SMART-AVI HDC-IR Manuale utente

TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 25’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Green LED

IR-EYE

IR Frequency Range 30 KHz to 80 KHz

Capture Distance Up to 10’

Cable Connector 3.5 mm stereo jack

IR Signal Indicator Red LED

OTHER

Power 12VDC 2A

Cable Link CAT5 568A or 568B

Dimensions 2.5” W x 2.5” D x 1.0” H

Weight .25 lb

Operating Temp. 0°C ~ 40°C / 32°F ~ 104°F

Storage Temp. -20°C ~ 70°C / -4°F ~ 158°F

Relative Humidity Up to 95%

PART NO. QTY DESCRIPTION

HDC-IR 2 IR CAT5 Point to Point

SM-LED 1 IR Emitter

SM-EYE 1 IR Eye (Optional)

PS12VDC2A 2 Power supply 12VDC2A

1 Quick Start Guide

DESIGNED

AND MADE

IN THE USA

NOTICE

The information contained in this document

is subject to change without notice. iPGARD

makes no warranty of any kind with regard

to this material, including but not limited to,

implied warranties of merchantability and

tness for a particular purpose. iPGARD

will not be liable for errors contained

herein, or for incidental or consequential

damages in connection with the furnishing,

performance, or use of this material. No

part of this document may be photocopied,

reproduced, or translated into another

language without the prior written consent

from iPGARD, Inc.

20170518

Toll Free: (888)-994-7427

Phone: (702) 800-0005

Fax: (702)-441-5590

WWW.iPGARD.COM

A full manual can be downloaded from

www.smartavi.com/hdc-ir/

HDC-IR

IR CAT5 Point to Point Extender

USES A SINGLE CAT5

TO BROADCAST IR

UP TO 1000FT AWAY(333M

Quick Start Guide

The HDC-IR range of products allow the

extension of Infra Red control signals using

single CAT5 UTP (category 5, unshielded

twisted pair) cable. The HDC-IR is the rst

product for this application.

• Uses easy to install, inexpensive CAT5

• Output reaches up to 1000 feet (300 m)

• Sends IR and Power signals over CAT5

• High ground loop immunity

• Built-in lightning, power surge and

transient protection

• Remote Units come with Buffered Outputs

• Compact Enclosure

• Optional power supply for remote unit

• Fully compliant with standard modulated

IR and the latest IRDA

• Fully transparent path for all protocols

and data transfers

• Bi-directional IR

• Supports any IR Remote Control

IR-EYE

IR-LED

INTRODUCTION

FEATURES

HARDWARE INSTALLATION

1. Connect the IR LED to the IR window on the source device.

2. Connect power supply to the unit. Observe LED lighting up indicating power present.

3. Connect IR LED to the IR window on the souce device.

4. Connect the IR Eye to the Receiver.

5. Observe LED lighting indicating power present.Connect the speakers to the Audio Out port.

6. Connect the transmitter to the receiver using Category 5 UTP cable (Purchased separately).

The CAT 5 UTP cable, if purchased in bulk, will be wired using 568A or 568B wiring standard.

7. Once connected, check that the power LEDs on both the receiver and the transmitter are

on, IR status LED is on and RX LED is ashing when Remote control is used indicating that

communication is in progress

CAT5

DVD Player DVD Player DVD Player

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

IR-In Out-1 Out-2 Out-3

HDC-IR

IR extender over Twisted Pair

HDC-IR

CONTROL

Altri manuali SMART-AVI Estensione

SMART-AVI

SMART-AVI HDX-W100 Manuale utente

SMART-AVI

SMART-AVI DVX-2P Manuale utente

SMART-AVI

SMART-AVI SDX-XT Manuale utente

SMART-AVI

SMART-AVI DVX-200 Manuale utente

SMART-AVI

SMART-AVI HDX-W100S Manuale utente

SMART-AVI

SMART-AVI KLX-500 Manuale utente

SMART-AVI

SMART-AVI DVX-4P Manuale utente

SMART-AVI

SMART-AVI FDX-2500 Manuale utente

SMART-AVI

SMART-AVI HDX-LX Manuale utente

SMART-AVI

SMART-AVI XT-800 Manuale utente

SMART-AVI

SMART-AVI RDU-2P Manuale utente

SMART-AVI

SMART-AVI DVS200 Manuale utente

SMART-AVI

SMART-AVI XTPro Xtreem Manuale utente

SMART-AVI

SMART-AVI FDX-S2U Manuale utente

SMART-AVI

SMART-AVI RK-DVX2U-A-RX4S Manuale utente

SMART-AVI

SMART-AVI UTX-500 Manuale utente

SMART-AVI

SMART-AVI USB2-Mini Manuale utente

SMART-AVI

SMART-AVI SDX-2P Series Manuale utente

SMART-AVI

SMART-AVI DPX-1P-Plus Manuale utente

SMART-AVI

SMART-AVI FVX-2000 Manuale utente

SMART-AVI

SMART-AVI DVS400 Manuale utente

SMART-AVI

SMART-AVI SDX-XT-4P Manuale utente

SMART-AVI

SMART-AVI SDX-XT Sseries Manuale utente

SMART-AVI

SMART-AVI KLX-500-DUO Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente