SMART Slate WS200 Istruzioni per il montaggio
SMART Slate WS200 Quick Connect Tips
SMART Slate WS200
SMART Slate WS200 Quick Connect Tips
Setting Up Your SMART Slate
1. Attach the Pen Tether – the tether connects the pen to the slate so you
don’t misplace the pen.
2. Remove the Battery-Insulating Film – open the battery compartment to
remove the insulating film.
3. Connect the USB charging cable to your slate and your computer connected
to the Smart Board. (The slate starts charge and the power LED glows
green.)
4. Install the Wireless adapter installation CD into your computer’s CD drive,
and then follow the on-screen instructions. (This is the small CD located
inside of the Mini USB Adapter package)
5. Connect the USB wireless adapter to your computer’s USB receptacle.
6. After you install the USB wireless adapter, you will need to create a
wireless connection between your slate and your computer.
Slide the power switch to the on Position.
Press the Connect button on the back of the slate. (The status LED on
the slate blinks green.)
7. Double-press the Bluetooth icon in your computer’s
notification area (located in the bottom right corner of
SMART Slate WS200 Quick Connect Tips
your desktop.
The
Bluetooth Settings
window appears.
Press New Connection (The Add New Connection Wizard appears.)
Select the Express Mode check box, and then click Next.
Click SMART Slate WS200 in the list of devices, click Next, and then
complete the steps in the connection wizard.
(If it asks for a pass key, type 0000 in the pass key box, and then click
Next.)
To Print an Underlay
1. Press the SMART Board icon in your computer’s notification area, and then
select Control Panel.
2. Press SMART Hardware Settings and if you have more than one SMART
product connected, press SMART Slate.
3. Select Set Up Underlay and Icon Strip from the first drop-down list.
4. Select an existing underlay from the color scheme drop-down list.
5. Press Print.
The
Print
dialog box appears.
6. In your printer preferences, select landscape orientation, and then print the
underlay.
SMART Slate WS200 Quick Connect Tips
To Install the Underlay:
1. Trim the excess paper from the edges of the
underlay.
2. Lift the underlay cover from the lower right
corner with your fingers.
3. Slide the underlay beneath the underlay
cover.
Customizing Your Smart Slate
You can customize many of your slate’s features from the SMART Notebook
Control Panel. You can change the functions of buttons, change digital ink styles,
create a custom icon strip on a paper underlay and change other features.
1. Press the SMART Board icon in your computer’s notification area, and then
select Control Panel.
The SMART Notebook control panel appears.
2. Press SMART Hardware Settings.
NOTE
If you have more than one SMART product connected to your computer,
press SMART Slate in the list of devices.
Troubleshooting
You can determine whether your slate is
connected by the color of the Bluetooth icon.
The following table describes what the
different colors of the Bluetooth icon mean:
Re-establishing the Wireless Connection
If you restart your computer while your SMART Slate is wirelessly connected,
your computer is unable to find the slate and the slate’s status LED glows amber.
Altri manuali per Slate WS200
5
Indice
Altri manuali SMART tavoletta grafica
