SMARSECUR ES-K1A Manuale utente
www.smarsecur.com
ES-K1A
Wireless Keypad
EN
2
Foreword
Thank you for purchasing the ES-K1A. The ES-K1A is a keypad that enables you to arm
and disarm your alarm system, or arm it inHome Mode.
Before entering your home, all you need to do is to type your passcode and press the
Disarm button [ ], or swipe the RFID tag (sold separately) in front of the RFID reader
to disarm the system.
Box Content
Keypad x 1
AAA 1.5V batteries x 3
Screws x 4
Documentation
3
Appearance
RFID reader1LED indicator
Arm / Unlock
Disarm
Home Mode /
Unlock
SOSKey
1RFID tag (125 KHz) sold separately.
The keypad supports up to 50 RFID tags.
Refer to the instructions on page 9 of this
manual to learn how to register an RFID tag
in the keypad. RFID Tag
4
Rear cover
Battery compartment
Tamper switch
5
Preparation Before Use
How to turn the ES-K1A on
strip.
1. Unscrew and open the case.
2. Insert the batteries according to the positive and negative signs.
3. Close the case and screw it back.
Remark
Because of the tamper switch, opening the rear cover of the keypad when the latter
is on triggers the alarm. In such case, stop the alarm by disarming the system, as
explained in page 10 of this manual.
6
Installation
1. Unscrew the case and openit.
2. Screw the rear cover to a door frame or to a wall.
3. Fasten the front cover of the keypad to the rear cover and screw them together.
Remark
Because of the tamper switch, opening the rear cover of the keypad when the latter
is on triggers the alarm. In such case, stop the alarm by disarming the system, as
explained in page 10 of this manual.
7
Setup
The ES-K1A operates under 4 modes.
Normal mode
The LED indicator blinks once every 5 seconds.
Sleep mode
Under Normal mode, the keypad switches to Sleep mode if no operation is made for
35 seconds. Press the Arm [ ] or Home Mode [ ] keys to exit Sleep mode. When the
RFID Reader mode
Under Normal mode, press [*] on the keypad to activate the RFID reader for 10
Setup mode
To enter Setup mode, switch to Normal mode and then enter [your admin code + #]
on the keypad. The LED indicator blinks once every second. Press [*] to exit the Setup
mode and switch to the Normal mode.
After 30 seconds without operation, the keypad goes back to the Normal mode.
Default admin code :123456
Remark
Correct operation: 1 beep and the LED light blinks once.
Wrong operation: 2 beeps and LED light blinks twice.
8
Register the ES-K1A in the control panel
Make sure the control panel is in Connectionmode (refer to the user manual of your eTIGER
alarmsystem).
Press Arm [ ] orHome Mode [ ] on the
keypad to unlock it.
Type your user code or admin code on the
keypad, and then pressany of the Arm
[], Disarm [ ] orHome Mode [ ] keys.
Your hearshort beeps: the registrationhas
succeeded.
Default admin code :123456. Default user code : 1234
The control panel of your alarm system can be controlled from distance on the keypad
once the latter has been registered in the control panel.
Connect the ES-K1A to an eTIGER siren
The ES-K1A can be connected to an eTIGER indoor or outdoor siren, which enables you
to trigger the siren by pressing the [SOS] key on your keypad.
To connect the keypad to an eTIGER siren, set the wireless siren to Connection Mode
(refer to the manual of your eTIGER siren if necessary). Press the Arm[ ] or Home Mode
[] key on the keypad to switch to Normal Mode. Then type [your admin code or user
code] and press any of the Arm [ ], Disarm [ ] or Home Mode [ ] keys on the keypad.
For more information on sirens and accessories compatible with eTIGER security
systems, visit our website etiger.com
9
Register an RFID tag in the ES-K1A
1. Press Arm [ ] or Home Mode [ ] on the keypad
to unlockit.
Then type [admin code + #] to enter Setup mode.
Default admin code: 123456
If you hear2 beeps, the code you have typed is wrong.
2. Type [41#]. You hearone beep and the LED
indicator lights up: the keypad switches to
Connection mode.
3. Swipe the RFID tag infront of the RFID reader. You
hear one beep: the connection is successful.
If you hear two beeps, the RFID tag has already been
connected.
Press [*] to exit Setup Mode.
To clear all registered RFID tags, press any of the Arm [ ] or Home Mode [ ] keys on the
keypad to unlock it, and then type [admin code+#42#]. You hear one beep: the RFID tags
have been deleted from the keypad.
10
Usage
The keypad can be used as a remote control. Your user code or your admin code will be
required before arming or disarming the system, or switching to Home Mode or Mute
Mode.
Arm the system
1. Press Arm [ ] or Home Mode [ ] on the keypad
to unlockit.
2. Type your user code or admin code.
3. Press the Arm key []. The LED indicator blinks
once, the keypad beeps once and sends to the
control panel the signal to arm the system.
When the alarm panel receives the signal, the siren beeps once and the Arm indicator on
the control panel lights up. The alarm system is now armed.
Default admin code :123456, default user code :1234
Disarming the system with the keypad
1. Press Arm [ ] or Home Mode [ ] on the keypad
to unlockit.
2. Type your user code or admin code.
3. Press the Disarm button [ ]: the LED indicator
blinks once, the keypad beeps once and sends to
the control panel the signal to disarm the system.
When the control panel receives the signal, the siren beeps twice and the Disarm
indicator lights up: the alarm system is now disarmed.
Indice
