Smart Eye AI-X Manuale utente

AI-X
User Guide
Version 10.1

Contents
1 Introduction ......................................... 1
1.1 Intendeduse ...................................... 1
2 Software and System Requirements ........................... 2
2.1 Systemrequirements ................................. 2
2.2 Compatiblesoftware.................................. 2
3 AI-X Hardware ........................................ 3
3.1 What’sinthebox.................................... 3
3.2 Productcare ...................................... 3
4 Setup ............................................. 4
4.1 Softwareinstallation .................................. 4
4.2 Mounting the eye tracker on a display . . . . . . . . . . . . . . . . . . . . . . . . 5
4.3 Create an eye tracker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.3.1 Displaysetup.................................. 6
4.3.2 Phonesetup .................................. 7
5 Support ............................................ 8
5.1 Troubleshooting..................................... 8
5.2 IR light interfering with other systems . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.3 Customersupport ................................... 8
Appendix A Safety and Compliance ............................ 9
A.1 Compliance....................................... 9
A.2 OperatingTemperature ................................ 9
Appendix B Technical Specifications ........................... 10

1 Introduction
The Smart Eye AI-X is a screen-based high-performance eye tracker. The AI-X design makes
it easy to switch between different projects, displays, and situations.
This manual contains useful information about the AI-X eye tracker, ranging from safety and
compliance to product care. It also contains information about the mounting procedure and
software setup. If any questions or difficulties arises, do not hesitate to contact the support.
1.1 Intended use
The AI-X eye tracker is designed for screen-based eye tracking research within marketing, UX
and media. The AI-X works well in all indoor illumination conditions, and offers precise and
accurate eye tracking on displays up to 24”.
Smart Eye AI-X eye tracker

2 Software and System Requirements
2.1 System requirements
Operating System Windows 10 Creators Update (version 1703) or higher
RAM 4 GB
CPU Quad core 6th generation Intel Core or Intel Xeon processor
or newer
Camera Interface USB 3.0
Maximum Display Size 24” (16:9 aspect ratio)
2.2 Compatible software
iMotions www.imotions.com

3 AI-X Hardware
3.1 What’s in the box
AI-X eye tracker
Two Chem Pad™ wipes for cleaning the mounting area
Two mounting brackets with tape
Safety and setup info note
3.2 Product care
The front glass of the eye tracker needs to be clean in order to ensure optimal tracking. If dirt
or dust ends up on the front glass, the eye tracker has to be cleaned in a correct manner.
To clean the front glass use a dry microfiber cloth intended for cleaning cameras, camera
lenses, or eyeglasses and carefully wipe the front glass. If unsupported cleaning methods are
used the eye tracker might be damaged.
Warning! Do not use alcohol to clean the front glass, as it may damage the eye tracker!

4 Setup
4.1 Software installation
The software Smart Eye Tracker needs to be installed before using your eye tracker. Follow
the installation steps below.
1. Launch the Smart Eye Tracker installer by double clicking it.
2. Click the Install button to start the installation.
3. A User Account Control window will be opened, click Yes to continue.
4. A Windows Security window will be opened, click Install to install eye tracker drivers. The
installation may take a while.
5. Click the Close button when the installation has finished to exit the installer.

4.2 Mounting the eye tracker on a display
The mounting bracket and Chem Pad™ wipe can be found in the box. To mount the eye tracker
follow the steps below:
1. Find the center of the lower display edge by marking manually or by using the center
marker in the Smart Eye Setup Tool.
2. Clean the mounting area around the center with the Chem Pad™ wipe.
3. Remove the adhesive tape cover from the bracket.
4. Align the center of the bracket with the center of the lower display edge. Make sure the
bracket is straight. Press and hold for 30 seconds.
5. Attach the eye tracker to the bracket and connect the eye tracker to the computer using
the supplied cable. If the cable is of type USB-A, make sure to connect it to a USB 3.0
port on the computer.

4.3 Create an eye tracker setup
1. Run the Smart Eye Setup Tool. The Smart Eye Setup Tool is found in the Windows Start
Menu.
Smart Eye Setup Tool
2. Select your eye tracker.
3. Create a new setup by pressing the New Setup button.
4. Select your device type and press Next. Follow the steps in the section of the chosen
device below.
4.3.1 Display setup
1. Specify on which display your eye tracker is mounted (if you have a single display setup,
this step is not necessary). Click the Identify button if you are not sure which display your
eye tracker is mounted to. To be able to identify your display a unique letter will be shown
on each display connected to your computer.
2. Click the Next button. A full screen window will be opened on the display that your eye
tracker is mounted to.

Setup window
3. Setup your eye tracker by aligning the dashed lines to the edges of the eye tracker. Con-
firm the setup by pressing Enter.
4. Check that the size in the setup summary matches the size of the selected display.
5. Enter a file name for your setup and press Finish. The setup has now been saved and
the Smart Eye Setup Tool can be closed.
4.3.2 Phone setup
1. Enter measurements of your phone and press Next. Note that the bezel size is the
distance between the top of the phone and the top most edge of the screen (not including
any indentations in which the front-facing camera is positioned).
2. Check that the size in the setup summary matches the size of your phone.
3. Enter a file name for your setup and press Finish. The setup has now been saved and
the Smart Eye Setup Tool can be closed.
Altri manuali per AI-X
1
Indice
Altri manuali Smart Eye GPS




















