10
Rev. 1.0.0 www.smartinterface.de · info@smartinterface.de
Table des matières
1.0 Place dive computer between the pins on the ‚workbench‘ and
attach the wristbands with the ‚workbench‘s‘ rubberbands. 2
2.0 Place wrench onto lunette ideally in a one o‘clock position (cogs must grip, horizontally). 2
2 .1 Turn the wrench counterclockwise (lunette fits very tight) 3
2.2 Unscrew lunette by hand. 3
3.0 Remove lunette/fixing ring and lid and place it aside. 4
3 .1 Remove O-ring from the nut without using a tool. 4
3.2 Remove old battery. Clean lunette and housing dryly and without using tools. Dispose of the
battery by using public waste collection points. Don‘t throw it in the household waste. 5
4.0 Take new battery out of the packaging and insert with the + pole pointing upwards. 5
4 .1 Insert O-ring (Make sure O-ring is free from grease!). 6
4.2 Place lid back onto the housing. For correct positioning use mark. 6
5.0 Place lunette on top and screw lunette clockwise by hand. 7
5 .1 Place wrench tool onto lunette. 7
5.2 Firmly tighten lunette by firmly turning it clockwise. 8
