLIK The Professional Manuale utente
SLIK
SLIK Sprint 150 Manuale utente
SLIK
SLIK Pro 724DX Manuale utente
SLIK
SLIK DST-3 Manuale utente
SLIK
SLIK Video Sprint II Manuale utente
SLIK
SLIK PRO 330AF Manuale utente
SLIK
SLIK PRO 700DX Manuale utente
SLIK
SLIK PRO 500DX Manuale utente
SLIK
SLIK Pro 634CF Manuale utente
SLIK
SLIK PRO 330DX Manuale utente
SLIK
SLIK SH-806E Manuale utente
SLIK
SLIK Pro 723AF Manuale utente
SLIK
SLIK Pro330DX Manuale utente
SLIK
SLIK PRO 723EZ Manuale utente
SLIK
SLIK PRO 634EZ Manuale utente
